Where to find f4 stm32f405?

When you want to find f4 stm32f405, you may need to consider between many choices. Finding the best f4 stm32f405 is not an easy task. In this post, we create a very short list about top 9 the best f4 stm32f405 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 f4 stm32f405:

Product Features Editor's score Go to site
DALRC F405 AIO Betaflight F4 Flight Controller MCU STM32F405 MPU6000 OSD 9V/1.5A 5V/2A BEC 200A PDB DALRC F405 AIO Betaflight F4 Flight Controller MCU STM32F405 MPU6000 OSD 9V/1.5A 5V/2A BEC 200A PDB
Go to amazon.com
Holybro Kakute | F4 V2 STM32F405 Flight Controller With Betaflight OSD for RC Multirotor FPV Racing Drone Holybro Kakute | F4 V2 STM32F405 Flight Controller With Betaflight OSD for RC Multirotor FPV Racing Drone
Go to amazon.com
Crazepony Flight Controller SpeedyBee F4 AIO Flight Controller Betaflight Integrated OSD PDB LC Filter for FPV RC Drone Quadcopter, Setting FC Parameters via Mobile Device Crazepony Flight Controller SpeedyBee F4 AIO Flight Controller Betaflight Integrated OSD PDB LC Filter for FPV RC Drone Quadcopter, Setting FC Parameters via Mobile Device
Go to amazon.com
XCSOURCE Betaflight F4 Flight Controller STM32 Built-in OSD BEC Power Module for Mini Racing Drone RC566 XCSOURCE Betaflight F4 Flight Controller STM32 Built-in OSD BEC Power Module for Mini Racing Drone RC566
Go to amazon.com
SpeedyBee F4 AIO Flight Controller STM32F405 OSD Built-in Bluetooth Chip Supported Setting FC parameters via iOS and Android SpeedyBee F4 AIO Flight Controller STM32F405 OSD Built-in Bluetooth Chip Supported Setting FC parameters via iOS and Android
Go to amazon.com
MagiDeal Betaflight F4 Pro V3 STM32F405 MCU Flight Controller 30.5x30.5mm Built-in 5V 3A MagiDeal Betaflight F4 Pro V3 STM32F405 MCU Flight Controller 30.5x30.5mm Built-in 5V 3A
Go to amazon.com
30.5x30.5mm Omnibus F4 Controller AIO Betaflight OSD 5V BEC and Current Sensor - RC Toys & Hobbies Multi Rotor Parts - 1x Omnibus F4 Flight Controller, 4x Anti-vibration Rubber Shock 30.5x30.5mm Omnibus F4 Controller AIO Betaflight OSD 5V BEC and Current Sensor - RC Toys & Hobbies Multi Rotor Parts - 1x Omnibus F4 Flight Controller, 4x Anti-vibration Rubber Shock
Go to amazon.com
HITSAN F4 FLAME Race Spec STM32F405 Flight Controller Built-in BETAFLIGHT OSD 5V BEC PDB Current Sensor for RC Drone One Piece HITSAN F4 FLAME Race Spec STM32F405 Flight Controller Built-in BETAFLIGHT OSD 5V BEC PDB Current Sensor for RC Drone One Piece
Go to amazon.com
Matek F405-WING Flight Controller F4 FC Built-in OSD BEC Current Sensor on Board for RC FPV Racing Drone Matek F405-WING Flight Controller F4 FC Built-in OSD BEC Current Sensor on Board for RC FPV Racing Drone
Go to amazon.com
Related posts:

Reviews

1. DALRC F405 AIO Betaflight F4 Flight Controller MCU STM32F405 MPU6000 OSD 9V/1.5A 5V/2A BEC 200A PDB

Description

DALRC F405 AIO Betaflight F4 Flight Controller MCU STM32F405 MPU6000 OSD 9V/1.5A 5V/2A BEC 200A PDB

Specification:

Brand name: DALRC

Item name: F405 AIO flight controller

Flight controller firmware: Betaflight DALRCF405

MCU: STM32F405RGT6

BEC: 9V/3A

Gyro: MPU6000 or ICM20689

Flash: 16MB

OSD: Support

Size: 40*40mm

Hole to hole distance: 30.5*30.5 4mm

Weight: 10g

Package Included:

1 x F405 AIO Flight Controller Board

4 x Silicon damper ball

2. Holybro Kakute | F4 V2 STM32F405 Flight Controller With Betaflight OSD for RC Multirotor FPV Racing Drone

Feature

-Additional UART (UART 4) added to support serial camera communication such as to RunCam Split. Please note this is NOT the same as Betaflight Camera Control feature, which controls the menu of FPV cameras like Swift, etc.
-Additional UART (UART 5) added to support ESC telemetry such as from BLHeli_32 and KISS.
-Through-hole solder pads instead of flat pads for more secure soldering especially for beginners.
-Barometer sensor on board allows altitude hold mode. -I2C pad available for certain external sensors.
Package included: 1* F4 V2 flight controller 2* foam 1* FFC

Description

Features:
-Supports Betaflight and Cleanflight.
-Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
-Soft-mounting built in. The IMU ("gyro") chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.
-New high-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.
-2 oz. copper PCB allows up to 120A maximum continuous current.
-Dedicated bootloader button for easy firmware flashing.
-Low-profile design fits into even very compact frames.
-Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on "B+" pad only).
-Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 AIO monitors voltage directly from the battery power lead.
-Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 1.5 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
-Supports BLHeli pass-through for easy ESC upgrade and configuration.

