Which is the best angle tool digital?

Finding the best angle tool digital suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Product Features Editor's score Go to site
Bosch GAM 220 MF Digital Angle Finder Bosch GAM 220 MF Digital Angle Finder
Go to amazon.com
Tacklife MDA01 Digital Protractor 7 Inch Angle Finder Stainless Steel Ruler With HOLD and Zeroing Function, Large LCD Display, Coin Battery Included for Woodworking, Construction, Repairing Tacklife MDA01 Digital Protractor 7 Inch Angle Finder Stainless Steel Ruler With HOLD and Zeroing Function, Large LCD Display, Coin Battery Included for Woodworking, Construction, Repairing
Go to amazon.com
GemRed 82305 Digital Angle Finder 7-Inch Protractor (200mm Stainless Steel Angle Finder Ruler) GemRed 82305 Digital Angle Finder 7-Inch Protractor (200mm Stainless Steel Angle Finder Ruler)
Go to amazon.com
Johnson Level & Tool 750 Pitch and Slope Locator Johnson Level & Tool 750 Pitch and Slope Locator
Go to amazon.com
Wixey WR300 Digital Angle Gauge Wixey WR300 Digital Angle Gauge
Go to amazon.com
Digital Angle Ruler with LCD Display Angle Finder Protractor Gauge Ruler 200mm 8 Digital Angle Ruler with LCD Display Angle Finder Protractor Gauge Ruler 200mm 8" Measure Tools
Go to amazon.com
DigiPas DWL80E Pocket Size Digital Level, Electronic Angle Gauge, Protractor, Angle Finder, Bevel Gauge, 0.1, 4 inch DigiPas DWL80E Pocket Size Digital Level, Electronic Angle Gauge, Protractor, Angle Finder, Bevel Gauge, 0.1, 4 inch
Go to amazon.com
General Tools 822 Digital Angle Finder Rule, 5-Inch General Tools 822 Digital Angle Finder Rule, 5-Inch
Go to amazon.com
Wixey WR365 Digital Angle Gauge and Level Wixey WR365 Digital Angle Gauge and Level
Go to amazon.com
TayTools 300 mm 12 TayTools 300 mm 12" 2 in 1 Digital Protractor Digital Goniometer Digital Angle Finder Ruler with Stainless Steel Blades 114110
Go to amazon.com
Capri Tools 20005 Digital Angle Gauge Capri Tools 20005 Digital Angle Gauge
Go to amazon.com
Johnson Level & Tool 1886-0000 Magnetic Digital Angle Locator Johnson Level & Tool 1886-0000 Magnetic Digital Angle Locator
Go to amazon.com
General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One
Go to amazon.com
MLCS 9319 0 to 180 Degree Digital Angle Ruler/Protractor MLCS 9319 0 to 180 Degree Digital Angle Ruler/Protractor
Go to amazon.com
General Tools 836 ANGLE-IZER Template Tool General Tools 836 ANGLE-IZER Template Tool
Go to amazon.com
GemRed Digital Level Angle Slope (NO.82112 Level without Magnetic Base(RED)) GemRed Digital Level Angle Slope (NO.82112 Level without Magnetic Base(RED))
Go to amazon.com
Related posts:

Reviews

1. Bosch GAM 220 MF Digital Angle Finder

Feature

Four tools in one: angle finder, miter calculator, protractor and level
Stores angle measurements in memory for repeated use
Easy-to-read illuminated, rotating flip display; Measures from 0-220
Leg extension - 16-Inch long
Manual angle finder leg lock, to reposition the same angle

Description

The Bosch GAM 220 MF Digital Angle Finder is four tools in one: an angle finder, a cut calculator, a protractor and a level. The flip display is illuminated and rotating, making it easy to read. The simple miter cut calculation has an input range of 0-220, and it includes a compound cut calculator. It has clearly labeled buttons for straightforward calculations. This angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite. The tool has robust housing with IP 54 protection. Its a perfect tool for carpenters, remodelers and contractors. Includes: (1) Digital Angle Finder; (1) Leg Extension; (1) Hard Thermoformed Case; (4) AA 1.5-Volt Batteries

