Solar Charge Controller 30A, Solar Panel Battery Controller 12V/24V PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Load Timer Setting ON/Off Hours

Related posts

Feature

Solar charge Controller with dual USB ports, USB Output: 5V/2A max. 12V/24V auto; Rated Charge & Discharge Current: 30A; Settable operating modes of loads, fully 4-stage PWM charge management.
Easy to Use: Solar controller comes with a backlight display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc
Mutiple Electric Protection: short-circuit protection,open-circuit protection,reverse protection,over-load protection, more safty for using, suitable for home, industrial, commercial etc.
The solar regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically
Good Heat Dissipation: Dual mosfet Reverse current protection ,low heat production(avoid direct sunlight exposure or damp place)

Description

Tips
This product belongs to Y-Solar brand, there are some unreliable follow sellers who sell counterfeit, please be careful.

Features:
12V/24V auto work
LCD screen display
Two USB output
Easy operation interface
PWM charging mode
short-circuit protection
Battery reverse discharge protection
Battery reverse polarity protection
open-circuit protection
Overload protection

Parameters:

1. Floating charge Voltage(HVD 13.3V-15V)
2. Recovery after under Voltage(LVD 11V-13.5V)
3.Under Voltage protection (RVD 9V-12.3V)
4.Load Mode(24hours,1-23hours,0hour)
5.Battery Option (GEL,LEAD-ACID,FLOODED)

Batt voltage: 12V/24V auto
Charge current: 30A
Discharge current: 30A
Max Solar input: <50V
Equalization: B01 sealed 14.4V
B02 Gel 14.2V
B03 flood 14.6V
Float charge: 13.7V(defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
USB output: 5V/3A
Self-consume: <10mA
Operating temperature: -35~+60 degree C

System Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
NOTE: The reverse order applies when deinstalling! An improper sequence order can damage the controller!

Package:

1.1X 30A Solar Charge Contorller
2.1X English User Manual