1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (standard USA pipe thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.

Related posts

Feature

VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.
1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in U.S..
SOLID BRASS. This valve's body is made of solid brass (very corrosion resistant material).
WARRANTY-all U.S. Solid valves come with a 1 year warranty. Contact [email protected]
DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid's magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.

Description

1/4" NPT port, brass body, VITON seals, 12 volt DC, for air, water, or fuel (disel, gasoline, oils and other hydrocarbons).

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton seals.

The direct current coil energizes at 12 volts DC; (It doesn't not matter which line is positive and which is negative, the valve will energize identically) Voltage range + or - 10%. 12 Watt power rating.

Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.

1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60F with a pressure drop of 1 PSI (0.23 Cv).

Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank, auxiliary gas tanks and many other.

Manufactured in China. Model: USS2-00051. Quality assurance and/or conformity managed in accordance with standards: