Related posts

Feature

Ceatech thermal tape conductive with high thermal conductivity performance and insulation, strong adhesion, which can be tightly and firmly fit the heat source devices and heat sink. This strong adhesion and small thermal resistance features effectively replace the grease and mechanical fixation, Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced screw fixed, to achieve the most effective thermal dissipation.
Wide Application - The double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickiness, while improving the work efficiency. It is widely used for high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, high voltage, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar, new energy heating power devices.etc,
Safe Application - The double side adhesive Thermal tape is metal-free, and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU and VGA cards.
Easy to use - Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
High Durability: Once applied, you do not need to apply it again as it will last at least for 5 years.

Description

CEATECH only sell high quality thermal conductive tape, you will be pleased to get right one.

Specification:
Dimension: 20mm x 25m
Glass fiber thickness: 0.2mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3in2/w
Initial Adhesion: 1.3kg/inch
180Adhesion power: >16 N/25mm
Heat Resistance: 120C (long time), 180C ( short time)

Application:
Used for attaching heat sink to CPU GPU, high power LED, chip set, LED TV field, Video Card RAM, DDR Memory Modules, SSD drives.

Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long, normal temperature (80-120 ) can work for a minimum of 5 years.

Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.

Package included:
1 Roll Thermal Conductive Double-sided Tape