Related posts

Feature

Carrier/Backing: polyethylene film. Adhesive: synthetic rubber.
Service/Operating Temperature: 32F to 160F
Thickness: 7 mils (carrier, adhesive)
Adhesion: 80 ounces per inch (to stainless steel test panel). Tensile Strength: 19 pounds per inch (longitudinal).
Elongation: 76%

Description

Shurtape PE-444 Stucco Masking Film Tape is a UV resistant polyethylene film tape used to temporarily mask surfaces during stucco application and painting. It has a special synthetic high-tack adhesive which provides a watertight seal in severe environments and weather conditions and offers clean removal. Typical applications for Shurtape PE 444 include masking window and door frames during stucco application as well as masking wood, metal, vinyl, and tile during painting. Also used for greenhouse repair (the tape provides for limited UV exposure).

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m.

Technical Information

Core: 3 inch diameter
Backing/Carrier: polyethylene film
Adhesive: synthetic rubber
Thickness: 7 mils (carrier, adhesive)
Adhesion: 80 ounces per inch (to stainless steel test panel)
Tensile Strength: 19 pounds per inch (longitudinal)
Service/Operating Temperature: 32F to 160F
Elongation: 76 %
Water Vapor Transmission Rate: 0.4 gm/100 sq in/24 hr