Finding the best miter bar 24 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Woodhaven 4902 24" Miter Gauge Fence & Flip Stop Kit
Feature
24" Miter Gauge Fence & Flip Stop KitIncludes 4424 24" Ultra Track, 4424F 24" x 3/4" thick Fence Face, 4824 24" Ruler Bar & Tape and a 4519 Flip Stop.
Miter Gauge Fence & Flip Stop Kit attaches directly to our 4910 & 4911 Miter Gauges. Also includes hardware & instructions to adpat to other miter gauges. Increases your Miter Gauges accuracy and efficiency.
Lifetime guarantee against defects in material or workmanship. Made in the USA!
Description
Woodhaven 4902 24" Miter Gauge Fence & Flip Stop Kit2. Forney 72358 Chop Saw Blade, Type 1 High Speed Masonry with 1-Inch Arbor, C24R-BF, 14-Inch-by-5/32-Inch
Feature
Silicon carbide and dual fiberglass reinforced for strength with masonry applicationsUsed primarily on ceramic, masonry, plastic and other non-ferrous materials
Quality made to provide fast, safe, dependable service
Designed to be used on stationary saw machines only
Description
The Forney 72358 14-Inch Type 1 Masonry Asphalt Cutting Wheel is silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Quality made to provide fast, safe, dependable service. Designed to be used on stationary saw machines only. 14-Inch (355.6 mm) by 5/32-Inch (3.96 mm) with 1-Inch (25.4 mm) arbor. C24R-BF with Max 5,400 RPM. Typical Spec Example A24R-BF: A=Used for Steel, 24=Grit (Coarse), R=Medium to Hard Bond. The First series of letters indicates Grain Type; A=Aluminum Oxide (Used in Metal Applications) C=Silicon Carbide (Used for Masonry Applications) ZA= Alumina Zirconium used for (Stainless Steel and Ferrous Metal Applications) TA=Ceramic Treated Aluminum Oxide (Used for Metal Applications) The Second series of letters indicates Grain Size or Grit; 8-24=Coarse, 30-60=Medium, 70-180=Fine and 220-Up=Hard. The Third series of letters indicates Bond Hardness; A-N=Soft, O-S=Medium and T-Z=Hard. The Fourth series of letters indicates type of Bond; BF=Retinoid Fiberglass Reinforced (Double Bonded), E=Shellac, R=Rubber and V=Vitrified. Wheel Types; Type 1=Flat Wheel for Cutting, Type 27=Depressed Center Wheel, Type 28=Hat Shaped for Grinding and Type 29=Flap Disc for Grinding and Finishing. Note: Harder Wheel have a longer life where a softer wheel will cut faster. Fine Grain=Long Life=Slower Cutting and Grinding. Coarse Grain=Short Life=Fast Cutting or Grinding. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.3. Forney 72379 Chop Saw Blade, Type 1 Metal with 1-Inch Arbor, A30O-BF, 14-Inch-by-1/8-Inch
Feature
Aluminum oxide metal cutting wheelDesigned for metal cutting, metal abrasion, body work, metal fabrication and general repair work
Used on ferrous materials
Designed to be used on chop saws only
Description
The Forney 72379 14-Inch Type 1 Steel Cutting Wheel is an aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on chop saws and hand held gas saws. 14-Inch (35.56 cm) by 1/8-Inch (3.18 mm) with 1-Inch (2.54 cm) arbor. A30O-BF with Max 4,400 RPM. Typical Spec Example A24R-BF: A=Used for Steel, 24=Grit (Coarse), R=Medium to Hard Bond. The First series of letters indicates Grain Type; A=Aluminum Oxide (Used in Metal Applications) C=Silicon Carbide (Used for Masonry Applications) ZA= Alumina Zirconium used for (Stainless Steel and Ferrous Metal Applications) TA=Ceramic Treated Aluminum Oxide (Used for Metal Applications) The Second series of letters indicates Grain Size or Grit; 8-24=Coarse, 30-60=Medium, 70-180=Fine and 220-Up=Hard. The Third series of letters indicates Bond Hardness; A-N=Soft, O-S=Medium and T-Z=Hard. The Fourth series of letters indicates type of Bond; BF=Retinoid Fiberglass Reinforced (Double Bonded), E=Shellac, R=Rubber and V=Vitrified. Wheel Types; Type 1=Flat Wheel for Cutting, Type 27=Depressed Center Wheel, Type 28=Hat Shaped for Grinding and Type 29=Flap Disc for Grinding and Finishing. Note: Harder Wheel have a longer life where a softer wheel will cut faster. Fine Grain=Long Life=Slower Cutting and Grinding. Coarse Grain=Short Life=Fast Cutting or Grinding. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.4. INCRA IMS2SE Steel Miter Slider SE 25.5-Inch (Special Edition)
