Related posts

Feature

Hot Staple Gun Kit Power supply: 1ph 110V; Output voltage: 0.8-1.2V
Hot Staple Gun Kit with three power levels for rapid and precise staking, unique Staple Gun produces a strong durable repair, Repairs all thermoplastic materials
Hot Stapler Plastic Repair System works by heating special designed staples and setting staples into plastic while still leaving plastic flexible enough for correct fit, Just a few hot staples can save hundreds in replacement-part costs
Hot Stapler is a precision-engineered tool that helps you make solid, permanent repairs of breaks, cracks and tears in rigid or flexible plastic parts. Fit for automotive, power sports, hobby and industrial applications
Hot Staple Gun designed for quick repair and reinforcing broken/ripped/damaged/split plastic on autos, motorcycles, ATVs, boats, etc, repairing plastic components such as bumpers, headlight fittings and assemblies, panel clips, tabs, plastic pins, spoilers, etc

Description

Plastic Repair Kit System Hot Stapler Plastic Repair Kit Tools Hot Staple Gun Kit for Plastic Repair Welder Bumper with 600 Staples Storage Box and Snips

Kit contents :
Hot Stapler Plastic Repair kit (control box 3 heat settings and single phase power supply) with a gun
(100pcs)-RS16 0.6mm flat staples
(100pcs)-RS18 0.8mm flat staples
(100pcs)-RS26 0.6 wave staples
(100pcs)-RS28 0.8 wave staples
(100pcs)-RS38 0.8mm corner staples
(100pcs)-RS46 0.6mm outside corner staples
(1pcs)-diagonal cutter
(1pcs)-storage box

Technical parameters :
Power supply: 1ph 110V
Output voltage: 0.8-1.2V
Size: 38 x 21 x 20 cm / 15 x 8.27 x 7.87 inch
Gross weight: 4.2kg / 9.26 lbs

Setting the temperature :
Turn the control dial to the second or third position, unless very low heat levels are desired. These two positions satisfy most stapling applications.

Use :
Lay staple over the desired location and apply gentle pressure. Push the button on the handle, then release once the staple is at the desired depth. Allow to cool slightly. Pull back and the staple will remain in the plastic. Clip off the staple with the supplied diagonal cutter.

Caution :
When clipping off the staple prongs wear eye protection and cup your hand over the staple to prevent the clipped wire from becoming a projectile.