Related posts
Feature
JTAG/SPI/I2C/Serial/TTC interfaceUSB 2.0 high speed interface (FT232H)
Windows Hardware compatibility Certificated driver, supports Windows including Windows 10
Debrick router and/or cable modems
openOCD, UrJTAG, zJTAG, XC3SPROG, Flashrom etc
Description
This TIAO USB Multi-Protocol adapter is powered by FTDI's flagship communication chip FT232H.
It supports the following protocols: JTAG, SPI, I2C and serial. This board can support voltage from 3.3v to 5.0v.
Supported softwares:
- Openocd
- Urjtag
- FlashRom
- zJTAG - Windows console JTAG application to debrick wireless routers
- XC3SPROG - Windows / Linux console application to program CPLD/FPGA
- TIAO USB Multi-Protocol Adapter Lite
- Dual Row 2x40 pin 2.54mm header (3 PCS, headers are NOT presoldered on the board)
- Female to Female Solderless Flexible JTAG Jumper Cable Wires (Length: 20cm, 8 PCS) Technical Specifications:
- USB 2.0 Hi-Speed (480Mb/s)
- JTAG / IEEE 1149.1 compatible.
- JTAG Baudrate up to 30Mbits/sec (programmable)
- JTAG signals are 5V to 3.3V tolerant
- ARM Muli-ICE 20-pin header compatible.
- Separate SPI/I2C/Serial interfaces
- 4 on-board LEDs / PWR, ext PWR, TX and RX
- 1 2x10 20 PIN JTAG header
- 1 2x3 6 PIN SPI 2.54mm IDC header
- USB Hot-Plug / JTAG Hot-Plug.
- USB over-current protection via on-board resetable fuse.
- Strong ESD protection on USB signals.
- Based on the FTDI FT232H USB device.
- Designed for FTDI MPSSE easy-to-use.
- Free drivers for Linux.
- Free drivers for Windows XP, Windows Vista and Windows 7
- Support both 32 bit and 64 bit operating systems
You can use this USB based multi-protocol adapter lite to JTAG your router, cable modem or any JTAG/SPI devices.