Finding your suitable 3m 8810 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best 3m 8810 including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Thermal Interface Products Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm (1 piece)
Feature
Adafruit Part Number: 1468Stock Type: Components & Parts >> Heat Sinks
In Stock & Ready to Ship
Description
Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our range of small heat sinks, either in aluminum or copper.
Comes in a square of 80mm x 80mm (3" square) - but can be cut into any shape or size.
For more information about 3M's 8810 thermal tape check out the datasheet
Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm ( 0:13 )
2. 3M 12.8mm-19mm-25-8810 Thermally Conductive Adhesive Transfer Tape 8810, 0.5" Wide, 0.02 yd. Length, White (Pack of 25)
Feature
Used for creating a heat transfer path between heat generating components and heat sinks or other cooling devicesHigh mechanical strength
Improved surface wet-out for rough surface/LSE substrates
Description
3M's highest mechanical strength thermally conductive tape, also offering improved surface wetout and excellent shock performance. 10 mils thick, 8.3 N/cm peel strength.3. 3M 8810 Thermally Conductive Adhesive Transfer Tape, 19.05mm width x 10.54mm length (10/pack)
Feature
Used for creating a heat transfer path between heat generating components and heat sinks or other cooling devicesNo heat cycle required to bond surfaces, only needs pressure to adhere
Excellent thermal stability
Good thermal conductivity and electrical insulation
Industrial grade tape product
Description
3M's highest mechanical strength thermally conductive tape, also offering improved surface wetout and excellent shock performance. 10 mils thick, 8.3 N/cm peel strength.4. Easycargo 15 pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 thermal conductive adhesive tape for cooling cooler Raspberry Pi 3 B+, Pi 3 B, Pi 2, Pi Model B+
Feature
Suitable for Raspberry Pi 3 B+, 3, 2, A, B, B+ boardsIncludes 10 pcs black anodized aluminum + 5 pcs copper heatsink
Thermal conductive adhesive tape backing
Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc
Raspberry pi not included
Description
Includes 10 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 and 3 B+ boards. These pure aluminum (10 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)5. 3M 18.8mm-15.24mm-25-8810 Thermally Conductive Adhesive Transfer Tape 8810, 0.74" Wide, 0.02 yd. Length, White (Pack of 25)
Feature
Used for creating a heat transfer path between heat generating components and heat sinks or other cooling devicesHigh mechanical strength
Improved surface wet-out for rough surface/LSE substrates
Description
TapeCase thermally conductive adhesive transfer tape Converted from 3M 8810, is a 10.0 mil thermally stable industrial grade tape product used to create heat transfer paths from heat generating components to heat sinks or other cooling devices. In addition to providing excellent thermal conductivity, this product will provide electrical insulation between the bonded substrates. Featuring a pressure sensitive adhesive, this tape will not require any heat treatment to bond surfaces.6. Ceatech 25m x 20mm x 0.20mm Thermal Tape Double Side Adhesive for Heatsink, CPU,GPU, High Power LED, IC Chip Set, Modules, SSD Drives
Feature
Ceatech thermal tape conductive with high thermal conductivity performance and insulation, strong adhesion, which can be tightly and firmly fit the heat source devices and heat sink. This strong adhesion and small thermal resistance features effectively replace the grease and mechanical fixation, Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced screw fixed, to achieve the most effective thermal dissipation.Wide Application - The double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickiness, while improving the work efficiency. It is widely used for high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, high voltage, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar, new energy heating power devices.etc,
Safe Application - The double side adhesive Thermal tape is metal-free, and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU and VGA cards.
Easy to use - Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
High Durability: Once applied, you do not need to apply it again as it will last at least for 5 years.
Description
CEATECH only sell high quality thermal conductive tape, you will be pleased to get right one. Specification:
Dimension: 20mm x 25m
Glass fiber thickness: 0.2mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.3kg/inch
180Adhesion power: >16 N/25mm
Heat Resistance: 120C (long time), 180C ( short time)
Application:
Used for attaching heat sink to CPU GPU, high power LED, chip set, LED TV field, Video Card RAM, DDR Memory Modules, SSD drives.
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (80-120 ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
7. BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
Feature
Package included 1rollSize (W x L): 20mm x 25m; Material: glass fiber+ rubber; Strong adhesive
Used for attaching heatsinks to CPU GPU, high power LED, etc.
Double Side Adhesive Thermal Conductive Tape for hesatsink led
Noted: heatsink is not included
Description
Product Specification:
Glass fiber thickness: 0.1mm
Thermal Conductivity:1 W/m-k
Breakdown Voltage: 3KVAC
Thermal impedance : 0.3in2/w
Adhesive power:6.5 N/cm
Volume resistance: 3X1013ohm/cm
Applicable temperature range:-20~+120 C
8. 3M 21.59mm-7.62mm-25-8810 Thermally Conductive Adhesive Transfer Tape 8810, 0.85" Wide, 0.01 yd. Length, White (Pack of 25)
Feature
Used for creating a heat transfer path between heat generating components and heat sinks or other cooling devicesHigh mechanical strength
Improved surface wet-out for rough surface/LSE substrates
Description
TapeCase thermally conductive adhesive transfer tape Converted from 3M 8810, is a 10.0 mil thermally stable industrial grade tape product used to create heat transfer paths from heat generating components to heat sinks or other cooling devices. In addition to providing excellent thermal conductivity, this product will provide electrical insulation between the bonded substrates. Featuring a pressure sensitive adhesive, this tape will not require any heat treatment to bond surfaces.9. Aikenuo 25m x 20mm x 0.15mm Thermal Adhesive Tape,High performance Thermal Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules, MOS tube,SSD Drives
Feature
Aikenuo thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.15mm
Thermal Conductivity: 1.5 W / m-k
Breakdown Voltage: 5KVAC
Thermal resistance: 0.3 C in2 / w
Initial Adhesion: 1.5kg / inch
180 Adhesion power:> 18 N / 25mm
Applicable temperature range: -30 ~ + 150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30 ~ + 150 C) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductor double-sided tape, keep the adhesive surface clean and dry
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape has initial viscosity and aging viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4. of the paste process, the appropriate heating (60 ~ 70 C), the post to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
10. 25Mx20mmx0.25mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS Tube,SSD Drives And More
Feature
Aikenuo Thermal Conductivity Double Sided Adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor,Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
Description
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.5kg/inch
180Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape