Related posts

Feature

Color: platinum
Lockers are painted same color throughout
Cell phone/tablet lockers ship fully-assembled
All components 20 gauge cold rolled steel
Hinges: 16 gauge continuous piano hinge

Description

Lockers shall Be "Galvanite KD Wardrobe and Box Lockers" is fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to touch. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle. All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit. Fabricate of 16 Gauge (minimum) galvanneal sheet steel channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members. Rubber bumpers shall be provided to cushion door closing. Doors 12" wide x 24" high and over to be fabricated from single sheet prime 16 Gauge galvanneal sheet steel with single bends at top and bottom and double bends at the sides. Doors shall include a combination friction catch door pull. Padlock Strike Plates are optional. Doors shall be fabricated to accept a built-in combination lock or padlock. Doors with projecting spring latches shall not be acceptable. Doors shall be louvered. The latching mechanism for wardrobe doors shall be finger lift control type constructed of 14 Gauge (minimum) steel with a nylon cover that has a generous finger pull. Spring activated nylon slide latches shall be completely enclosed in the galvanized lock channel allowing doors to close with the lock in the locked position. Locking devise shall be designed for use with either built-in combination locks or padlocks. Latch hooks shall be securely welded to the vertical frame channel on the strike side to engage the nylon slide latches. All doors to be right hand, side hinged. Fabricate back and sides of 24 gauge (minimum) galvanneal sheet steel, with double flanged connections extending full height.