Finding your suitable rf switch module is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best rf switch module including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Wireless 433Mhz RF Module Receiver and Transmitter Remote Control Built-in Learning Code 1527 Decoding 4 Channel Output (Transmitter and Receiver kit)
Feature
Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, remote control socket, remote control LED, garage door remote control, remote control door opener, remote control curtains, alarm host, remote control MP3.Superheterodyne
Small size
Multiple working modes : Momentary Mode, Toggle Mode, interlocked mode
Wide voltage input (transmitter) DC 3V-24V
Description
[Transmitter module ] Product Model: TX118SA-4Transmitting power: 11dbm
Emission current: 10 mA
Rate of fire: maximum 10KB / S
Operating Voltage: DC 3V-24V
Encoding : EV1527 1527 Learning code
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.
[Receiver module ] Product Model: RX480-E4
Working Voltage : DC3.3~5V
Quiescent Current : 5mA
Output current : 10 mA
Working Frequency: 433MHz
Receive Sensitivity: -108dB
Working Temperature : -25~75
Working mode: Momentary Mode , self-locking (Toggle-Mode of the 4 Channels) , interlocking
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons.
Pins Instruction
GND : ground or negative pole
+V : DC3.3~5V input
D0: Data output
D1: Data output
D2: Data output
D3: Data output
VT: Output
[How to match the transmitter and receiver]
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times.
2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below).
LED turns on: learning mode is active. Press any button of the remote control.
LED indicator flashes three times: learning successfully completed.
3. Test: after the above operation , the receiver board can be controlled by the remote control.
More transmitters with different IDs can be learned and stored additionally, starting with step 2.
A mixture of different modes is possible.
Button usage (sets mode and starts pairing process):
Press once: Inching mode (Momentary Mode)
Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)
Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)
2. eMylo DC 6V 2x 1 Channel 433Mhz Smart Wireless Remote Control Light Switch RF Relay 2pcs Transmitter with Receiver
Feature
The product adopts RF technology, with long remote control distance and stable signal.The receiving module provides high signal sensitivity at lower cost and resist interference for excellent stability.
It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
The programmable transmitter and receivers can be flexibly configured in quantity and in operating modes.
It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.
Description
Specifications:Receiver
Operating Voltage: DC 6V(5V will also work)
Operating Frequency: 433Mhz
Operation Way: Inching, Self-locking
Coding Way: Intelligent Learning
Output Type: 1 Relay Signal Output
Max load: 10A
Ambient TEMP: -20-65, Humidity<95%
Factory Default: Self-locking
Board DIM: 45x30.5x17mm
Case DIM: 65x37x22
Transmitter
Operating Voltage: DC 12V
Operating Frequency: 433Mhz
Vibration Resistance: 4.7M
Chip Type: 1527/2264
Modulation: ASK (Stable, less interference)
Encode Type: Pads
Battery Type: 12V 23A(not included)
Remote Distance: 30-50m(Theoretical value)
Ambient TEMP: -30 -70, Humidity<95%
Product DIM: 60x38x13
Package Includes:
2X Transmitters
2X Receivers
1X English Manual
3. New Wireless Bluetooth RF Module PCB Board Power Circuit Board Replacement for Xbox One Console
Feature
Replace a malfunctioning RF module circuit board.Microsoft Original Parts.Compatible with All Xbox One Console.
Color : As Pictures Show
Power Switch Board for Xbox One
Package Include: 1PCS
Description
New RF Module PCB Board Power Circuit Board Replacement for Xbox One Console
6 Months Warranty.
Important! Please confirm this item is the right model you need before placing order. Most repair parts are only suitable for special model. This item comes with No Manual , No Instruction Guide, No Video Guide. Professional installation skill is needed. To guarantee all replacement parts are in good condition, we had tested it before shipping. We do not hold any responsibility for damaging of this item cause by your wrong installation or your wrong purchasing.
4. INSMA 433Mhz Wireless RF Switch Long Range DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter & 1 Receiver)
Feature
Long Range Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 98ft/30m with no obstacle.4CH for More ControlAdjustable working way, control equipment turn/reverse, on/off. Switch Self-lock, Jog, Inter-lock.
Security ControlLearning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
Easy to UseExtremely easy to setup, learn, relearn and control(please refer to introduction). Stable and reliable performance, high receive sensitivity.
Wide ApplicationWIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, window, entrance, Garage Doors, alarm system, lifting equipment and so on. NOTE: Please email us if you meet any problem, we are always here to help, thanks!
Description
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap.
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Using Instructions:
1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully.
