Related posts

Feature

Pump out the oil from the top of the car and clean up the dirty things that are low in the shell.
Maximum pressure: 1Mpa.
Maximum flow: 4L/min.
Material: Alloy + plastic.
Here is 24-hour service, any problem, please feel free to contact us.

Description

45W 12V Electric Methanol Oil Diesel Fuel Pump Hydraulic Engine Oil Extractor Transfer Pump
Features:
Pump out the oil from the top of the car and clean up the dirty things that are low in the shell.
Oil, hydraulic oil and cooking oil can also be pumped.
When the corrosive gasoline and diesel oil is exhausted, it is necessary to clean the residual oil immediately, so as not to affect the service life.

Specifications:
Pump voltage: 12V (9-14.4V)
Power: 45W
Maximum pressure: 1Mpa
Maximum flow: 4L/min
Material: Alloy + plastic
Size:
Water pump line length: 56cm/22.05"
Hose: 1.5 m/4.92 ft
Diameter: 12mm/0.47"
Thickness: 2mm/0.08"
Hard tube: 1.1 m/3.6 ft(2pcs)

Be careful:
1.Start the car first, run the engine and start pumping when the engine temperature is around 50 degrees.
2. Turn on the power supply, turn the pump over to see if the import and export are installed.
3. If the pipe is inserted in the end, the oil can be cleaned. If it can not be pumped out or interrupted, the pipes and joints should be loosened and removed.
4. After pumping, run a pump to clean the pump.
5. If long time not use, no suction, just pump in the pump water, electricity and air transport for a few minutes.


Package inckuded:
1 X Pump
2 X Hard Tubes
1 X Hose