Expert choice for 625 2rs bearing

We spent many hours on research to finding 625 2rs bearing, reading product features, product specifications for this guide. For those of you who wish to the best 625 2rs bearing, you should not miss this article. 625 2rs bearing coming in a variety of types but also different price range. The following is the top 9 625 2rs bearing by our suggestions:

Product Features Editor's score Go to site
625-2RS two side rubber seals bearing 625-rs ball bearings 625 rs 625-2RS two side rubber seals bearing 625-rs ball bearings 625 rs
Go to amazon.com
2x 625-2RS Ball Bearing 5mm x 16mm x 5mm Rubber Seal Premium RS 2RS Shielded 2x 625-2RS Ball Bearing 5mm x 16mm x 5mm Rubber Seal Premium RS 2RS Shielded
Go to amazon.com
FAG 6203-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 40mm OD, 12mm Width, 12000rpm Maximum Rotational Speed, 1070lbf Static Load Capacity, 2150lbf Dynamic Load Capacity FAG 6203-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 40mm OD, 12mm Width, 12000rpm Maximum Rotational Speed, 1070lbf Static Load Capacity, 2150lbf Dynamic Load Capacity
Go to amazon.com
Ball Bearing 625 2RS 5x16x5 (50 Pack) Ball Bearing 625 2RS 5x16x5 (50 Pack)
Go to amazon.com
(Qty. 10) 625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3 (Qty. 10) 625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3
Go to amazon.com
625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3 625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3
Go to amazon.com
625-2RS Bearing; Light Load, Deep-Groove, Double Rubber-Seals; 16*5*5 (Pack of 5) 625-2RS Bearing; Light Load, Deep-Groove, Double Rubber-Seals; 16*5*5 (Pack of 5)
Go to amazon.com
FAG 6202-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 15mm ID, 35mm OD, 11mm Width, 14000rpm Maximum Rotational Speed, 843lbf Static Load Capacity, 1750lbf Dynamic Load Capacity FAG 6202-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 15mm ID, 35mm OD, 11mm Width, 14000rpm Maximum Rotational Speed, 843lbf Static Load Capacity, 1750lbf Dynamic Load Capacity
Go to amazon.com
FAG 6305-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 25mm ID, 62mm OD, 17mm Width, 7500 rpm Maximum Rotational Speed, 2600 lbf Static Load Capacity, 5000 lbf Dynamic Load Capacity FAG 6305-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 25mm ID, 62mm OD, 17mm Width, 7500 rpm Maximum Rotational Speed, 2600 lbf Static Load Capacity, 5000 lbf Dynamic Load Capacity
Go to amazon.com
Related posts:

Reviews

1. 625-2RS two side rubber seals bearing 625-rs ball bearings 625 rs

Feature

625-2RS two side rubber seals bearing 625-rs ball bearings 625 rs
Radial (Deep Groove) bearing
ISO 9001:2000
Material: Chrome Steel (Gcr15)

Description

***RPM Limit Grease 37200 rpm Oil 38700 rpm ***Dimension D (Outside) 16 mm d (Inside) Bore 5 mm B (Width) 5 mm ***Deep Groove Ball Bearing ISO 9001:2000 ***ABEC Tolerance Codes ABEC1/C3 ***Vibration Level V1 ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C)

2. 2x 625-2RS Ball Bearing 5mm x 16mm x 5mm Rubber Seal Premium RS 2RS Shielded

Feature

Inside Diameter d (mm) :70
Outside Dimensions D (mm) :100
Width B mm : 16

Description

Brand New Bearing Replacement

3. FAG 6203-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 40mm OD, 12mm Width, 12000rpm Maximum Rotational Speed, 1070lbf Static Load Capacity, 2150lbf Dynamic Load Capacity

Feature

Deep groove geometry for high speeds and supporting both radial and axial loads
"Light" bearing design for use in limited space applications or for average loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Description

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated "Light," making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut fr Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

4. Ball Bearing 625 2RS 5x16x5 (50 Pack)

Feature

625 2RS Ball Bearing
ABEC 1
5mm Bore
16mm OD
5mm Width

Description

These are the bearings that are included with theOpenBuilds V Wheel Kits but with their standard sizing they can also be used in many other projects as well.They are awesome and super affordable! Grab a bunch today

