Finding your suitable north bridge chipset is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best north bridge chipset including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. ASRock 970A-G/3.1 Socket AM3+/ AMD 970/ DDR3/ Quad CrossFireX/ SATA3&USB3.1/ M.2/ A&GbE/ ATX Motherboard
Feature
CPU: Socket AM3+/AM3, Chipset: North Bridge AMD 970 & South Bridge AMD SB950.Supports Socket AM3 processors: AMD Phenom II X6 / X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / Sempron processorsMemory: 4x DDR3-2400+(OC)/ 2100(OC)/ 1866(OC)/ 1800(OC)/ 1600(OC)/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 64GB
Slots: 2x PCI-Express 2.0 x16 Slots (one runs x4), 2x PCI-Express 2.0 x1 Slots, 1x PCI Slot
SATA: 6x SATA3 Ports, M.2: 1x M.2 Port, Support M.2 PCI-Express 2.0 x4
Ports: 2x USB 3.1 Ports (1 Type-A, 1 Type-C), 4x USB 3.0 Ports (2 rear, 2 via header), 8x USB 2.0 Ports (4 rear, 4 via headers), 1x PS/2 MousePort, 1x PS/2 Keyboard Port, 1x Optical S/PDIF Out, 1x RJ45 LAN Port, Audio I/O Jacks
Form Factor: ATX
Description
ASRock 970A-G/3.1 Socket AM3+/ AMD 970/ DDR3/ Quad CrossFireX/ SATA3&USB3.1/ M.2/ A&GbE/ ATX Motherboard2. ASUS A8N5X K8N4-E SE/Deluxe A8N-E/SLI/SLI SE North Bridge Chipset Cooler Fan
Feature
Each order includes: one replacement fan with push pins show in pictureKnown Compatible Asus Motherboard: K8N4-E Deluxe, K8N4-E SE, A8N-E, A8N-SLI, A8N-SLI SE, A8N-SLI Deluxe, A8N-SLI Premium, A8N32-SLI Deluxe, A8N5X and etc.
Description
Kit includes One (1) repair fan with two (2) push pins. Shown in the picture. Repair steps: 1. Use cutting pliers to cut off the two plastic pin on the side of the fan and get the fan out. (Refer to picture #1) 2. Take out the four screws from the back of the heat sink and get the old fan removed after taking another 3 screws out. (Keep the screws and you will use them again) 3. Replace the fan in the old case and reuse the old case. (Refer to picture #3). Then put the top cover back. 4. Use the push pins provided (Refer to picture #2) and push the fan back to the motherboard. Repair takes about 10 minutes.3. uxcell Aluminum Computer PC North South Bridge Chipset Heat Sink Cooling Fin Black
Feature
Good Cooling,Easy InstallationSize : 38 x 38x 10mm / 1.49" x 1.49" x 0.4"(L*W*H)
Keep your pi cool while working
Reduce the risk of hardware failure due to overheating
Strong heat conductivity and heat dissipation
Description
Widely use for computer PC chipset, power IC, power electric device, etc.Use heatsink adhesive glue to install heatsink .Glue is not included here.
Please check the specification table and make sure that the size of the heatsink fits that of your component.
4. Forgun PC Northbridge Chipset Aluminium Cooler Heatsink 40mm Fan for 3D Printer Cooling
Feature
color: black + orangeFan Size: 404010mm
Material: Plastic + Aluminum Alloy
Package includes: 1 x Radiator fan
40x40x10mm 12V 3-pin cooling fan for computer motherboard north bridge.
Description
description:40x40x10mm 12V 3-pin cooling fan for computer motherboard north bridge.
100% brand new and high quality.
It is easy to use.
Features:
Convenient to paste in to your north bridge.
Material: Plastic + Aluminum Alloy
Keeps computer working well.
Specifications:
Fan Size: 404010mm
color: black + orange
Voltage: DC 12V
Rated Current: 0.087Amp 10%
Fan Speed: 5500 RPM10%
3pin Connector:
bearing, sleeve bearing
Air Flow: 10-28CFM
noise level: 16 - 25dba
Life: 35000 hours
Quantity: 1 PC (other accessories demo in the picture is not included)
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
the picture may not reflect the actual color of the item. Thank you!
3.Due to the difference between different monitors
Package includes: (No retail package)
1 x PC North Bridge Chipset Cooling Heatsink Fan
5. 100 pcs White Transistor Plastic Washer Insulation Washer + Pads Silicone TO-220
Feature
Scope: GPU graphics card, memory, north and south bridge chip, memory chipset, IC LED LCD and so on.Function: Used in CPU GPU VGA Card and IC.
Size: Approx. 19 x 13mm (L*W)
6. Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin For Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR,South bridge,North bridge, With 3M 8810 Thermally Conductive Heat Transfer Tape
Feature
10 pcs of aluminum heat sinks with 3M 8810 Thermally Conductive Heat Transfer Tape.Overall Size : 22 x 22x 10mm/ 0.87" x 0.87" x 0.4" (L*W*H)
Weight : 20g
Compatible with Raspberry Pi 2, Raspberry Pi B/B+ , Raspberry Pi A/A+ , South Bridge , North Bridge , VGA RAM , MOSFET , DC Boost Power Converter , Power Converter etc........
Description
Specification :
Package Include :
10x Aluminum Heat Sinks
10x 3M Thermally Conductive Heat Transfer Tape (All Pad Are Not Pre Assembled .Assembly Required)
1 x Gift Cable Ties(charging cable does no include) every unit will receive one extra bonus if you don't received please contact us we will send you the gift.
If for any reason you are unhappy with any product by GADGETER, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
7. Gigabyte AM3+ AMD 970 SATA 6Gbps USB 3.0 ATX AM3+ Socket DDR3 1600 Motherboards (GA-970A-DS3P)
Feature
Socket AM3+Chipset: North Bridge AMD 970 & South Bridge AMD SB950
Memory: 4x DDR3-2000(OC)/1866/1600/1333/1066 DIMM Slots, Dual Channel, Max Capacityof 32GB
Slots: 2x PCI-Express 2.0 x16 Slots (one runs at x4), 3x PCI-Express 2.0x1 Slots, 2x PCI Slots
CPU: AMD AM3+ FX processors; AMD AM3 Phenom II processor/ AMD Athlon II processor
Memory: 4x1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory; DDR3 2000(O.C)/1866/1333/1066 MHz
LAN: Realtek GbE LAN chip (10/100/1000 Mbit)
Expansion Slots: 1 x PCI Express x16 slot, running at x16 (PCIEX16); 1 x PCI Express x16 slot, running at x4 (PCIEX4);3 x PCI Express x1 slots; 2 x PCI slots
Storage Interface: 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices; Support for RAID 0, RAID 1, RAID 5, and JBOD
USB: Up to 12 USB 2.0/1.1 ports; 4 USB 3.0/2.0 ports