If you looking for hydro generator 12v then you are right place. We are searching for the best hydro generator 12v on the market and analyze these products to provide you the best choice.
Reviews
1. SAVEMORE4U18 10W Water Turbine Generator Micro Hydroelectric DIY LED Power DC 12V Water Flow Generator Micro-Hydro Water Charging Tool (Yellow)
Feature
Can be directly to the small battery chargeCan charge mobile phone
Can give 12V radio power, charging, power supply for LED lights, etc
Appearance: generator surface cleaning,no corrosion, the structure is strong
Axial gap 0.2 - 1.0mm,the mechanical noise :55dB,generator single volume: 90g,the life of generator: 3000h
Description
There are two types of lithium batteries on the market , with a charge management chip, a chip without charge management , lithium battery needs charging management chip electrical impulse , or prone to explosion.- The output voltage :12V
- between the wire resistance 10.5 0.5
- Insulation resistance 10M (DC100 megger )
- the maximum pressure 0.6Mpa outlet closed
- the outlet opening maximum pressure 1.2Mpa
- Start pressure 0.05Mpa
2. Yosoo 12V DC Generator 10W Small Hydroelectric Power Generator
Feature
Between the wire resistance 10.5 0.5The output voltage :12V
The maximum pressure 0.6Mpa outlet closed
Insulation resistance 10M (DC100 megger )
The outlet opening maximum pressure 1.2Mpa
Description
Appearance: generator surface clean , no rust, no scratches when significant , solid structure .
Axial clearance 0.2-1.0mm
Mechanical noise 55dB
The amount of the Generator : 90g around
Generator life : 3000h
Package Include:
1 x DC 12V DC generator 10W micro-hydro water turbine generator water F LED lights
3. Yosoo 8.8-15V DC Hydroelectric power Micro-hydro generator Portable water charger
Feature
Unique hydropower separation technology, the unique dual clutch, magnetic circuit coupling volume is only about 4/5 of the normal micro hydroelectric generator, the output power to ordinary hydroelectric generator 2-3 times.High efficiency, long life of waterway design and low flow loss, low water pressure (0.5 KG), load short circuiting, also can start smoothly.
1.Water inlet/outlet: 1/2" 2.Output Voltage: DC9.8~18.5V/no-load, 3.DC8.8 ~ 15V/0.1K load Max power : 3.5W 4.Output Current: 128 to 260 MA/0.1 K load 5.Water Pressure: 0.08 ~ 0.45MP
6.Maximum Water Pressure: 0.55MP 7.Maximum Pressure: 1.6MP 8.Traffic Loss: 3.6% (at 0.25MP)
Package included: 1 * Hydroelectric power Micro-hydro generator
Description
Specialty:
1.Unique hydropower separation technology,
the unique dual clutch, magnetic circuit coupling volume is only about 4/5 of the normal micro hydroelectric generator, the output power to ordinary hydroelectric generator 2-3 times.
2.High efficiency, long life of waterway design and low flow loss, low water pressure (0.5 KG), load short circuiting, also can start smoothly.
Description:
1.Water inlet/outlet: 1/2"
2.Output Voltage: DC9.8~18.5V/no-load,
3.DC8.8 ~ 15V/0.1K load Max power : 3.5W
4.Output Current: 128 to 260 MA/0.1 K load
5.Water Pressure: 0.08 ~ 0.45MP
6.Maximum Water Pressure: 0.55MP
7.Maximum Pressure: 1.6MP
8.Traffic Loss: 3.6% (at 0.25MP)
9.Working Temperature Range: 5C ~ 85C
10.Dimensions: 85.4 42.5 81.4mm
11.Detection Output: open
Package included:
1 * Hydroelectric power Micro-hydro generator
4. R. B. Manufacturing 302484 PowerWheel Hydroelectrical Teaching Bundle
Feature
Model turbine demonstrates how water converts mechanical energy to electrical energy and teaches concepts of renewable energy and hydropower to students in grades K through 12Polycarbonate parts for durability and crack resistance
Generates 12VAC power
Includes turbine wheel and generator, hose, LED light strip, test leads, and bridge rectifier
Description
The R.B. Manufacturing PowerWheel Hydroelectrical Teaching Bundle is a polycarbonate model turbine that generates 12VAC power when connected to a water faucet. This model turbine demonstrates how water converts mechanical energy to electrical energy and teaches concepts of renewable energy and hydropower to students in grades K through 12. It is made of polycarbonate for durability and crack resistance. Polycarbonate resists grease, oil, detergent, and most inorganic acids, and has a very high impact resistance at nearly 30 times that of safety glass. The set includes a turbine wheel and generator, hose, LED light strip, test leads, bridge rectifier, and instructions.