5. (Qty. 10) 625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3

Feature

625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3
Radial (Deep Groove) bearing
EMQ ( Motor quality ) bearing
Material: Chrome Steel (Gcr15)

Description

***RPM Limit Grease 37000 rpm ***Dimension D (Outside) 16 mm d (Inside) Bore 5 mm B (Width) 5 mm ***Deep Groove Ball Bearing ISO 9001:2002 ***ABEC Tolerance Codes ABEC3/C3 ***Vibration Level V2+ ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C)

6. 625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3

Feature

625-2RS Premium 625 2rs seal bearing 625 ball bearings 625 RS ABEC3
Radial (Deep Groove) bearing
EMQ ( Motor quality ) bearing
Material: Chrome Steel (Gcr15)
Flat Rate Shipping cost (USA Only) ** 1pc or 1000pcs the shipping price will always same.

Description

***RPM Limit Grease 37000 rpm ***Dimension D (Outside) 16 mm d (Inside) Bore 5 mm B (Width) 5 mm ***Deep Groove Ball Bearing ISO 9001:2002 ***ABEC Tolerance Codes ABEC3/C3 ***Vibration Level V2+ ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) ****Flat Rate Shipping cost (USA Only) **** 1pc or 1000pcs the shipping price will always same.

7. 625-2RS Bearing; Light Load, Deep-Groove, Double Rubber-Seals; 16*5*5 (Pack of 5)

Feature

As in the photos, bearings may be marked "625-RS," but they are in fact 625-2RS, having rubber seals on both sides.
Light-load deep-groove bearings
Inner diameter: 5mm; Outer diameter: 16mm; Height: 5mm
Comes in a pack of 5 bearings

Description

Standard, economical, light load, deep-groove bearings with rubber seals on both sides. As in the pictures, the bearings may be marked with "625-RS"; however, they are in fact 2RS-type bearings, meaning that they have rubber seals on both sides. Inner diameter: 5mm. Outer diameter: 16mm. Height: 5mm.

8. FAG 6202-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 15mm ID, 35mm OD, 11mm Width, 14000rpm Maximum Rotational Speed, 843lbf Static Load Capacity, 1750lbf Dynamic Load Capacity

Feature

Deep groove geometry for high speeds and supporting both radial and axial loads
"Light" bearing design for use in limited space applications or for average loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Description

This FAG Light 6200 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated "Light," making it applicable for average radial loads and light axial loads where space is tight and shaft diameters are relatively large. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that is fastened to the outside ring, and extends over the rolling elements and to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold lubricant applied during manufacturing that will last the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut fr Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

9. FAG 6305-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 25mm ID, 62mm OD, 17mm Width, 7500 rpm Maximum Rotational Speed, 2600 lbf Static Load Capacity, 5000 lbf Dynamic Load Capacity

Feature

Deep groove geometry for high speeds and supporting both radial and axial loads
"Medium" bearing design for average to above average radial loads and light to average axial loads
C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
Sheet steel cage evenly spaces balls for reduced friction, vibration, and noise
Rubber seals on both sides of the bearing keep the lubricant in and contaminants out

Description

This FAG Medium 6300 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and the balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated Medium, making it applicable for use with average to above average radial loads and light to average axial loads. It can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a rubber seal on either side that fastens to the outside ring, extends over the rolling elements, and makes contact with the inside ring to keep out contaminants such as dirt and grime. The seals also hold in a lubricant applied during manufacturing that lasts the lifetime of the bearing. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others.

Specifications Met

Main bearing dimensions DIN 625-1
Basic dynamic load ratings DIN ISO 281
C3 radial internal clearance DIN 620-4 (ISO 5 753)
Shaft and housing tolerances ISO 286
Through-hardening steel for inner and outer rings ISO 683-17
Steel strip for cage EN 10139, SAE J403
Load carrying capacity and life DIN ISO 281 Appendix 1
System for creating part numbers for rolling bearings DIN 623-1

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut fr Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Conclusion

By our suggestions above, we hope that you can found the best 625 2rs bearing for you. Please don't forget to share your experience by comment in this post. Thank you!