Tower Pro Micro Servo 9G SG90 5 Volt DC 220-650 mA

Related posts

Feature

This tiny servo motor can swing approx 90 degrees in either direction via any of the (3) included servo horns with screws on the 3/16" toothed shaft:
13/16" long single horn, a 1-5/8" long double horn or the 1-5/8" long double horn with (2) smaller cross horns.
Draws between 220 and 650mA at 5VDC, and is rated for 25 oz/in of torque.
Measures 7/8" x 1/2" x 1-1/16" deep with a pair of mounting wings with 1/16" bores.
Wiring by the 25cm with connector is 5V to red, ground to brown and timing pulses to orange. Use any 1-2ms pulses at 50Hz.

Description

HOW ABOUT A LITTLE SERVICE? This tiny servo motor can swing approx 90 degrees in either direction via any of the (3) included servo horns with screws on the 3/16" toothed shaft: a 13/16" long single horn, a 1-5/8" long double horn or the 1-5/8" long double horn with (2) smaller cross horns. Draws between 220 and 650mA at 5VDC, and is rated for 25 oz/in of torque. Measures 7/8" x 1/2" x 1-1/16" deep with a pair of mounting wings with 1/16" bores. Wiring by the 25cm with connector is 5V to red, ground to brown and timing pulses to orange. Use any 1-2ms pulses at 50Hz.