Related posts

Feature

Your waist size is NOT your belt size, please read sizing info below BEFORE ordering.
1.75" wide belt - double layered nylon with insert for added rigidity
Cobra quick release buckle (made in Austria)
Resin tipped tongue of belt for easy threading through belt loops
Designed and Manufactured in the USA with USA nylon

Description

If you are looking for an extra stiff belt to carry all your gear, look no further. The 1.75" Zenith Belt is made with an insert for added rigidity. Other manufacturers use multiple layers of nylon for added stiffness, making their belts overly thick and uncomfortable. The Zenith's insert adds rigidity without sacrificing comfort. With its high wearability and Cobra load-bearing, quick-release buckle, this belt works great alone or as an inner with a battle belt system. Made In The USA ------ How our belts are sized: Our belts are extremely accurate, measured in inches around the inside circumference of the belt. Due to the design of the belt there is no play on either end of the size range. ------ How to find the right size: Your belt size is not your waist or pant size; you need to allow for the material you are wearing under your belt. Additionally, if you are wearing an IWB holster or other gear it will artificially increase your waist size. ------ There are two methods you can use to find the right belt size. If you have access to a cloth measuring tape, run it through your belt loops like a belt. Make sure you are wearing the same setup that you will utilize your Boxer belt with (e.g. IWB holster or other gear). Pull the measuring tape as tight as you'd like to wear your belt and note that measurement. If you don't have access to a cloth measuring tape, no worries. Find a belt that fits you properly, lay the belt flat and use a standard measuring tape to measure from the buckle base to the belt hole that is most comfortable.