Feature
Available in 2 sizes: 18" and 25.5"Super strong steel construction
Adjusts for a perfect glide in any standard 3/4" x 3/8" miter channel
Compatible with Build-It System panels or create your own custom jig designs
Description
The INCRA Miter Slider SE combines the versatility of the INCRA Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA miter gauges. Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot; choose standard aluminum Miter Slider for these applications. Steel bars are more rigid than wooden or plastic runners and are not susceptible to changes in humidity or temperature. Miter Slider SE bars have (4) #10-24 holes that mate with INCRA Build-It Panels. Miter Slider SE bars also have (3) 1/4"-20 holes along the length to accept knobs and other fasteners commonly used when building jigs and fixtures. Long-wearing Nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables and band saws. Nylon GlideLOCK adjusting discs give the bars a smooth, low-friction travel. Bars include removable T-slot retaining clips for BOTH ends of the bar for superior stability of larger jigs. Miter Slider SE is compatible with all INCRA Build-It Panels. Miter Slider SE fits square-sided 3/4" x 3/8" miter slots with or without T-slot bottom. GlideLOCK adjustment for slots measuring 0.740" to 0.765" in actual width.5. Forney 72352 Chop Saw Blade, Type 1 High Speed Metal with 1-Inch Arbor, A24R-BF, 12-Inch-by-5/32-Inch
Feature
Aluminum oxide metal cutting wheelDesigned for metal cutting, metal abrasion, body work, metal fabrication and general repair work
Used on ferrous materials
Designed to be used on chop saws only
Description
The Forney 72352 12-Inch Type 1 Steel Cutting Wheel is an aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on chop saws and hand held gas saws. 12-Inch (304.8 mm) by 5/32-Inch (3.96 mm) with 1-Inch (2.54 cm) arbor. A24R-BF with Max 6,360 RPM's. Typical Spec Example A24R-BF: A=Used for Steel, 24=Grit (Coarse), R=Medium to Hard Bond. The First series of letters indicates Grain Type; A=Aluminum Oxide (Used in Metal Applications) C=Silicon Carbide (Used for Masonry Applications) ZA= Alumina Zirconium used for (Stainless Steel and Ferrous Metal Applications) TA=Ceramic Treated Aluminum Oxide (Used for Metal Applications) The Second series of letters indicates Grain Size or Grit; 8-24=Coarse, 30-60=Medium, 70-180=Fine and 220-Up=Hard. The Third series of letters indicates Bond Hardness; A-N=Soft, O-S=Medium and T-Z=Hard. The Fourth series of letters indicates type of Bond; BF=Retinoid Fiberglass Reinforced (Double Bonded), E=Shellac, R=Rubber and V=Vitrified. Wheel Types; Type 1=Flat Wheel for Cutting, Type 27=Depressed Center Wheel, Type 28=Hat Shaped for Grinding and Type 29=Flap Disc for Grinding and Finishing. Note: Harder Wheel have a longer life where a softer wheel will cut faster. Fine Grain=Long Life=Slower Cutting and Grinding. Coarse Grain=Short Life=Fast Cutting or Grinding. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.6. POWERTEC 71035 Table Saw Taper Jig
Feature
Sturdy extruded aluminum guide bars; fully adjustableIncludes graduated scale measuring degrees and inches per foot of taper
Cut accurate tapers up to 3" per foot or Degree
Backside stop securely holds wood in Place
Dimensions: 2-1/2-inch wide x 24-inch long x 1-1/-inch 8 high; weighs 2 pounds
Description
This Taper jig can make cutting jobs easier, especially those that need to be Slightly angled and are too long for your miter or chop saw. Unbreakable metal hinge makes cutting easy. Graduated scale measures 15 degrees of Taper, or up to 3 inches per foot. Left or right-hand operation.7. Rockler 24" Aluminum Miter Bar
Description
