Related posts

Feature

PIR motion light sensor:This device can detect motion from a heat-emitting source (such a person) within its field-of-views and automatically turns lights ON and OFF.
Two mode adjustable:The occupancy sensor switch can also be "ON" mode, in which you light turn on always. A sensor automatically shuts the lights off when the room is vacant in "Auto" mode.Auto mode is great for hallway,stairs,or bathroom.
Saving energy & money:Motion sensor switch can identify when daylight is in the room.The switch only turns the lights on when they're needed.Saving your money.
Neutral wire required:Three wires (Black, Green, and Red,). Black wire goes to Hot; Green wire goes to Natural; Red wire goes to the hot end of your light (the load). Then the other end of the light and the green wire of the switch go to the Natural.
Time Delay:Adjustable Time-Delay for customizing: Min: 10sec3sec ; Max:7min2min (The load will stay on for the time you set, then go out).Adjustable Sensitivity; Light Level Sensing; 180 Field View. The wall switch is suitable for indoor use only,Easy to install. If there are some questions about installation, please check the wiring diagram or contact us.

Description

As there is a photosensitive internal, switch only allows the light switch to be activated on in dark condition.
So when you test the switch on auto function in a very bright environment (Ambient Light: > 5-10LUX) , It wont work ( Even movement sensed).
In this condition, Please do Cover the detection area with your hand for about 30 seconds then test again.


Specification

Input Voltage :110V/AC-240V/AC
Power Frequency :50/60Hz
Detection Range :180 degree
Detection Distance :9m max(less than 24C)
Ambient Light:Work in LUX less than 20LUX (switch on the "Auto" position)
Time-Delay Min :10sec(more or less) Max.:30min
Working temperature :20~40C
Working Humidity : higher than 93%RH

Rated Load :
1200W/220v (incandescent lamp)
300W/220V (energy-saving lamp)
800W/110V (incandescent lamp)
800W/110V (incandescent lamp)

Power Consumption :
0.45W(work)
0.1W (static)

Detection Motion Speed :0.6~1.5m/s
Size :70mm*115mm*35mm

Function:

1.The Motion Sensor Switch works in the ambient light less than 20LUX (dark condition).
2.Time -delay is added continually: When it receives the second in induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
3.Switch: "ON" "OFF" "AUTO"

Attention:

1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.

2.Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.

3.Don't fix it in strong shock or vibration environment.