Related posts

Feature

Compatible with SmartThings STH-ETH-200 or older, Orvibo, and Harmony with ZigBee Extender hubs only. ZigBee switch enables remote control of appliances, such as lights, fans, motors, and more from anywhere using an internet connected device
Works as part of a home automation system for smart lighting control, smart home control, and association scene control
Acts as a signal repeater to boost ZigBee network after network inclusion
Wireless ZigBee technology uses mesh networking to expand network reach and eliminate points of failure; built on 2.4GHz for worldwide use; uses a variety of security mechanisms such as AES-128 encryption, device and network keys, and frame counters
Single-pole; Interchangeable face covers (white comes attached, black, light almond); ZigBee frequency: 2.4GHz, HA 1.2 Certified; 120VAC; 1000W Incandescent, 25W Minimum Load; FCC compliant. Device type code is required to work with SmartThings

Description

The ZB15S ZigBee Smart Switch allows you to remotely control lights, fans, motors, and more from anywhere using an internet-connected device. Easily upgrade your smart lighting control system by adding the ZB15S ZigBee light switch to your ZigBee network. The ZB15S replaces standard wall switches to allow manual and remote control through your ZigBee network. Not only can you remotely control the ZigBee switch, you can create associations or group it with other ZigBee devices as part of a scene for simultaneous control. It is compatible with all types of lighting, including LED, CFL, incandescent and halogen lights. Enerwave ZigBee dimmer, switch, receptacle, plug-in module and scene control products make your home "smart" with enhanced security and energy efficiency. In a ZigBee network, each device is designed to act as a wireless repeater. This ensures that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Repeaters will retransmit the signal from one device to another until the intended device is reached. Neutral wire is required for installation. Single-pole use only.

Compatible hubs: SmartThings STH-ETH-200 or older, Orvibo, and Harmony with ZigBee Extender hubs. Device type code is required to work with SmartThings.