Related posts

Feature

Advice: 2.12X12mm size microchip suitable for big animals , such as horse ,cow , big dog , for small animals ,such as cat , and little dogs Hamster, I advice you buy 1.4X8mm size from another listing
Content - It is a bundle of 20 microchips inside one packet. All the syringes are carefully prepared under sterile condition and have a strong plastic cover over the needle. It comes with a easy to push injecting facility and thus is convenient for usage.134.2 Khz 2.12mm*12mm, and each have 6 barcode stickers
Technology - The microchip is an integrated circuit which enables one in easy identification and uses passive RFID (Radio frequency Identification) Technology for its construction. The chip contains data that is unique to the microchip and the information about it is easily transmitted on using the scanner.
It can be easily injected by veterinary doctor or someone trained in it below the skin at back of the neck or underneath ears. It takes few seconds to inject the microchip and is not very painful for the pet. It is a glass tag and small in size for easy injection. for injection step it is very important , pls the the product description for how to inject .
Unique ID code in implant chip detects your pet only.The microchip itself has no internal energy source, so it will last the life of your pet. It is read by passing a microchip scanner over the pets shoulder blades

Description

A veterinarian simply injects a microchip for pets, about the size of a grain of rice (12mm), beneath the surface of your pets skin between the shoulder blades.
The process is similar to a routine shot, takes only a few seconds, and your pet will not react any more than he would to a vaccination.
No anesthetic is required.
A Manruta microchip is permanent pet ID. The microchip itself has no internal energy source, so it will last the life of your pet.
It is read by passing a microchip scanner over the pets shoulder blades. The scanner emits a low radio frequency that provides the power necessary to transmit the microchips unique cat or dog ID code and positively identify the pet.The injection process is similar to a routine vaccination: quick and easy.
The international normed place for the injection is on the animal's left neck.
If you have any problems, please feel free to contact us before rating us or the product.
We are always glad to help!
How to inject it?
1, scan the animal, make sure there is no microchip in your pet
2, make sure that the packing is undamaged and then open the package
3 take out the syringe and barcodes
4, remove the red limit card of the syringe and open the lid. Attention:Remember that the needle tip must not be lowered to prevent microchips from coming out.
5,sterilize the parts of the animals that will be injected with iodine
6 useyour left hand pinches the skin and use your right hand to hold the syringe, and the needle is better 15 degrees to the skin.
7, the right hand pushes the syringe to the bottom, and it will hear a click, and use cotton ball to hold the injection site and gently pull out the needle.
8, hold the injection site for 10 seconds with cotton ball, which is good for wound closure.
9, using a scanner to read the chip
10, it will display 15 ID numbers on scanner