Set up your jigs for smooth-sliding action on table saws, router tables, workbenches and more! These solid aluminum bars have nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Available individually in 18" or 24" lengths. Features: Great for shop-made cross-cut jigs, cut-off tables, taper jigs, and more Works on table saws, disc sanders, router tables, and more Aluminum won't warp, swell or shrink like wooden runners jigs fit perfectly time after time -20 threaded holes for easy attachment8. MLCS 9779 Router Table Cross Cut Sled
Feature
A stop block is included with the fenceAdjustable fence adjusts to angles up to 45-Degrees
Adjustable position miter bar to fit almost any router table with a standard miter slot
The 1-Inch wide center slot accommodates a wide variety of router bits
24-Inch by 30-Inch base made from 1-Inch thick melamine coated MDF
Description
Great for precision routing of dadoes or rabbets... up to 45 angles! Providing an economical and safer solution, the Router Table Crosscut Sled gives woodworkers an alternative to using a stacked dado blade set and miter gauge on table saws. When making book or display cases, louvered vents or any tricky angle cuts the Router Table Crosscut Sled can't be beat. A Stop Block is included. Adjustable Fence - up to 45. 24" x 30" base made from 1" thick melamine-coated MDF. Adjustable Position Miter Bar to fit almost any router table with a standard miter slot. 1" wide center slot accommodates a variety of router bits.9. Porter-Cable 823534 3 Pk Carbide Grit Discs 24 36 And 46 Grit
Feature
- One (1) 823932 6 Inch X 24 Grit Carbide Grit Disc
- One (1) 823534 6 Inch X 36 Grit Carbide Grit Disc
- One (1) 823917 6 Inch X 46 Grit Carbide Grit Disc
Description
- Contains 3 Carbide Grit Discs: 24, 36 And 46 Grit
- Fits Porter-Cable #7403 Paint Remover
- 6 Inch Diameter
- Reusable - Cleanable
- Soak Overnight In A Dish Of Paint Remover Then Rinse And Reuse
- Or Depending On The Types Of Paint, Use A Belt Cleaner To Clean The Disc
10. Forney 72354 Chop Saw Blade, Type 1 High Speed Masonry with 20-Millimeter Arbor, C24R-BF, 12-Inch-by-5/32-Inch
Feature
Silicon carbide and dual fiberglass reinforced for strength with masonry applicationsUsed primarily on ceramic, masonry, plastic and other non-ferrous materials
Quality made to provide fast, safe, dependable service
Designed to be used on stationary saw machines only
Description
The Forney 72354 12-Inch Type 1 Masonry Asphalt Cutting Wheel is silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Quality made to provide fast, safe, dependable service. Designed to be used on stationary saw machines only. 12-Inch (304.8 mm) by 5/32-Inch (3.96 mm) with 1-Inch (25.4 mm) arbor. C24R-BF with Max 6,360 RPM. Typical Spec Example A24R-BF: A=Used for Steel, 24=Grit (Coarse), R=Medium to Hard Bond. The First series of letters indicates Grain Type; A=Aluminum Oxide (Used in Metal Applications) C=Silicon Carbide (Used for Masonry Applications) ZA= Alumina Zirconium used for (Stainless Steel and Ferrous Metal Applications) TA=Ceramic Treated Aluminum Oxide (Used for Metal Applications) The Second series of letters indicates Grain Size or Grit; 8-24=Coarse, 30-60=Medium, 70-180=Fine and 220-Up=Hard. The Third series of letters indicates Bond Hardness; A-N=Soft, O-S=Medium and T-Z=Hard. The Fourth series of letters indicates type of Bond; BF=Retinoid Fiberglass Reinforced (Double Bonded), E=Shellac, R=Rubber and V=Vitrified. Wheel Types; Type 1=Flat Wheel for Cutting, Type 27=Depressed Center Wheel, Type 28=Hat Shaped for Grinding and Type 29=Flap Disc for Grinding and Finishing. Note: Harder Wheel have a longer life where a softer wheel will cut faster. Fine Grain=Long Life=Slower Cutting and Grinding. Coarse Grain=Short Life=Fast Cutting or Grinding. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.11. Forney 72353 Chop Saw Blade, Type 1 High Speed Masonry with 20-Millimeter Arbor, C24R-BF, 12-Inch-by-5/32-Inch
Feature
Silicon carbide and dual fiberglass reinforced for strength with masonry applicationsUsed primarily on ceramic, masonry, plastic and other non-ferrous materials
Quality made to provide fast, safe, dependable service
Designed to be used on stationary saw machines only