Buying Gf Decal, Drop Party!, Free Armor Trimming, Please Message Us For More Colors And Sizes (H 2.5 By L 9 Inches, Yellow)

Related posts

Feature

Please refer to the Product Description for INSTALLATION INSTRUCTIONS
This decal has a life expectancy of up to six years
Please message us for more colors and sizes

Description

These Materials are needed to install your Buying gf decal on almost any clean and flat surface, such as a windshield, laptop, wall, or other smooth surface with simple curves : Water, Paper Towel/Rag, Credit Card/Drivers License, Scotch tape, and Scissors. Before installing your decal, remove any air bubbles that may have formed from temperature changes during shipping by taking your decal into a cooled environment, then use a credit/debit card to smooth out your decal until most, or all of the air bubbles disappear. Then, clean your desired surface with WATER ONLY. (Do Not Use soap or other cleaners. The adhesive from your decal may have a hard time sticking to them.) After cleaning your surface, tape a piece of scotch tape vertically in the middle of your decal. Then, stick your decal to your clean surface. (You may use a tape measurer to straighten the position of your decal.) Now that your decal is in position, starting from the left or right side of your decal, peel your clear transfer tape away from the backing. (Peel slowly to make sure that your decal image sticks to your clear transfer tape.) Do not peel past the scotch tape holding your decal in place. Instead, cut the backing out of the way with scissors, and then apply that side of your decal to your surface with the help of a credit card to press it firmly to your surface. After that, remove the scotch tape from the middle of your decal; peel the clear transfer tape away from the backing on the other side of your decal. Then, after removing the scrap of backing, apply your decal to your surface. Please wait 3 to 5 minutes for your decal to adhere. Then, slowly peel off the clear transfer tape until the only thing sticking to your surface is your decal image. (If your decal image starts coming off as you peel away your clear transfer tape, stop peeling and squeegee your decal with a credit card. Repeat this process until your decal sticks.)