Finding your suitable fume hood blower is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best fume hood blower including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Laminar Flow Hood 0.25-0.45m/s Air Velocity Laminar Flow Hood Filter VD-650 Air Clean Bench Fume Hood Laboratory (Laminar Flow Hood, Vertical)
Feature
Averange speed:0.25-0.45m/s; Power of fluorescent lamp or UV lamp:10WDimension of working area:50*48*45cm/19.7*18.9*17.7inch, Overrall dimension: 65*55*85cm/25.6*21.7*33.5inch
The efficient air filter is not intended for sterile compounding applications
Typical applications for Portable Clean Room Hoods include tissue culturing, data recovery, compounding, medical applications like stem cell therapy practices, cleaning processes, and much more
It is widely used in medicine, pharmacy, biological & chemical experiment, electron, precise apparatus, instrument and so on
Description
Introduction
Air comes into plenum chamber through primary air filter at the top and centrifugal fan. Then air is blown out through high efficiency air filter from the top of the operation area. That will form high-degree clean vertical air curtain and remove natural air in working area. After five minutes, it will achieve a high-degree clean space. This equipment adopts adjustable fan to regulate air volume in double speed and touch switch adjusts the voltage. That will ensure that the wind speed of working area always in an ideal state
Parameters
Model: VD-650
Cleanliness: Class 100(Fed 209E)
No.of colony: Dish(90) H
Air velocity: 0.25-0.45m/s(Adjustable)
Noise: 62dB(A)
Half peak vibration: 0.5Um(x,y,z Direction)
Lllumniation: 300Lx
Power supply: AC 110V/60Hz
Maximum power: 200W
Weight: 50kg
Working dimensions: 19"x15"x18"/48.26X38.1X45.72cm
Overall dimension: 25"x20"x33"/63.5x50.8x83.82cm
For persons: Single /sided
Size&No. of HEPA: 18.8"X18"X1.5"/47.75x45.72x3.81cm
Size &No. of light or UV lamp: 10WX1/10WX1
2. Labconco 2246501 Basic 70 Fume Hood with Explosion Proof 3/4 hp Blower Module and Lamp, 220V, 50Hz, Fully Assembled
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior
Description
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cup sink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).3. Labconco 2246300 Basic Fume Hood, Epoxy-Coated Steel, 70" Width, 3/4 hp Blower, 115V, 60 Hz
Feature
Durable white epoxy-coated 16-gauge steel exterior and interiorRight side fixture panel factory-prepared to accept up to three service fixtures
One electrical duplex and one airflow monitor
Explosion proof light and blower that mounts on the top of the hood
Description
Labconco Basic Fume Hoods 70" are one of the best in the market, offering an array of selections for basic chemistry applications where safe ventilation is a must, including light-duty enclosure for nuisance vapors, hood systems for toxic fume ventilation, or a more specialized ventilation system. All basic laboratory hoods are constructed of epoxy-coated steel, and are sensible for all areas of worklaboratories with low ceilings or narrow aisles. They have smaller dimensions that are economical with a shorter height and depth than traditional hoods, so they fit in areas with low ceilings or narrow aisles.4. LABCONCO/BUCHLER 100500042 Protector Premier Laboratory Hood with Built-In Exhaust Blower, 2 Service Fixtures and 1 Electrical Duplex, 5' Nominal Width, 60" W x 31.7" D x 66" H
Feature
60" Width31.7" Depth
66" Height
5. Labconco 2246706 Basic 70 Fume Hood with Explosion Proof 3/4 HP Blower Module and Lamp, 220V, 50 Hz, Unassembled, 53" Height, 70" Width, 25" Length
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior
Description
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cupsink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).6. Labconco 2246500 Basic 70 Fume Hood with Explosion Proof 3/4 HP Blower Module & Lamp, 115/230V, 60 Hz, Fully Assembled
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior
Description
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cupsink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).7. Labconco 2246301 Basic Fume Hood, Epoxy-Coated Steel, 70" Width, 3/4 hp Blower, 220V, 50 Hz
Feature
Durable white epoxy-coated 16-gauge steel exterior and interiorRight side fixture panel factory-prepared to accept up to three service fixtures
One electrical duplex and one airflow monitor
Explosion proof light and blower that mounts on the top of the hood
Description
Labconco Basic Fume Hoods 70" are one of the best in the market, offering an array of selections for basic chemistry applications where safe ventilation is a must, including light-duty enclosure for nuisance vapors, hood systems for toxic fume ventilation, or a more specialized ventilation system. All basic laboratory hoods are constructed of epoxy-coated steel, and are sensible for all areas of worklaboratories with low ceilings or narrow aisles. They have smaller dimensions that are economical with a shorter height and depth than traditional hoods, so they fit in areas with low ceilings or narrow aisles.8. Labconco 2246704 Basic 70 Fume Hood with 3/4 HP Blower Module, Vapor-Proof Lamp, 220V, 50 Hz, Unassembled
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior
Description
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cupsink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).9. Labconco 2246703 Basic 70 Fume Hood with 3/4 HP Blower Module, Vapor-Proof Lamp, 115V, 60Hz, Unassembled, 25" Length, 70" Width, 53" Height
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior
Unit Count Type is Fume Hood
Made in :United States
Description
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cupsink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).10. Labconco 2246702 Basic 70 Fume Hood with Explosion-Proof Lamp, without Blower Module, 115/230, 50/60 Hz, Unassembled, 25" Length, 48" Height, 70" Wide
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior
Description
Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a vapor-proof 100-watt incandescent light, switches for light and blower. The right side panel is factory prepared for up to three service fixtures, one duplex receptacle and one airflow monitor (see ordering info below). The right interior wall is factory prepared for one cupsink and turret (see ordering info below). Requires work surface, base cabinet or stand, ductwork and remote blower (except for Hoods with Blower Modules).11. Labconco 2246701 Basic 70 Fume Hood with Vapor-Proof Lamp, without Blower Module, 220V, 50 Hz, Unassembled, 48" Height, 70" Wide, 25" Length
Feature
3/16" tempered safety glass counterbalanced sash10" diameter duct collar
Powder-coated 16 gauge steel liner and exterior