Related posts

Feature

Document: https://github.com/spacehuhn/esp8266_deauther; https://github.com/spacehuhn/esp8266_deauther; Usage: You can use it with the display and buttons: https://github.com/spacehuhn/esp8266_deauther/wiki/Display; You can also connect to "pwned" with the password "deauther" and use the web interface: https://github.com/spacehuhn/esp8266_deauther/wiki/Web; If you lost the password you can reset it: https://github.com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset
Note: 1.Connect the battery in the right way! Otherwise the protection IC (IP5306) will burn and you will have to replace it.2.Battery isn't included, recommedding using a 3350mAh flat 18650 battery.
ESP8266 development board: This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.It comes installed with the latest ESP8266 Deauther software.With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz.You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
Changes: Added RGB LED (WS2812b or Neopixel LED); Navigation buttons replaced by a 3 way momentary slide switch; Fixed battery issue: no more battery activation needed with USB; Board color is now red; Charging current increased from 1.3A to 2A. New improved power management

Description

What is it?
This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software.
With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

Changes:
Added RGB LED (WS2812b or Neopixel LED)
Navigation buttons replaced by a 3 way momentary slide switch
Fixed battery issue: no more battery activation needed with USB
Board color is now red
Charging current increased from 1.3A to 2A.
New improved power management

GPIOs and hardware info:
Display: SH1106 1.3" OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14

Breakout Pins:
A0/ADC0, D0 (GPIO-16), D3 (GPIO-0), D4 (GPIO 2), D8 (GPIO 15), RX (GPIO 3), TX (GPIO 1), 5V, 3.3V, GND

What makes it special:
Only ~100mA power usage
Up to 35h of battery life with a 3500mAh 18650 cell
Up to 2A charging current
Up to 2.8A output current
Included 8dB antenna
Included acrylic case
7 GPIO breakouts and 3.3 and 5V output
4 LEDs to indicate battery status in real time
Power button: Click to turn on, double click to turn off
Protection: short, over charging, over discharging, temperature

Package Including:
1 * ESP8266 development board Deauther WiFi OLED V3.5