Related posts

Feature

It can provide protection for 10 cells in series;Charge/Discharge : Same port (+/-);
Balance Charging function;
-Cell must be connected in parallel, after then connected in series
-Order of connection:; Step1: Connect charging /discharging wire , battery pack negative wire; Step2After confirm the wires are connected OK, plug the connector cable in the BMS
DO NOT plug CONNECTOR CABLE in the BMS before connect wire!! Attention, ESD protection during work.

Description

Battery system:NCM, LiMnO2,LCO
Battery Links:10S
Input Charging Voltage: 42V1%
Input Charging Current:45A( Max)
Output Discharging Voltage:24.7V(Min)
Output Discharging Current :45A(Max)
Peak Discharging Current :100A
Operating Temperature: -30 ~ + 80
Humidity (No Water-Drop): normal RH
Storage Temperature:Humidity (No Water-Drop) :normal 0% RH
Protection Parameters (for Individual Cell)
Over-Charge Voltage Protection:4.28V50mV
Over-Charge Protection Delay Time :100mS
Over-Charge Voltage Protection Release :4.08 V50mV
Balance charge detection voltage :4.20V25mV
Balance charge release voltage :4.20V50mV
Balance charge current:605mA
Over-Discharge Voltage Protection :2.55 V80mV
Over-Discharge detection delay:50mS
Over-Discharge Voltage Protection Release : 2.90V 100mV
Over-current detection voltage:150mV
Over-current detection delay:15mS
Over-Current Protection:20020A
Over-Current Protection Release:Removed the load
Short circuit current protection:normal function
Short circuit detection delay:200S
Short circuit protection Release:Remove the load
Current Consumption
Normal Mode 50 A
UVP Mode 10 A
Main circuit conduction resistance-----------15 m
PCB dimension including heat dissipation plate---120*60*9mm
Attention when connecting.
WARNING:
When we connect BMS with cells or disassemble BMS from battery pack, the following order and regulations must be complied with to avoid damage of components of BMS and problems of not protecting of cells.