Related posts

Feature

This is 2018 new STM32 V2.1S OLED soldering station controller,we add sunction tin pump function compared with old STM32 V2.1S,on the back of the controller,it has a interface. its display is 1.3 inch.
DIY requirements and risks: DIY technical requirements, the soldering station controller does not provide the circuit diagram and schematic diagram, after purchase contact to obtain the installation wiring diagram, therefore, the proposed rookie, bird please consider, I can only provide welding related guidance, all devices , Once welded, will not be returned, DIY risk Participants to assess their own ability and risk, problems and risks themselves.
This controller can be only used with T12 tips.For T12 tips,ordinary solder melting point is 183C, lead-free solder melting point is 227C, usually the welding temperature is 300-380C, 380C is the temperature of the dividing line, higher than 380C, iron head oxidation and loss is extremely fast, seriously affect the heating core life.
STM32 OLED display T12 soldering station simple instructions: 1: the main function of welding station and performance characteristics: temperature range 150 ~ 480C 2:the thermocouple cold junction temperature automatic compensation range -9-99 C (to be more accurate). 3:PID temperature control, temperature stability 10 C (no load). 4:can save 5 groups of temperature. 5:can save the temperature of each head calibration parameters, support all types of T12 head
Main operation:
1, under normal circumstances, 1 second continuous counter-clockwise rotation below 3 cells into the standby (default 200 degrees (150-300 degrees can be configured) state, if the set temperature is below 200 degrees directly into sleep.
1.1 Standby state, 1 second continuous counter-clockwise rotation 3 lattice sleep (soft shutdown), sleep (soft shutdown) state, short press the encoder to enter the working state.
1.2 Standby mode, press the encoder or clockwise rotat

Description

Output Temperature:150c-480c
Input Voltagle:110-240v
Temperature Stability:10C
Output Power:72W(MAX120W)
Model Number:Electric Soldering Iron
Controller:2018 new STM32 2.1S
Display:1.3 oled
HW:2.1S
SW:2.1