2. Tacklife MDA01 Digital Protractor 7 Inch Angle Finder Stainless Steel Ruler With HOLD and Zeroing Function, Large LCD Display, Coin Battery Included for Woodworking, Construction, Repairing

Feature

NICE QUALITY - Durable stainless steel body can provide long time using; Working more than 2000 hours with one piece of CR2032 coin battery(Included)
EASY MEASURE - Protractor comes with a large easy-to-read LCD display; Measuring Range: 0~999.9; Accuracy 0.3; resolution 0.1; Relative and absolute angle measurement; HOLD and zeroing function
ZEROING & LOCKING - Zeroing at any angle for relative measuring with one button; Locking screw for holding measured values in any times; Automatically shut down after 6 minutes of inactivity
NICE DESIGN - Digital stainless steel ruler and angle finder combo makes precise measurements; Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles
WHAT YOU GET - Tacklife MDA01 Digital Angle Finder, User Manual, 24 months Warranty, CR2032 3V Lithium Battery

Description

Tacklife - Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.

Features
1.Convenient Locking Screw - By pressing the screw, the ruler could be hold at any angles
2.Durable stainless steel Body - Stainless steel rulers ensure years of using
3.Etched Measurement - Etched measurement provides lifetime clear reading
4.Low Power Consumption - Working more than 2000 hours with one piece of CR2032 coin battery
5.Auto Off - Automatically shut down after 6 minutes of inactivity


Specifications
Material: Stainless steel
Length: 400mm
Measuring range: 0~999.9
Resolution: 0.1
Accuracy: 0.3
Working temperature: 0~50
Working humidity: 85%RH
Battery: CR2032 3V lithium battery (INCLUDED)


Package content:
1* Tacklife MDA01 Digital Angle Finder
1* User Manual
1* CR2032 3V Lithium Battery
1* 24 month Warranty


Notes
1.Do not move the screws and components at random
2.Be careful to use the ruler and avoid cut yourself
3.Do not give the product to the child alone
4. Please handle your angle meter with care, use even strength to rotate the Rotate Arm, and do not use too much strength


3. GemRed 82305 Digital Angle Finder 7-Inch Protractor (200mm Stainless Steel Angle Finder Ruler)

Feature

Ruler and protractor combination for easy measuring. Durable stainless steel body provide years' using. Total length 400mm.
Accuracy 0.3; resolution 0.1. Working temperature: -10 ~+50
Quick and clear digital readout.
Zeroing at any angle for relative measuring. Locking screw for holding any angle.
Working more than 2000 hours with one piece of CR2032 coin battery(included).

Description

GemRed 2in1 Angle Finder

4. Johnson Level & Tool 750 Pitch and Slope Locator

Feature

Pitch and slope locator designed for easy use
Features patented printed scale for reading pitch without conversion
High-impact plastic body, clear acrylic lens
Half of scale printed in 0 - 90 degrees
1-year limited warranty

Description

Made of durable ABS plastic; used to obtain or transfer any angle or pitch. Reads 0 to 90 degrees in 2 quadrants. Reads pitch or slope in inches per foot; printed scale to read pitch in inch rise per 12" run without the use of conversion tables.

5. Wixey WR300 Digital Angle Gauge

Feature

0.1 degree resolution, accuracy, and repeatability
Works great for miter saws and table saws
Resolution 0.05mm, 0.001-inch, 1/64-inch
Magnets attach to saw blades and cast iron table tops
unctions include an ON/OFF button and a ZERO button

Description

Wixey WR300 Digital Angle Gauge

6. Digital Angle Ruler with LCD Display Angle Finder Protractor Gauge Ruler 200mm 8" Measure Tools

Feature

High-quality digital angle finder with 360Degree measuring range, which calculates angles quickly and accurately
Easy&Useful: No more hard work with angles, it helps with finding angles in awkward spots. And it can be locked securely at any position
Practical Angle Ruler: it supports measurement between metric(mm) and imperial(inch), which makes measuring faster, suitable for woodworking, construction and machining
LCD Dispaly: Easy to read display with the extra-large LCD screen, and it has auto on and off as well as push button. The display can be set to zero
What You Get: Every OKPOW product includes 45 days money back, 18 months warranty and 24/7 friendly customer service

Description

45 days money back
18 months warranty
24/7 friendly service


Warm Tips:
You have to set the two rulers together on a flat surface to reset the counter to 0.0 before spreading to the angle.