Specification:
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 (SPI)
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5 hardware UARTS (UART1,3,4, 5, 6)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
128 Mbit Dataflash chip for Blackbox logging
Dimensions: 35x30x8mm (includes USB in height) Mounting Holes: Standard 30.5mm square to center of holes
Weight: 7g

3. Crazepony Flight Controller SpeedyBee F4 AIO Flight Controller Betaflight Integrated OSD PDB LC Filter for FPV RC Drone Quadcopter, Setting FC Parameters via Mobile Device

Feature

Integrated 0 configuration: BLE Module Integrated 0 configuration,setting the FC parameters via mobile device.iOS 10.0+iPhone4S, iPad 3rd Gen. Android 4.3+: Google Play.
Built-in LC Filter: All 5V/9V Output with LC Fliter. Reducing noise,more clear image to display,capture wonderful fpv moments.
Distribution Board: PDB integrated for powering external devices.1*3.3V/1*4.5V/3*5.0V/1*9.0V Output.Direct power to the ESCs.
Support OSD: Adjust color, mode ect,achieve the best use effect,easy to adjust and to solve moire problem.
Built-in Bluetooth Chip: Zero configuration,connect to the SpeedyBee APP directly after powering on,easy to set the FC parameters.

Description

SpeedyBee F4 AIO Flight Controller

MCU: STM32F405(Much better than STM32F1 and F3)
IMU: MPU6000 (Gyroscope More stable)
OSD: BetaFlight OSD w/ AT7456E chip
BLE Module: Inner connect to UART5 for remote setting with SpeedyBee App or other similar apps
BlackBox: 2MB onboard dataflash
Current Sensor: 200A(Scale 302)
Power input: 3s - 6s Lipo
Power output: 4.5V * 1 , 3.3V * 1, 5V * 3 , 9V * 1
Cam And VTX power output: Built-in LC-Filter for 5V and 9V
ESC power output: 4 * VCC output
UART: UART Pads * 3(UART1, UART3, UART4)
UART2 for Receiver: Built in inverter of RX2 for SBUS input through SBUS pad, RX2 pad used for PPM, DSM2, DSMX, IBUS
RSSI input: RSSI input solder pad
I2C: Used for external GPS, Barometer module
Buzzer: Buz- and 5V pad used for 5V Buzzer
ESC signal: s1 - s7
LED pin: Used for WS2812 LED
Boot button: Used to easy enter DFU mode
Weight: 8.8g/0.02lb
Dimension: 36*39*7mm/14.17*15.35/2.76in
Package Including
1 * SpeedyBee F4 AIO Flight controller
6 * M3*3+3 Nylon column
6 * M3 Nylon nut
6 * M3 Anti-vibration Gasket
1 * Rubycon 35V 470uf capacitor
1 * Manual

4. XCSOURCE Betaflight F4 Flight Controller STM32 Built-in OSD BEC Power Module for Mini Racing Drone RC566

Feature

STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.
SBUS/PPM input (Pinheaders)
6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)

Description

Features:
STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.
SBUS/PPM input (Pinheaders)
6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
SPI Sensor MPU6000
Included 128Mbit Flash, please always use BEC for the FC.
Supported Betaflight and Dronin.
Dimension: 36 x 36mm
Setup hole dimension: 30.5 x 30.5mm

Package includes:
1 x Flight Controller

5. SpeedyBee F4 AIO Flight Controller STM32F405 OSD Built-in Bluetooth Chip Supported Setting FC parameters via iOS and Android

Feature

SpeedyBee F4 AIO Flight Controller: BLE Module Integrated 0 configuration. Setting the FC parameters via mobile device. (iOS 10.0+, Android 4.3+)
Built-in Bluetooth Chip: Zero configuration, connect to the SpeedyBee APP directly after powering on, easy to set the FC parameter. Support BetaFlight OSD .
MCU: STM32F405, Much better than STM32F1 and F3. MPU6000 Gyroscope More stable
Built-in LC Filter, Clear image, Reduce noise. All 5V/9V Output with LC Fliter.
PDB integrated for powering external devices, Direct power to the ESCs. Power input 3s-6s Lipo Power.