Science education products incorporate applied math and science principles into classroom and homeschool-based projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.
R.B. Manufacturing manufactures model turbines for demonstrating hydropower and renewable energy in schools. The company, founded in 2010, is headquartered in Bellingham, WA.What's in the Box?
- Turbine wheel and generator
- Hose
- LED light strip
- Pair of test leads
- Bridge rectifier
- Instructions
5. Rarido 3Pcs 3V-24V 12V Mini 3-Phase Generator Wind Turbines Hand Motor
Feature
Package Includes: 3 x Micro generatorDescription
Specifications:Rotor: D28.5mm x 10mm
Fixing plate: 30mm x 30mm
Shaft size: D3mm x H31.5mm
Voltage: 3-24V
Current: 0.1A-1A
Rated speed: 300-6000 turn
Rated power: 0.5-12W
Instructions:
You can connect any two LEDs lamp beads
Suitable for micro wind micro-hydro power generating system hand friction
Three-phase AC power
Package includes:
3 x Micro generator
6. Yosoo DC Water Turbine Generator Water 12V DC 10W Micro-Hydro Water Charging Tool
Feature
The output voltage :12V; The outlet opening maximum pressure 1.2MpaMechanical noise 55dB; Generator life : 3000h
Can give the 12V radio power, charging, power supply to the 10W LED lights, the maximum charge current 220mA.
The output voltage with no voltage regulator is proportional to the water pressure.
Appearance: generator surface clean, no rust, no scratches when significant, solid structure.
Description
Features:
Micro hydro generator, the potential energy conversion of the water into electrical energy mechanical equipment.
DC 12V voltage regulator output, you can give the 12V radio power, charging, power supply for LED lights, etc
Technical conditions:
- The output voltage :12V
- The maximum output : 220mA (12V)
- between the wire resistance 10.5 0.5
- Insulation resistance 10M (DC100 megger)
- the maximum pressure 0.6Mpa outlet closed
- the outlet opening maximum pressure 1.2Mpa
- Start pressure 0.05Mpa
The mechanical properties and the operating environment:
- Appearance: generator surface clean , no rust, no scratches when significant , solid structure .
- axial clearance 0.2-1.0mm
- mechanical noise 55dB
- the amount of the Generator : 90g around
- generator life : 3000h
- Output characteristics: the output voltage with no voltage regulator is proportional to the water pressure.
Package Include:
1 x DC 12V DC generator 10W micro-hydro water turbine generator water F LED lights
7. Bettal DC 12V Generator 10W Micro-hydro Water Turbine Hydroelectric Charging Power
Feature
Self powered by water pressure.Transforming the stream of water into power.
Ideal for kitchen or bathroom to make it fantastic.
ABS chroming material, excellent corrosion resistance, durable.
The output power can charge several devices like mobile phone, battery, radio, etc.
Description
Material: Plastic
Color: Black
Features:
1. Energy conservation and environmental protection
2. Transforming the stream of water into power
3. Self powered by water pressure
4. ABS chroming material, excellent corrosion resistance, durable
5. Ideal for kitchen or bathroom to make it fantastic
6. The output power can charge several devices like mobile phone, battery, radio, etc
Hydro Generator
Output voltage: 12V (Output Voltage is proportional to water pressure)
Max Current Output: 220mA
Insulation Resistance between conductors: 10.50.5
Insulation Resistance 10M
Maximum pressure: 0.6Mpa
Outlet opening maximum pressure: 1.2Mpa
Hydraulic Boot Pressure: 0.05Mpa
Mechanical properties:
Solid structure.
