Related posts

Feature

ENHANCED THROW - Upgraded for 2017, the P10GT (Grand Throw) uses a Cree XP-L HI V3 LED to throw up to 900 lumens an impressive 312 yards - 100 lumens and over 100 yards more than the P10.
DIRECT ACCESS TO STROBE - Tactical, military and law enforcement users will enjoy the dual-switch tailcap which allows for easy single-handed operation. The main button turns the flashlight on/off while the secondary saddle switch can be used for direct access to strobe and output adjustment.
SLIM DESIGN FOR MOUNTING - The P10GT has a standard 1" body tube and weighs under 3 ounces (without battery) making it suitable for weapon mounting..
MULTI MODE SETTINGS - Customize your P10GT further with three defined user modes: Tactical Mode, Law Enforcement Mode and General mode. Each offers different brightness settings (up to 4 in General mode) to create task-specific outputs.
COMPLETE TACTICAL & MOUNTING KIT - Nitecore P10GT Tactical Flashlight, Padded Tactical Carrying Case, Premium Holster, Removable Steel Belt/Pocket Clip, Nitecore Lanyard, Tactical "Cigar" Ring, CR123 Battery Magazine, Replacement Rubber Switch Cap, 2x Spare O-rings, lumen Tactical Picatinny offset rail mount, Nitecore RSW2 Remote pressure switch, Hex-key Allen wrench, & 2x CR123A Batteries

Description

Nitecore P10GT Set is a Rail-Mountable Weapon light featuring a recoil-proof LED that creates a high-intensity 900 lumen beam with significant reach and peripheral illumination, making it ideal for close- to medium-range applications.

The P10GT can be fitted with either of two different switches, both included. The first is a regular dual-button tail cap switch with "strobe ready" function. The second is a tape switch with a 10-inch coiled cable that provides fingertip control with momentary-on to both steady and strobe outputs.

The set comes with a compact offset mount that can be installed securely on any MIL-STD-1913 Picatinny rail.

Specification
* General Mode: Turbo, Medium, Low, Strobe (900/300/60/900 lumens)
* Beam distance: 312 yards (286 meters)
* Beam intensity: 20,500 cd
* Battery: 2xCR123A or 1x 18650
* Length: 5.28" (134mm)
* Diameter: 1"(25.4mm)
* Weight: 2.89oz (82grams) (without battery)
* Waterproof and Impact resistant

Operating the light with Regular Cap Switch
* Press power button to turn the light on and off.
* Press and hold mode button to instantly access the strobe function
* Tap mode button to select the output level. Selected output level is memorized even after light is turned off.

Operating the light with Remote Pressure Switch
* Press the side button on the cap for stay-on output (programmable)
* Press the lower large pad button for momentary-on Pre-set Output (High, Medium or Low)
* Press the upper pad button for momentary-on strobe