2. It can learn various chips with the different code wireless remote control.
3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed.
Receiver:
Size: 7.2 x 5.2 x 2.6cm
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40 Degree +80 Degree
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
Remote control transmitter:
Size: 5.8 x 3.9 x 1.4cm
1. Remote Distance: 328ft/100M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
Package Included:
2 x Transmitters
1 x Receiver
1 x Manual
5. 12V 433Mhz 4CH Channel Relay RF Wireless Remote Control Switch Receiver Module for Garage Door Openers Cars
Feature
The controller could be compatible with chips such as 2262/2260/1527/2240Widely used in garage doors, electric shutter doors, telescopic doors
It can learn more than 20 different kinds of chips such as 2262, 1527 of different address codes under the same frequency
Application: remote control, remote measurement and remote sensing, anti-theft alarm signal receiving and various remote controls for home-appliances
Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm
Description
Description:This item could be compatible with chips such as 2262/2260/1527/2240. It can learn more than 20 different kinds of chips such as 2262, 1527 of different address codes under the same frequency. Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm. Widely used in garage doors, electric shutter doors, telescopic doors.
Specification:
Condiiton: 100% Brand New
Working Voltage: DC12V
Quiescent Current: 5mA
Working Frequency: 433Mhz
Receiving Sensitivity: -104dBm
Function option:Momentary/Toggle/Latching/Time delay( 5,10,15,20s available)
Modulation Mode: ASK
Matching Mode: Intelligent Learning code 1527
Output Mode: Dry contact, Voltage output
Working Temperature : -30~+80
Product Size: Approx. 68.2 * 48.2mm / 2.7 * 1.9inch
Package Weight: Approx. 80g
Package Included:
1 x Remote Control Switch
Note: The color is sent in random.
How to use:
1. Output:
Self-locking: Connect 1 and 2 with shorting plug
Non-locking: Disconnect 1 and 2 with shorting plug
Interlocking: Connect 2 and 3 with shorting plug
2. Learning and clear procedures:
Learning procedures: A. Press the learning key, the LED lights. B. Press any key on the remote, the LED flashes three times then turns off, indicating learning successfully.
Clear procedures: Press learning key for 8 seconds, the LED from on to off, indicating clear successfully.
6. Paddsun 315Mhz Wireless RF Switch DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter + 1 Receiver)
Feature
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it
Extremely easy to set up and use.Learning code has HIGH-LEVEL SECURITY for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost.
Description
Features:It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment
turn or reverse, on/off and so on come true.
1. It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial
control and security etc.
2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
3. Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Instructions:
1. Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
3. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
4.Remote Distance: 200M
Output working way:
1. Self-lock ---connect the JP1 with the cutting out cap.
2. Jog---the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock---- Connect the Jp2 with the Cutting out cap,
Jog---- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock----- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock-------press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
7. 1pc 110-240V 6 Channel RF Relay Module Board Remote Control Switch
Feature
Momentary, Self-locking, and Interlock, 3 Commands.This 6-channel multifunction RF receiving controller is for sending open signal and close signal to 6 relays.
Applicate for relays include fields of electronically operated gate, windows, lifting appliance, switch, lifter, industrial control, security industry etc.
High stability, and low power.
Convenient using, just learn to match the code of the remote controller and the receiving controller.
Description
Specifications:Operating voltage: 110-240V(input port)( L connect positive, N connect negtive, G connect GND)
Operating current: About 30mA x 6(Relay close condition)
Static current: About 4mA x 6(Relay open condition)
Work mode: momentary, self-locking, interlock
Working indication light:
Blue light: (relay switch indicator light, independently indicated on each road)
Red light: (signal receive light)
Output mode: mainly used as a switch
Receive distance: Approx. 50-1000meter
Max power: 2500W x 6
Size: 8.5 x 12 cm / 3.35 x 4.72inch
Remote size: Approx. 4 x 9 cm / 1.57 x 3.54inch
Weight: 171g
Momentary & Self-locking & Interlock:
Self-locking: connect the jump cap to point 0 0 ZS(G G) when the power is off.(Press the remote control key and the corresponding output channel state of the module is the opposite) Interlock: connect the jump cap to point 0 1 HS(G V) when the power is off.(Press the remote control key and the corresponding channel relay will open and other channel will close) Momentary: connect the jump cap to point 1 1 DD(V V) when the power is off.(Press the remote control key and the corresponding channel relay will output. Release the key, the output will stop)
Package List:
1 x 6 Channel Relay Module
1 x Remote Controller
8. JahyShow 315Mhz Wireless RF Switch DC 12V 4CH Channel Wireless Remote Control Switch, DC12V Relay Receiver Module, Transmitter Toggle Switch RF Relay (2 Transmitter + 1 Receiver)
Feature
4CH for More Control -turn/reverse, on/off. Switch Self-lock, Jog, Inter-lock. It is a learning code 12v remote control switch wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.Wide Application to different OccassionIt covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system ,lifting equipment,entrance, Garage Doors, industrial control and security etc.