Wonderful Features:
Auto switch-off after 5 minutes not in use.
Measures 360 with high resolution of 0.05.
Clamp screw to lock the blade at any position.
Easy to read LCD display of angle measurement.
Accurately measures and sets angles at 0.1 accuracy.
Using the zero calibration buttom to make measurement much easier.
Useful for measuring, marking, and setting angles.


Specifications:
Length: 200mm/8"
Material: Stainless Aluminum
Working range: 0-360
Angle precision: 0.1
Operating temperature: -10C - 50 C
Storage temperature: -10 - 60 C
Waterproof Grade: IP 54

Package Included:
1*200mm Digital Angle Finder
1* cr2032 Battery

7. DigiPas DWL80E Pocket Size Digital Level, Electronic Angle Gauge, Protractor, Angle Finder, Bevel Gauge, 0.1, 4 inch

Feature

DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function
EASY RE-CALIBRATION by user back to factory setting with no special fixture required (patented); RESOLUTION: 0.1 (0 & 90), 0.2 for 1 to 89, switchable display between degrees () or slope (%)
STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces
SMART TECHNOLOGY SENSOR; improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope
Measurement Range 0 ~ +/- 90 x 4 (360)

Description

Digi-Pas is a leading digital level manufacturer with a full range of digital levels with varying precision for engineering and trade professionals as well as DYI users. Digi-Pas levels allow you to measure angles digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle. So leveling your 3D printer bed, table saw, installing a deck, stair rail or extending a roof is simpler, less time consuming, and more accurate. Digi-Pas levels are simple to use. The DWL80 series is great for finding angles where small and confined spaces limits the size of the level that one can use. The DWL80E is a mini pocket digital level that allows for easy, clear and precise digital display of any angles in degrees or % of slope. This model has accuracy of 0.1 at 0 and 90 and 0.2 at all other angles. With a magnetic base, the DWL80E can easily attach to metal surfaces. The hold function freezes the reading on the LCD. This unit has longer than average battery life and an automatic 3 mins off feature. The strong impact resistance ABS polymer material casing is molded with a tough aluminum base with built in vials.

8. General Tools 822 Digital Angle Finder Rule, 5-Inch

Feature

Digital stainless steel ruler and angle finder combo makes precise measurements for easy woodworking
Digital protractor has lock and reverse angle functions that make all types of work easy and fast
Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles
Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 5 inches
Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool

Description

'Digital Angle Finder, Measurement Range 0 Degrees to 360 Degrees F, Accuracy +/-0.1 Degrees , Size 5 In., Number of Level Vials 0, Number of Plumb Vials 0, Number of Magnets 0, Power Source Lithium Battery, LCD Display, Housing Material Plastic, Features Lock and Reverse Angle Modes, Jumbo LCD Hinge Mechanism Provides Full 360 Degrees for Measuring Inside and Outside and Reverse Angles, Stainless steel Construction, Can be Zeroed At Any Point In The Swing, Includes Battery'

9. Wixey WR365 Digital Angle Gauge and Level

Feature

Flip-up display for easy viewing from any position
Built-in level display using Dead Level Technology TM is always visible and permanently stored.
"HOLD" feature allows you take a reading and hold the value while you move the gauge to a new position.
The machined aluminum base imbedded with high strength magnets sits perfectly flat for optimum accuracy. It also has a built in "V" groove for use on pipes or conduit.
AAA batteries for super long life

Description

The Wixey WR365 Digital Angle Gauge with Level is a compact digital angle gauge for woodworking, metal working, automotive and many other uses. These compact gauges have become one of the most coveted workshop setup tools for accurately and quickly setting saw blades and machinery tables. They are also great for metal fabrication and other layout and measuring tasks. The 0.1-Degree accuracy and repeatability gives these tiny gauges the accuracy needed for almost any precise project. The WR365 contains many innovative features in its compact 2.2-Inch x 2.3-Inch x 1.3-Inch body.

