Related posts

Feature

Compatible with: Marantec 868,3Mhz D302-868 / D304-868 / D313-868 / D321-868 / COMMAND 131-868. 433,92Mhz: D302-433 / D304-433 / D313-433 / D321-433 / COMMAND 131-433 remote controls!!!)
2 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously
Very low price, Instructions included !!! It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel. If you will need any technical support - i'm always at your service!!!
This receiver can be used in cases, when your original receiver's memory is full and can't accept any additional remote controls. By connecting this receiver to your system, you can increase the ammount of remotes up to 400. So 400 remote controls can be added to your existing system.
Can learn and use most 300-868 Mhz Fixed and Rolling code remote controls !!! ( Such as : Liftmaster, Chamberlain, Motorlift, Homentry, Hormann, Marantec, Nice, V2, BFT, BENINCA, DOORHAN, TORMATIC, SEIP, NORMSTHL, NOVOFERM and much more,)

Description

This receiver fully compatible with the following 433,92Mhz and 868,3Mhz Marantec remote controls: Marantec D302-868 / D304-868 / D313-868 / D321-868 / COMMAND 131-868, D302-433 / D304-433 / D313-433 / D321-433 / COMMAND 131-433 Brand selector: With 8 dip switches user can make different combination for different remote brands. The brands selection you will find in the manual provided. For 868,3Mhz Marantec remote controls, just move Dip-switches 4,5,6,7,8 UP. For Marantec 433,92Mhz remote controls, just move Dip-switch 7 UP. Learn Button and LED: There're 2 independent channels. Each channel has independent learn button S1, S2 and L1, L2. 2. Power Input Selector: This receiver can work at AC/DC 12V~30V. However, it's better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V. 3. Exchangeable Memory Card: The memory card can be removed from board for read, copy and backup. 4. Programming procedure: 1) Select the correct brand for remote to be programmed by moving dip switches UP or DOWN. For 868,3Mhz Marantec remote controls, just move Dip-switches 4,5,6,7,8 UP. For Marantec 433,92Mhz remote controls, just move Dip-switch 7 UP. 2) Press the learn button. The will LED turn on. 3) Press the button on the remote, the LED flashes 4 times. It means that remote control was programmed successfully. 4) Repeat step 2 for another button. 4. The 2-nd channel programming procedure is the same. 5. Erase all data from the memory card: Press and hold either learn button. The LED will start flash. Keep this button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered. Here is a promotional video of this receiver: https://www.youtube.com/watch?v=S08cg73rGxY&feature=youtu.be IF YOU WANT TO INCREASE REMOTE RECEPTION RANGE UP TO 250 METERS, YOU CAN USE THIS 433,92Mhz AERIAL: http://www.amazon.de/dp/B018PC84QQ