Related posts

Feature

The Ram-Pro Countersink & Counterbore Wood Drill Bit Kit pre-drills holes and countersinks even hardwood and aluminum, thereby reducing the risk of splitting the panel, and giving every screw nail or bolt a nice appearance as it appears flush with the furniture's surface, and can be covered nicely with wooden plugs.
SPECS: 7 Countersink 4-Fluted Bits with 7 Hex adjustable Depth Stop Collars, Compatible with Screw Sizes: #5, 6, 7, 8, 9, 10, 12. - Bit sizes: 1/8", 9/64, 5/32, 11/64, 3/16, 13/64, & 7/32 inch - Allen Wrench: 3/32" diameter.
DESIGN & QUALITY: No More Splitting Woods! The Ultimate 2-in-1 countersink drill bit design Made of high speed heat treated Carbon Steel so the bits have sharp tips and are able to sustain through heat and pressure without breaking/shattering and damaging the panel or beam you are building - Bit sizes are carved onto the drill bits for identification.
NICE APPEARANCE: The drill bits drills pilot holes nicely and accurately with precision time and time again getting a precise cone shaped hole on each burr, as a result you will get a nice smooth surface on any type of hard, soft wood or aluminum.
USES: Attach to any Power Bench or Hand drill driver - When Woodworking or Building Molding, enlarge and bevel the rim of a drilled hole so that a screw, nail, or bolt can be inserted flush with the surface you are working on, Example: Hinges - the bits also wipe away any burr left from any application, thereby improving the finish and removing hazardous edges.

Description

About The Ram-Pro Countersink Drill Bits Kit

So you are building any project at your home office or workshop & you would like those screws, Nails or Bolts to be flush mounted flat with the surface so they won't stick out, so you would countersink the screw holes.

But why pre-drill with 1 bit & countersink with another 1 when you can have it in 1 easy tool?!

OUR SOLUTION:
The Ram-Pro Professional 3-in-1 Counter-sinking Drill Bits lets you Pre-drill & cone-shape the hole where the screw heads will countersunk & sit comfortably below the surface of the surroundings.

Kit also includes stop collars for controlling drill bit depth to a precise setting.

It's recommended to use drill collars with a lubricant to prevent burning of the material surface.

ADJUSTABLE:
Both the Countersink bits & the collars have hex nuts for easy adjusting tightening & accurate positioning.

Kit comes with the Correct Allen Wrench for tightening the nuts.

USE FOR:
Great for hinge, Stair book case, coffee table, chair, cabinet, closet, wall, desk, bed, kitchen, bedroom, office, studio, dresser, bench.

Countersink may also be used to remove burr left from a drilling/tapping operation thereby improving the finish of the project & removing any hazardous sharp edges.

(Countersink unlike counterbore makes a cone shaped hole while bore produces a Flat-bottom rounded hole.)

YOU GET:
7 Drill bits
7 Countersink bits
7 Stop Collars
Allen Wrench

Bit lengths:
#5 3-1/32
#6 3-5/32
#7 3-2/8
#8 3-11/32
#9 3-5/16
#10 3-9/16
#12 3-9/16

Easy identification:
Bit Sizes are carved on the bits for clear identification which bit for the correct screw.

Works with all types of wood/lumber: Plywood, Pine, Oak, Birch, Mahogany, Maple, Cedar, Fir, Cherry, Poplar, Alder, Ash, Walnut, Hemlock.

A must have for every woodworker & carpenter.