Hetingprotool English 10 Frequency NFC RFID Card Copier Reader for IC ID Cards and All 125kHz Cards

Related posts

Feature

The device can duplicate and write these frequencies cards:125kHz prox Card1386/1326/1346/T5577. ID card: 125 KHz, 250 KHz, 375 KHz,500 KHz, 625kHz, 750 KHz, 875 KHz, l000 KHZ. It also can crack 13.56 mHz IC card. (Only supports partial sector encryption IC card, not support all sectors encryption IC card).If your card is all sectors encryption,the device will show ''Decoding fails, please try to decode an upgraded version!''
10 Frequency Copy Encrypted NFC Smart Card RFID Copier ID/IC Reader Writer,which can crack the 13.56mhz encrypted IC card.
Powered by 4 AAA batteries(not included), easy to carry.Also can use USB cable power supply.
Supported operating systems: Windows 98, ME, NT, 2000, XP, 2003, Vista,Windows XP x64, 2003 x64, Vista x64,Linux,win10,WinCE 5.0 (Windows embedded Compact).Sub-code: CTCSS 99.Range: up to 3 km(open field).Size: approx. 10 x 4 x 1.28cm.

Description

Please place order only when you are sure it works for your card.
We will ship your order from US for US address with quality assurance .
 How to operate this card duplicator reader?
 How to write 13.56mHhz cards?

When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.Connected this copier with computer via USB cable,then Press the "on/off" button,then the copier will show the "Disclaimer"page,NOT press any button on the Copier,then your computer will show a removable disk,open the disk,there are manual and the software,Press the button "OK" to agree with the Disclaimer on the computer firstly,then argee with the copier's "Disclaimer"page,that's will be connected successfully,put your original cards on the back side of the Read/Write area,then press the button "scan"to crack the passwords,after 2 or 5 minutes,the passwords will be cracked successfully,then put one cards in the read/write area,then press"write"button,that's ok.

How to copy the 125khz RFID cards

1.Press the "on/off "button,put the original 125khz cards on the back of the copier,the copier will be show the "Disclaimer"page.
2.Press "ok" button, then put the cards on the back side of the copier and press"scan".This copier will auto scan its frequency and show the card number.
3. Put one 125kHZ writable key on the back of the copier, then press"Write".It will be written successfully