We spent many hours on research to finding arduino nano v3.0 cable, reading product features, product specifications for this guide. For those of you who wish to the best arduino nano v3.0 cable, you should not miss this article. arduino nano v3.0 cable coming in a variety of types but also different price range. The following is the top 10 arduino nano v3.0 cable by our suggestions:
Reviews
1. Aideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino
Feature
Designed for Arduino Nano V3.0The item is a terminal expansion adapter, working very well for prototyping Arduino Nano projectsFinished ProductThese boards are fully assembled. No soldering required. Size is about 2.21" x 1.65" x 0.50" (L* W* H)
Nice Platform for Wiring CircuitsIt provided a nice platform for wiring circuits to Arduino Nano.It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano
Easy to UseYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard
Little TipsIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). Any questions, you can contact me by email at any time
Description
This is a small and simple Arduino nano expansion board.It will lead out all the Nano pins, it is convenient for us to wiring and experiment.
Features:
Great for temporary things you don't want to solder.
It provided a nice platform for wiring circuits to an Arduino Nano. It can be used in conjunction with or in place of a breadboard.
It lets you make a temporary circuit without the reliability issues you get with prototyping boards, but maybe need a bit more effort.
You need to use your Nano to hold the black pin headers straight and flat during soldering.
Size: about 2.21" x 1.65" x 0.50" (L* W* H)
Package Included:
5 x Nano Terminal Adapter Expansion Boards
2. ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
3. WYPH Nano Terminal Adapter for Arduino Nano V3.0 AVR ATMEGA328P-AU Module Board
Feature
This is a terminal adapter for the Arduino NanoIt lables for Arduino Nano version 3.0
You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires
Pack of 1pcs
Description
This is a terminal adapter for the Arduino Nano. It lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). You can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.Package Included:
- 1 X Terminal Adapter board for the Arduino Nano V3.0 AVR ATMEGA328P-AU Module
4. Diybigworld Nano V3.0 controller compatible for arduino nano FT232 chip USB driver NO CABLE 10pcs/lot
Description
Nano V3.0 controller compatible for arduino nano FT232 chip USB driver NO CABLE 10pcs/lot5. LILIERS 5pcs Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NO CABLE NANO V3.0
Description
5pcs Nano V3.0 ATmega328P controller compatible for arduino nano CH340 USB driver NO CABLE NANO V3.06. Mini Nano V3.0 ATmega328P Microcontroller Board USB Cable for Arduino
Feature
Microcontroller ATmega328POperating Voltage (logic level) 5 V
Input Voltage (recommended) 7V-12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
Description
Features:Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
Fully Compatible to Arduino Nano V3.0 ATmega328P-AU
ATmega328 Microcontroller
Bootloader installed, ready to upload sketches from Arduino software
Microcontroller ATmega328P-AU
Operating Voltage :5V
Input Voltage (recommended) 7V-12V
Input Voltage (limits) 6V-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 8
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Dimention:Approx. 45x17x19mm
Cable Length:245mm
Color:Blue(as the picture shows)
Package:
1 xNano V3.0 ATmega328P Arduino Compatible Board
1 xMini USB Cable
7. Emakefun for Arduino Nano Project Super Starter Kit with Detailed Tutorial for Arduino Nano V3.0 ATMEGA328P
Feature
Emakefun Nano Kit is a super starter kit based on Nano V3.0 Micro-controller boardIt has 60pcs components with detailed tutorial in a CD including project introduction and source codeThe CD-ROM with ios, windows, linux three systems CH34x driver, no need to worry about driver incompatibility issues
It's the newest ultimate Nano Starter Kit with free PDF tutorial(11 lessons)
The Nano Mainboard with pin header (not need to be soldered by yourself)
The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino,so pls,use the driver from above link:https://github.com/emakefun/emakefun-nano-kit
Description
Component listing:1 x Project Box1 x Emakefun Nano Controller BoardSG90 servo motor1 x USB mini line1 x Fan1 x DC Motor1 x 400 Holes Breadboard10 x Resistor(220)10 x Resistor(560)10 x Resistor(1k)10 x Resistor(4.7k)10 x Resistor(10k)10 x Resistor(1M)10 x Resistor(10M)5 x 1N40071 x 4-Digit 7-Segment Display1 x L2931 x Active Buzzer1 x 4N251 x tiltSensor1 x 10k Potentiometer3 x Photosensitive resistor2 x NPN Transistor (8050)2 x NPN Transistor (8550)4 x Big Button4 x Big Button cap1 x flame sensor1x LM35Temperature Sensor1x RGB LED10 x white LED10 x Red LED10 x Green LED10 x Orange LED10 x Blue LED1x Register Card2 x 24cm Jumper Wire (Male to Male)2 x 20cm Jumper Wire (Male to Male)4 x 16cm Jumper Wire (Male to Male)22 x Jumper Wire 12cm (Male to Male)1 x 10pin Female-to-male Dupont Wire1 x Cover1x CD-ROM8. Keywish For Arduino Nano V3.0, ATmega328P Moudle Nano Board CH340 With USB Cable Compatible With Arduino Nano V3.0 (5pcs Nano Board & 1pcs Cable)
Feature
CH340G Replace FT232RL,so pls. use the driver from this link: https://github.com/keywish/arduino-nano-kitThe Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The Arduino Nano is a compact board similar to the UNO.The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Quick-responding technical support for free.
Description
Specification: -CH340G Replace FT232RL. -Operating Voltage(logic level): 5V. -8 analog inputs ports:A0 ~ A7. -14 Digital input / output ports:TX,RX,D2 ~ D13. -6 PWM ports:D3, D5, D6, D9, D10, D11. -1 pairs of TTL level serial transceiver ports RX / TX. -Support USB download and Power. -Support for external 5V ~ 12V DC power supply. -Support power supply by 9V battery. -Support ISP download. Package including: 3 x Arduino Nano V3.0 with 1 x USB Cable9. HWAYEH for Arduino Nano V3.0, Nano Board CH340/ATmega328P 5V 16M Micro-Controller Board with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 1 + Cable)
Feature
The Arduino Nano is a compact board similar to the UNO.The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.Each of the 14 digital pins on the Nano can be used as an input or output.They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
Suitable for DIY enthusiasts to develop and use school textbooksThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino
Microcontroller ATmega328P Operating Voltage (logic level) 5 V Input Voltage(recommended) 7V-12V Digital I/O Pins 14 (of which 6 provide PWMoutput) Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
Description
HWAYEH For Arduino Nano V3.0 CH340/ATmega328P, Mini Nano V3.0 ATmega328P Microcontroller, Board w/USB Cable For Arduino,(Nano x 1 + cable)
Features:
Ch340G Replace FT232RL
Operating Voltage(logic level):5V
8 analog inputs ports:A0~A7
14 Digital input / output ports:TX,RX,D2~D13
6PWM ports:D3,D5,D6,D9,D10,D11
1 pair of TTL level serial transceiver ports RX / TX
Support USB Download and Power
Support for external 5V ~ 12V DC power supply
Support power supply by 9V battery
Package include:
1PCS x ForArduino Nano V3.0 with for ATMEGA328P Module
1PCSx Mini USB
10. ELEGOO For Arduino Nano V3.0, Nano board CH340/ATmega328P with USB cable, compatible with Arduino Nano V3.0 (Nano x 1 + cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
1 X Nano Board
1 x USB cable