10. TayTools 300 mm 12" 2 in 1 Digital Protractor Digital Goniometer Digital Angle Finder Ruler with Stainless Steel Blades 114110

Feature

1.375 inch wide by 12 inch long stainless steel blades with photo etched graduationss in mm and quick reading 32nds
Zero function allows setting of zero at any angle point
Strong blade lock holds securely for transfer of measurements
Measuring range: 0-360 degrees
Battery: 3V CR2032 with approximately 5000 hours of continuous use

Description

12 inch 300 mm digital protractor with rule 2 in 1. This super handy and precise digital protractor is perfect for making ultra-precise angled measurements and project layouts. It has the following features: 1) 1.375 inch wide by 12 inch long stainless steel blades with photo etched graduations in mm and quick reading 32nds 2) Closed length 12.4 inches, full open length 23.5 inches 3) Zero function allow setting of zero at any angle point 4) Display reads continuously as arms are adjusted 5) Measures both inside and outside angle measurements 6) Large clear LCD display 7) Strong blade lock holds securely for transfer of measurements 8) Measuring range: 0-360 degrees 9) Powers off after 5 minutes of nonuse 10) Resolution: 0.1 degree 11) Accuracy: +/- 0.3 degree 12) Repeatability +/- 0/1 degree 13) Battery: 3V CR2032 with approximately 5000 hours of continuous use

11. Capri Tools 20005 Digital Angle Gauge

Feature

Super strong magnets enable this gauge to securely attach to saw blades
Automatic LCD backlight has a 0.1 degree resolution display, shut-off feature, and digit inversion
This is an accurate and precise measuring device to help with the best repair work
A custom carrying pouch is included for extra protection and easy access
Works great with miter saws and table saws for producing precise measurements

Description

This Capri Tools digital angle gauge has a variety of applications for setting and measuring angles. The easy to read backlight LCD displays resolution to 0.1 degrees. No need to worry if your table saw isn't perfectly level; just calibrate the gauge with the zero button! This is a useful tool for table saws and miter saws, and for setting the angle of your jointer fence and band saw table. Includes one AAA battery.

12. Johnson Level & Tool 1886-0000 Magnetic Digital Angle Locator

Feature

Ideal for a variety of uses
Features a 2 button design
Automatic LCD backlight
Angle display in degrees
Magnetic base

Description

Johnson level 1886-0000 Magnetic Digital Angle Locator- 2 Buttons, With a Automatic LCD backlight for easy viewing, Automatic digit inversion for overhead measurements, Angle displays in degrees, Has a working range of angle measurement of 4 x 90 degrees and a great magnetic base.

13. General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One

Feature

DURABLE - Commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle
HOLDS MEASUREMENTS- on digital angle finder for transfers between different surfaces or jobs
TRANSITIONAL DISPLAY - Digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Full LCD display with large digital angle readout.
AUTOMATIC SHUT-OFF- feature that preserves battery life of the woodworking tool
DUAL APPLICATION - T-bevel/digital protractor combo- is made with an ergonomic impact resistant handle with 8-inch stainless steel blade used for taking measurements

Description

This highly accurate digital angle finder offers easy-to-read measurements via a large LCD display and has an 8" stainless steel blade and steel locking knob. It is ideal for measuring, storing and transferring inside and outside angles when building cabinetry, furniture and picture frames.

The General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One offers pioneering technology that takes the guesswork out of angle duplication and eliminates the problems associated with manual measurement transfer.

DETAILS:
  • Large LCD
  • Four control buttons provide five functions: Power on/off, Reading hold, Read reverse angle, Flip display, Clear readout
  • Auto power off
  • Stainless steel blade
  • Impact-resistant ABS handle
  • Power source: "CR2032" Lithium-ion battery (included)

SPECIFICATIONS:
  • Range: 0 to 360
  • Accuracy: 0.3
  • Resolution: 0.05
  • Blade length: 8 in.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT.

