Related posts

Feature

Use for Radiolink transmitters AT9, AT9S, AT10 and AT10II.
Smaller size, and only weighs 1g.
It's a good choice for mini micro FPV racing drone, especially for ARRIS X90 90MM Brushless Micro FPV RC Racing Drone Quadcopter ARF. (ASIN Code: B0799CD6PT)
DSSS and FHSS spread spectrum working synchronously, SBUS and PPM signal support.
Control distance: about 600 meters, actually control distance depends on the environment.

Description

Installment of receiver antenna
1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3. The antennas must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius.
4. Keep the antennas away from the motor, ESC, and other noise sources as much as possible.
5. Press and hold the Easy Link (ID SET) one second, now the receiver starts work.
6. After all of the above steps finished, the LED indicator will turn and keep in red.
7. The receiver can be packed by sponge or foam for shocking proof when it is installed to the model.

After all of the above steps finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection.

Technical Parameters
1) Channels: 10 channels
2) Working voltage: 4.8-6V
3) Working current: 38-45mAinput voltage: 5V
4) Size: 15 x 13 MM (0.78 x 0.51 inches)
5) Weight: 1g
6) Detachable antenna
7) 4096 section precision, 0.25us per section, servo anti-shake rudder.
8) Control distance: about 600 meters, actually control distance depends on the environment.

Package Included:
Radiolink R6DSM Receiver x 1