Portable Handle Geiger Counter 0.01 Sv/h DIY Kit Nuclear Radiation Detector With Miller GM Tube Gamma Beta Ray Suit for Arduino

Related posts

Feature

This Nuclear Radiation DIY Detector Kit. Arduino compatible kit. Can drive M4011,STS-5, SBM20 or J305 Geiger tubes on the PCB.
Has voltage compatibility with all popular GM Tubes that requires anode voltage 350-500V.
The kit has visual and sound indication of the radiation and can be used as detector of dangerous radiation levels or radioactive materials in your environment.
Excellent cheap solution for Arduino COSM monitoring station. Good kit for MCU software developers that just want to drive Geiger Tube for their own software.
Include PDF manual with instruction and Arduino code examples. The kit is compatible with "Radiation Logger" via Arduino SPI.

Description

MODEL:NGMC-V1
Arduino Compatible Board
Geiger Tube is included !
Could be connected to PC directly to do realtime moniting.
we also provide free matlab source code to do moniting and analysis.

Testing Video:
youtu.be/V-yCGMnZSoU

Piking list:
1 x Assembled Radiation Detector system
1 x GM Tube(M4011), already assembled on PCB board.
1 x Power supply cable
1 x Materials are sent through email address.
1 x Battery Holder (without batteries)
3 x Jumper Wires

Technical specifications:
Geiger Tube PCB Compatibility: M4011, STS-5, SBM-20, J305
Geiger Tube Voltage Compatibility: All General GM Tubes with anode voltage 350-480V
Sound and Visual Indication
Arduino Compatible
Supply Voltage: 5V; 3x 1.5V Battery; 4x 1.2V Battery
Include high impedance voltage divider
Supply Current: 12mA - 30mA
Dimensions: 120 x 50 mm
Shipping Weight: 150gr

Arduino MCU Communication:
The PCB has 3 pins for communication with MCU: INT, GND, 5V. You can power up the kit from 5V Arduino board directly. Or,
if you use batteries for Geiger Kit, you have to connect only 2 pins to Arduino: INT and GND.
There is many different application you can use this kit, especially if you are software developer. The board send 500 uS