Related posts

Description

iMAX New YOUYUE 858D Hot Air Gun Rework Station SMD Solder Soldering Digital 110V 700W Operation Instruction: 1. To put the unsoldering equipment ready, and leave handle on the holder 2. To connect the power 3. To set the blast nozzle (large caliber nozzle preferred). 4. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED) 5. To pressor button (revolving switch )as to set up the temperature. Available in microcomputer with digital LED) 6. To turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication 7. To hold the handle, so the equipment begin to heat. To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table. 8. To put back the handle on the holder after the work; meanwhile,the unsoldering equipment switch from heating mode to cooling heating element mode automatically. while the temperature is lower than 100C,the screen displays"-" it stands for switching to standby mode,and after the temperature of heating element is less than 70C,the equipment is on standby. 9. To switch off the power unplug if there is no operation for a long period of time. Specifications: Operating Volatge: 110V Output Power:700W Type of Pump & Airflow: Brushless fan with soft air Noise: Less than 45dB Temperature Range: 100 to 480 Air Flow: Max. 120L/min Component Length of Handle: 120cm Display: Digital LED Attention: Try to set up the temperature as lower as possible and the airflow as much as possible as to keep heating element working longer and protect IC chips. Please know that before you use the item : Put away desoldering station,connected air gun handle, the handle must be set in the handle racks,otherwise air gun will not work(it has the unique security in other parts of fire or other accidents),