Cover over 328ft Long RangeSignal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is over to 328ft/100m with no obstacle. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
Support different chip and deviceCompatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it
Easy to Use and OperateExtremely easy to set up and use.Learning code has HIGH-LEVEL SECURITY for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost.
Description
FeaturesIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment
turn or reverse, on/off and so on come true.
1. It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial
control and security etc.
2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
3. Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Instructions
1. Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
3. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
4.Remote Distance: 200M
Output working way
1. Self-lock ---connect the JP1 with the cutting out cap.
2. Jog---the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock---- Connect the Jp2 with the Cutting out cap,
Jog---- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock----- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock-------press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
9. ON-Q Switch - Radiant in-Wall 1500W Rf Switch - White (LC2201-WH)
Feature
Patented top dog RF communication Protocol; 900MHz radio. Avoids interference with other 900MHz devices, such as cordless phones and Baby monitors.Legrand patented RF communication Protocol for reduced interference.
Installs easily with no control wiring necessary.
Integrates with Legrand's Intuit Home Intelligence.
Available in three colors: light Almond, nickel, and white.
Description
The radiant collection is a step up from the standard with simple, classic options in wiring devices, home automation controls and Screw less wall plates that complement today's homes.10. Dewenwils Wireless Remote Control Electrical Outlet Switch, RF Remote Control ON OFF Light Switch Kit, No Interference, 15 AMP Heavy Duty, 100' Range, Compact Side Plug
Feature
RF REMOTE CONTROL: RF signal works through walls & doors; remotely control hard-to-reach electric appliances from anywhere in the house; does not require line of sight while using; 100 ft range in open areasNON-INTERFERENCE: Unique advanced technology eliminates self-interference or interference with other existing rf remote control system; no need to worry about duplicate frequency problem or affecting your neighbors lights
COMPACT SIZE & SIDE OUTLET: Takes up 1 wall outlet socket only; smaller than most of other indoor remote control outlets; handy side plug receiver fits easily in tight spaces and behind furniture
PROGAMABLE: Transmitter and receiver have been pre-programmed for immediate use, but you can freely add extra remotes and plugs (Same Model) to expand your remote system or customize the combinations
SIMPLE & CONVENIENT: Hassle-free installation; No programming or tools required; battery included; (15A/1875W) heavy duty; perfect for the elderly and those with limited mobility or back pain; ETL certified and FCC approved
Description
Dewenwils Advanced No Interference Indoor Wireless Remote Controlled Outlet Switch Kit, WhiteHome Automation
Simplify your life by remotely controlling household appliances with a remote controller.
Turn on/off hard to reach switches by just clicking a button.
Perfect for lamp, ceiling lighting, Christmas tree, holiday decoration, fan, and other electrical devices.
Ideal for old folks and anyone with physical limitations.
No More Duplicate Frequency / Code Problem
Advanced variable learning codes technology won't cause self-interference or interfere the other existing remote control systems.
No need to worry about affecting the other wireless outlets you have had or your neighbors' lights any more.
Programmable and extensible with more remotes or outlets (Same Model).
100 FT Remote Control Range in Open Area
Strong radio frequency transmission works through walls and doors.
The wireless range may be shortened by electronic devices, walls, or other physical barriers, so in actual use, the distance maybe slightly less than 100ft.
Space Saving Side Outlet Plug
Plugging electrical devices in from the side, receiver fits easily in tight spaces or behind furniture.
Small size takes up 1 lower wall socket.
Easily carry, hang and keep the remote with the attached key chain.
Regular Standard 3V Battery Included
Regular standard 3V battery has long life and is super easy to be found in stores.
Specifications:
- Input Voltage: 125VAC 60HZ
- Max. Current: 15A Resistive; 5A Tungsten Lamp; 1/2 HP
- Max. Load Power: 1875W
- Transmission Frequency: 433.92MHZ
- Remote Battery: CR2032 3V
Packing List:
- 1x AC Grounded Outlet Switch
- 1x Wireless Remote Controller
- 1x Battery (Installed)
Note:
Keep in mind this switch is turning the power on and off, not fit for devices with electronic switches.
Not fit for right angle plugs.