When you want to find 6004 2rs, you may need to consider between many choices. Finding the best 6004 2rs is not an easy task. In this post, we create a very short list about top 9 the best 6004 2rs for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 6004 2rs:
Reviews
1. XiKe 10 Pack 6004-2RS Bearings 20x42x12mm, Stable Performance and Cost-Effective, Double Seal and Pre-Lubricated, Deep Groove Ball Bearings.
Feature
LOCATION - Standard Bearings, Cost-Effective the Best and Stable Performance.QUALITY - 100% Dimensional Tolerance Detection to Ensure Optimum Suitability.
SEAL - Double Seal Effectively Saves Grease and Prevent Impurities From Entering.
IMPROVE - Internal Clearance Slightly Larger, Compensate for Thermal Expansion.
PROFESSIONAL - For Bearings We Are a Professional Level, Beginning in 1945.
Description
XiKe Bearings USA is the only shop with united states XiKe brand license. We sales high-quality Bearings, Pillow block, Repair kits, Steel balls and other related parts, can provide professional selection guidance, technical information and maintenance knowledge and so on.Specifications Model: 6004-2RS
Main dimensions: 20 ID x 42 OD x 12 Width / mm
Number of packages: 10 Pcs
External design: Double seal (Internal steel sheet covered with rubber)
Grease filled: Standard fill - Temperature range -20 ~ 120 Degrees Celsius.
Manufacturing standards: American Bearing Manufacturers Association, Precision ABEC-1.
Use ball grade: G25
Single weight: 0.07 / Kg
Bearing materials: AISI 52100 Chromium steel
Cage material: Stamped steel
Type: Bearing - Ball bearings - Deep groove ball bearings - Single row - Double seal.
Selection Guide:
2RS Double seal - For occasions where the external environment is poor and the temperature is moderate (-20 ~ 90 Degrees Celsius).
ZZ Dust cover - For the external environment is good, high temperature occasions (-20 ~ 110 Degrees Celsius).
Open - Usually used for mechanical internal, adequate oil occasions. (You can use 2RS bearings to clean the internal grease, the equivalent of open bearings)
Deep groove ball bearings have deep, uninterrupted raceway grooves. these raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Deep groove ball bearings are available open or capped (with seals or Shield).
2. 10 Snowmobile Bearing 6004-2RS 20x42x12 Sealed Ball Bearings
Feature
Deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
Lubricated at manufacturer for no additional lubrication required
Description
This 6004-2RS 20x42x12-millimeter sealed snowmobile bearing has deep groove geometry for high speeds and supporting both radial and axial loads. The bearing is made of chrome steel for durability and resistance to deformity under heavy loads, and it has rubber seals on both sides of the bearing to keep lubricant in and contaminants out. It comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove shielded ball bearing is for use in snowmobiles.
What's in the Box
- 10 6004-2RS 20x42x12-millimeter snowmobile bearings
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
3. 10 Bearing 6004-2RS 20x42x12 Sealed Ball Bearings
Feature
Deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
Lubricated at manufacturer for no additional lubrication required
Description
This 6004-2RS 20x42x12-millimeter sealed ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. Its chrome steel construction makes it durable and resistant to deformity under heavy loads. The rubber seals on both sides of the bearing keep lubricant in and contaminants out, and it comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove sealed ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
What's in the Box
- 10 6004-2RS 20x42x12-millimeter ball bearings
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
4. 6004-2RS SKF Brand rubber seals bearing 6004-rs ball bearings 6004 rs
Feature
6004-2RS SKF Brand rubber seals bearing 6004-rs ball bearings 6004 rsRadial (Deep Groove) bearing
SKF bearing
Material: Chrome Steel (Gcr15)
JSB Great Bearings
Description
***Dimension D (Outside) 42 mm d (Inside) Bore 20 mm B (Width) 12 mm ***Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C) SKF Brand Bearings JSB Great Bearings5. 6004 Nachi Bearing Open C3 Japan 20x42x12 Ball Bearings
Feature
Single-row deep groove geometry for high speeds and supporting both radial and axial loadsChrome steel for durability and resistance to deformity under heavy loads
C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion
Open bearing for lubrication applied in place
Static load rating of 5,000 newtons and dynamic load rating of 9,400 newtons
Description
This Nachi 6004 ball bearing is made of chrome steel, is unsealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 42 mm outside diameter, and a 12 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads. It has C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is open for lubrication in place. The static load rating is 5,000 newtons and the dynamic load rating is 9,400 newtons. A steel cage spaces the balls for even load distribution and prevents contact to reduce friction, vibration, and noise. The maximum speed with grease lubrication is 18,000 revolutions per minute (rpm). This deep groove ball bearing is suitable for use in applications such as transmissions, motors, and pumps.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
6. ORS 6004 ZZ C3 Deep Groove Ball Bearing, Single Row, Double Shielded, Steel Cage, C3 Clearance, ABEC 1 Precision, 20mm Bore, 42mm OD, 12mm Width
Feature
Deep-groove geometry supports both radial and axial loads, and high speed ratingsC3 radial clearance for radial slack between the inner and outer rings that is greater than C0 (normal) clearance to compensate for thermal expansion
ABEC 1 (P0) precision for performance within a narrow range of variation
Pressed steel cage for evenly spacing rolling elements for minimal friction, vibration, and noise All ORS products 100% noise-tested
Through-hardened chromium steel (AISI 52100) for durability, heat tolerance, and resistance to deformity under heavy loads
Description
ORS 6000 Single Row Deep Groove Ball Bearing Series support both radial and axial loads in a wide range of applications. These bearings are made with very high levels of precision (Annular Bearing Engineering Committee - ABEC 1 precision) and used in applications where rotational performance, low torque, and higher load ratings are necessary. Such applications include electric motors, clutches, drives, gearboxes, bicycles, compressors, fans, pumps, conveyors, turbines, appliances, industrial machine tooling, food processing, printing and textile machines, and many more.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
ORS Bearings Inc. manufactures single and double row ball bearings, angular contact ball bearings, tapered and cylindrical roller bearings, various bushings, rings, rollers, and other bearing components. The company was founded in 1982 with the license of STEYR Waelzlager of Austria, and headquartered in Ankara, Turkey. North America sales office is located in Atlanta, GA.