Offering over 1,000 tools, were proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction guaranteed.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

14. MLCS 9319 0 to 180 Degree Digital Angle Ruler/Protractor

Feature

Ideal for installing crown molding, chair rails, or base molding
Allows user to cut inside or outside corner angles
Digital screen displays angle measurements from 0 degrees to 180 degrees
Set the miter or bevel angle on virtually any tool
CR2032 3-volt lithium battery is included

Description

No more guessing the inside or outside corner angles on walls when installing crown, chair rail or base moldings. This gauge will allow you to cut mitered joints correctly the first time. Use to set the miter or bevel angle on virtually any tool. The digital screen displays angle measurements from 0 degrees to 180 degrees accurately to within 0.3 degrees. A convenient hold bottom locks the reading on the display.

15. General Tools 836 ANGLE-IZER Template Tool

Feature

THE ULTIMATE TEMPLATE TOOL: Perfect for builders, craftsmen, weekend warriors and DIY-ers alike, it's an essential tool for any toolbox! Save time, money and effort, the ANGLE-IZER will eliminate tedious, repetitive measures and materials made from inaccurate cuts. It's the most versatile tool you can own!
MAKE PERFECT ANGLED CUTS EVERYTIME: The ANGLE-IZER's four-sided ruler mechanism slides and locks into any desired angle as a reusable stencil for endless applications. No need to create a new template for each new job or remeasure the same angles over and over again- the ANGLE-IZER saves you both time and effort!
GREAT FOR REPETITIVE SPACING AND GAUGING: Set at 90-degree angles to space parallel pieces of wood, form into a T-Square to align your brick, or even set your own distances for corbelling - the ANGLE-IZER will help you get the job done right! Plus, with a 10mm thickness, use it as a gauge/spacer for standard brick joints!
FOR ANY MATERIAL AND APPLICATION: Create layouts in tile, brick, stone, lumber, laminate and more! The ANGLE-IZERTM is handy for creating bull eyes, arches, plumb cuts and any project you can think of. Try using the ANGLE-IZER to retile your bathroom floor, create a stone archway, or transform your backyard with a custom brick patio!
DURABLE AND ERGONOMIC: Fiberglass filled nylon makes the ANGLE-IZER durable for any job and industry. The ANGLE-IZER folds for easy storage and utilizes a unique tightening mechanism for one-handed operation. Portable and lightweight, take the ANGLE-IZER on the go to any job site!

Description

The ANGLE-IZER is The Original Template Tool from General Tools. Save yourself time and effort by using the ANGLE-IZER from General Tools! Perfect for both professionals and DIY-ers alike, this template tool utilizes four adjustable double-sided rulers to create a custom stencil for each job. Each arm is dual calibrated in inches and centimeters, and laser engraved to withstand even the harshest job site. Whether creating plumb cuts on roof joists or retiling your bathroom floor, the ANGLE-IZER will help in any job: Its the most versatile tool you could own! GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, were proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

16. GemRed Digital Level Angle Slope (NO.82112 Level without Magnetic Base(RED))

Feature

Accuracy 0.2 degree. Resolution 0.1 degree. Measuring range:0 degree~360 degree. Working temperature: -10 ~+50
Hold function to freeze measurements
Conversion between absolute measurement and relative measurement and inclination measurement.
Automatic shut off after 6 minutes
Large display with backlight

Description

GemRed 82112 digital level

Mechanical specifications
Color: RED
length:400mm
magnet: no
Protection grade: IP50
The length of work area: (total length-16)
Electrical feature: EMC2 level
Sensitivity: 30 +-10 Points.
Angle error: 2mm/m
Maximum permissible error of zero: +-1.1mm
Stabilization time of bubble: less than 8s.
Technical data: Resolution: 0.1??
Accuracy: 0.2??
Measuring Range: 4*90(0~360)
Weight(Incl. battery): Approx 330g
Work temperature: + 5 degree~+50 degree
Work humidity: < =85%RH
Power: 2 *LR03(AAA) battery(Included)
Battery life: Approx 100 hours
Packaging Details:
Paper box packing, 1 product +paper box +2 batteries +manual.

Conclusion

All above are our suggestions for angle tool digital. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using angle tool digital with us by comment in this post. Thank you!