Related posts

Feature

Integrated 0 configuration: BLE Module Integrated 0 configuration,setting the FC parameters via mobile device.iOS 10.0+iPhone4S, iPad 3rd Gen. Android 4.3+: Google Play.
Built-in LC Filter: All 5V/9V Output with LC Fliter. Reducing noise,more clear image to display,capture wonderful fpv moments.
Distribution Board: PDB integrated for powering external devices.1*3.3V/1*4.5V/3*5.0V/1*9.0V Output.Direct power to the ESCs.
Support OSD: Adjust color, mode ect,achieve the best use effect,easy to adjust and to solve moire problem.
Built-in Bluetooth Chip: Zero configuration,connect to the SpeedyBee APP directly after powering on,easy to set the FC parameters.

Description

SpeedyBee F4 AIO Flight Controller

MCU: STM32F405(Much better than STM32F1 and F3)
IMU: MPU6000 (Gyroscope More stable)
OSD: BetaFlight OSD w/ AT7456E chip
BLE Module: Inner connect to UART5 for remote setting with SpeedyBee App or other similar apps
BlackBox: 2MB onboard dataflash
Current Sensor: 200A(Scale 302)
Power input: 3s - 6s Lipo
Power output: 4.5V * 1 , 3.3V * 1, 5V * 3 , 9V * 1
Cam And VTX power output: Built-in LC-Filter for 5V and 9V
ESC power output: 4 * VCC output
UART: UART Pads * 3(UART1, UART3, UART4)
UART2 for Receiver: Built in inverter of RX2 for SBUS input through SBUS pad, RX2 pad used for PPM, DSM2, DSMX, IBUS
RSSI input: RSSI input solder pad
I2C: Used for external GPS, Barometer module
Buzzer: Buz- and 5V pad used for 5V Buzzer
ESC signal: s1 - s7
LED pin: Used for WS2812 LED
Boot button: Used to easy enter DFU mode
Weight: 8.8g/0.02lb
Dimension: 36*39*7mm/14.17*15.35/2.76in
Package Including
1 * SpeedyBee F4 AIO Flight controller
6 * M3*3+3 Nylon column
6 * M3 Nylon nut
6 * M3 Anti-vibration Gasket
1 * Rubycon 35V 470uf capacitor
1 * Manual