INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)

Top 9 best 433mhz remote control 4ch: Which is the best one in 2022?

Feature

Long Range Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 98ft/30m with no obstacle.
4CH for More ControlAdjustable working way, control equipment turn/reverse, on/off. Switch Self-lock, Jog, Inter-lock.
Security ControlLearning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
Easy to UseExtremely easy to setup, learn, relearn and control(please refer to introduction). Stable and reliable performance, high receive sensitivity.
Wide ApplicationWIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, window, entrance, Garage Doors, alarm system, lifting equipment and so on. NOTE: Please email us if you meet any problem, we are always here to help, thanks!

Description

It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.

Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap.
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).

Using Instructions:
1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully.
2. It can learn various chips with the different code wireless remote control.
3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed.

Receiver:
Size: 7.2 x 5.2 x 2.6cm
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40 Degree +80 Degree
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A

Remote control transmitter:
Size: 5.8 x 3.9 x 1.4cm
1. Remote Distance: 328ft/100M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code

Package Included:
2 x Transmitters
1 x Receiver
1 x Manual