Axial clearance: 0.2-1.0mm
mechanical noise 55dB
Generator life: 3000h
10w Water Turbine Generator can charge several devices
Small Hydroelectric Power Generator with ABS chroming material
Water Charger with stable voltage output
This Turbine Generator Can charge lithium Batteries
DC 12V stable voltage output, which can charge 12V radio, LED light or other devices
Inner Diameter: 13mm
External Diameter: 20mm
Dimensions: 8.6*4.9*3.2cm
Package Contents:
1 x Generator
8. Tinsay DC Water Turbine Generator Water 12V DC 10W Micro-Hydro Water Turbine Hydroelectric Charging Power 12V Generator
Feature
There are two types of lithium batteries on the market , with a charge management chip , a chip without charge management , lithium battery needs charging management chip electrical impulse , or prone to explosion.Appearance: generator surface clean , no rust, no scratches when significant , solid structure .
Description
Specification
the technical conditions: - The output voltage :12V
- between the wire resistance 10.5 0.5
- Insulation resistance 10M (DC100 megger)
- the maximum pressure 0.6Mpa outlet closed
- the outlet opening maximum pressure 1.2Mpa
Start pressure 0.05Mpa the mechanical properties and the operating environment:
- Appearance: generator surface clean , no rust, no scratches when significant , solid structure .
- axial clearance 0.2-1.0mm
- mechanical noise 55dB
- the amount of the Generator : 90g around
- generator life : 3000h
Package includes:
1 x DC 12V DC generator 10W micro-hydro water turbine generator water F LED lights
9. SODIAL(R) NEW Water Turbine Generator Micro-Hydroelectric Power DC 12V
Feature
Micro-Hydro generator, the potential energy conversion of the water into electrical energy mechanical equipmentCan be directly to the small battery charge,Can charge mobile phone radio power, charging, power supply for LED lights, etc
Colour:Black
Material: plastic shell
F50-12V:DC 12V voltage regulator output, you can give the 12V radio power, charging, power supply to the LED
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) NEW Water Turbine Generator Micro-Hydroelectric Power DC 12V
Technical condition:
The maximum output : greater than equal 220mA (12V)
Line resistance :10.5 + 0.5
Insulation resistance: 10M (DC100)
The outlet closed the maximum voltage: 0.6Mpa
The water outlet open the maximum voltage : 1.2Mpa
Start water pressure :0.05Mpa
Size:8.8x5.8x3.9cm(L X W X H)
Appearance: generator surface cleaning,no corrosion, the structure is strong
Axial gap 0.2 - 1.0mm
The mechanical noise : less than equal 55dB
Generator single volume: 90g
The life of generator: greater than equal 3000h
Output characteristics: the output voltage with
no voltage regulator is proportional to the water pressure
Note: according to the direction of the arrow, the standard of 1/2" water pipe
Package include: 1 x Micro-Hydro Generator
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
10. 300 Watt Bicycle Generator 3/8" Belt Drive Pedal Power Pulley Dynamo MNS Power
Feature
MNS Power 300 Watt Air Cooled DC Generator 0 to 40V OutputOutput Voltage: 0 to 40 Volts DC
Nominal Current 15 Amps, Peak Current 20 Amps
Max RPM 2600
Mounting Holes: 6mm
Description
This DC Generator can be driven by human power, wind power, or hydro. The 3/8" wide pulley has a 2 inch outer diameter. You will be able to mount this generator to a bike stand using an adapter mounting plate.You can save more than 50% by making your own. Do an Amzaon search for "MY1016" scooter motor and a search for 2" V-belt pulley 5/16" bore. Or you can do a search for amazon product code "B00T6CKSGY"
It may be a big surprise, yes any DC permanent magnet motor also works as a DC generator. The MY1016 scooter is very robust engineered to operate in harsh conditions. It has ball bearings on its shaft as opposed to brass bushing bearings which are found in most cheap motors.
To make your own, the basic steps are: (1) Remove the nut and gear off of the MY1016 scooter motor (2) Measure the shaft of your scooter motor (Usually 8mm). (3) Drill out the 5/16 inch inner bore pulley to meet the size requirement mentioned above (4) Grind a flat spot on the shaft of your scooter motor / generator where the set screw from the pulley can rest. (5) If you are really ambitious, you can take the MY1016 permanent magnet motor apart and drill holes in the sides to allow cool air error to enter so it doesn't get too hot while running at 15 Amps output or more. It is very difficult to put it back together because the brushes that touch the armature are spring loaded and get in the way.
NOTE: The generator shown in this listing has already been modified with these ventilation holes for you.