7. 6004-2RS C3 Fit Premium Radial Ball Bearing, 20x42x12 (mm) (10 Pieces)
Feature
Pre-greased, no maintenance neededBrand New
Free Shipping within the Continental United States
Same business day order processing before 12:30PM PDT
Satisfaction Guaranteed
Description
6004-2RS C3 Fit Premium Radial Ball Bearing, 20x42x12 (mm) (10 Pieces)-Pre-greased, no maintenance needed
-Brand New
-Free Shipping within the Continental United States
-Same business day order processing before 12:30PM PDT
-Satisfaction Guaranteed
ABEC Rating: C3
Static Load Rating: 5 kN/1150 lbs
Dynamic Load Rating: 9.4 kN/2100 lbs
Width/Height/Thickness: 12mm
ID: 20mm
OD: 42mm
Material: Chrome Steel
Max RPM: 18000
Quantity Per Order: 10 Pieces
Style: Rubber Sealed on Both Sides
Product Description: This sealed ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. It is made of chrome steel material which makes it durable and resistant to deformity under heavy loads. This bearing is brand new and pre-lubricated/greased from the manufacturer so no additional lubrication is required. The rubber seals on both sides of the bearing keep lubricant in and contaminants out. This deep-groove sealed ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. It is used in a wide range of applications such as agricultural machinery, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers and many other industries.
8. 6004-2RS Sealed Bearing - 20x42x12 - Lubricated - Chrome Steel (10 PCS)
Feature
Dimensions: 20x42x12 mmRubber seal on both sides
100% Chrome Steel for higher resistance and durability
Supports 21,000 rpm
Our high-quality bearing is made to reduce your replacement frequency and maintenance cost
Description
Model: 6004 2RSQuantity per Package: 10 Pcs
Material: 100% Chrome Steel
Protection: Rubber Seal on both sides
Greased / Lubricated: Yes
Bore (Inner) Diameter: 20 mm
Outer Diameter: 42 mm
Width (Thickness): 12 mm
Supported Revolutions per Minute (RPM): 21,000
PGN's 6004RS (20x42x12) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.
9. 6004-2RS C3 Fit Premium Radial Ball Bearing, 20x42x12 (mm) (4 Pieces)
Feature
Pre-greased, no maintenance neededBrand New
Free Shipping within the Continental United States
Same business day order processing before 12:30PM PDT
Satisfaction Guaranteed
Description
6004-2RS C3 Fit Premium Radial Ball Bearing, 20x42x12 (mm) (4 Pieces)-Pre-greased, no maintenance needed
-Brand New
-Free Shipping within the Continental United States
-Same business day order processing before 12:30PM PDT
-Satisfaction Guaranteed
ABEC Rating: C3
Static Load Rating: 5 kN/1150 lbs
Dynamic Load Rating: 9.4 kN/2100 lbs
Width/Height/Thickness: 12mm
ID: 20mm
OD: 42mm
Material: Chrome Steel
Max RPM: 18000
Quantity Per Order: 4 Pieces
Style: Rubber Sealed on Both Sides
Product Description: This sealed ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. It is made of chrome steel material which makes it durable and resistant to deformity under heavy loads. This bearing is brand new and pre-lubricated/greased from the manufacturer so no additional lubrication is required. The rubber seals on both sides of the bearing keep lubricant in and contaminants out. This deep-groove sealed ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. It is used in a wide range of applications such as agricultural machinery, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers and many other industries.