Description

Specifications

  • MCU: STM32F405
  • IMU: MPU6000
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BLE Module: Inner connect to UART5 for remote setting with SpeedyBee App or other similar apps
  • BlackBox: 2MB onboard dataflash
  • Current Sensor: 200A(Scale 302)
  • Power input: 3s - 6s Lipo
  • Power output: 4.5V * 1 , 3.3V * 1, 5V * 3 , 9V * 1
  • Cam And VTX power output: Built-in LC-Filter for 5V and 9V
  • ESC power output: 4 * VCC output
  • UART: UART Pads * 3(UART1, UART3, UART4)
  • UART2 for Receiver: Built in inverter of RX2 for SBUS input through SBUS pad, RX2 pad used for PPM, DSM2, DSMX, IBUS
  • RSSI input: RSSI input solder pad
  • I2C: Used for external GPS, Barometer module
  • Buzzer: Buz- and 5V pad used for 5V Buzzer
  • ESC signal: s1 - s7
  • LED pin: Used for WS2812 LED
  • Boot button: Used to easy enter DFU mode
  • Weight: 8.8g
  • Dimension: 36*39*7mm

Package

  • 1* SpeedyBee F4 AIO Flight controller
  • 6* M3*3+3 Nylon column
  • 6* M3 Nylon nut
  • 6* M3 Anti-vibration Gasket
  • 1* Rubycon 35V 470uf capacitor
  • 1* Manual

6. MagiDeal Betaflight F4 Pro V3 STM32F405 MCU Flight Controller 30.5x30.5mm Built-in 5V 3A

Feature

100% Brand new and high quality
Item name: Omnibus F4 Pro V3 Flight Controller
Product Size: 36 x 36mm
Mount Holes: 30.5 x 30.5mm
Material: Electrical Components

Description

Description:

- 100% Brand new and high quality

- Item name: Omnibus F4 Pro V3 Flight Controller

- Product Size: 36 x 36mm

- Mount Holes: 30.5 x 30.5mm

- Material: Electrical Components

Specification:

- STM32 F405 MCU

- Built-in Current/Voltage sensor( (0m50 sensor can handle up to 200A)

- Dshot support

- Drag and Drop OSD configured via Betaflight Configurator

- Smartaudio v2 support - Tune your PID's and configure the omnibus F C from your Transmitter

- MPU6000 6 axis SPI Gyro & Accelerometer

- SBUS/PPM AND Spketrum dsm-x Ports

- MicroSD card blackbox

- Baro(BMP280)

- 5v3a SBEC

- On-board Video Filter(only can supply 5V to VTX and Camera)

- SmartAudio V2 via tx6 on J10

- 43 pin ESC pin layout

- IR pins for lap timing transponder

- Firmware is betaflight_3.1.7_OMNIBUSF4SD

Package Includes:

1 Piece Omnibus F4 Pro V3 Flight Controller

7. 30.5x30.5mm Omnibus F4 Controller AIO Betaflight OSD 5V BEC and Current Sensor - RC Toys & Hobbies Multi Rotor Parts - 1x Omnibus F4 Flight Controller, 4x Anti-vibration Rubber Shock

Feature

RC Toys & Hobbies Multi Rotor Parts - Item Name: Omnibus F4 Controller
MCU: STM32F405 , GRT6, 8K
Sensor:MPU6000
Input Voltage: 2-6S Lipo
30.5x30.5mm Omnibus F4 Controller AIO Betaflight OSD 5V BEC and Current Sensor - RC Toys & Hobbies Multi Rotor Parts - 1x Omnibus F4 Flight Controller, 4x Anti-vibration Rubber Shock

Description

30.5x30.5mm Omnibus F4 Controller AIO Betaflight OSD 5V BEC and Current Sensor - RC Toys & Hobbies Multi Rotor Parts - 1x Omnibus F4 Flight Controller, 4x Anti-vibration Rubber Shock Bal
30.5x30.5mm Omnibus F4 Controller AIO Betaflight OSD 5V BEC and Current Sensor for RC Drone Specification:
Item Name: Omnibus F4 Controller
MCU: STM32F405 , GRT6, 8K
Sensor:MPU6000
Input Voltage: 2-6S Lipo
- BEC Output: 5V 3A
- Integrated with OSD, support BF Ground Station adjust OSD
- Built-in Current Sensor, can monitor current
- Without Blackbox
Fimware out from factory: betaflihgt_3.2.0_OMNIBUSF4OSD
Receiver: Support PPM, SBUS, IBUS, DSM2/ DSMX Receiver
Size: 42x36mm
Mounting Hole: 30.5x30.5mm
Weight: 9.4g
Instruction for diagram pciture:
1. M1-M4 : ESC Power Cable
2. V+ V-: ESC's "+" "-"
3. BOOT button: to flash firmware
4. +5V: output 3A, can connect VTX, Camera and receiver
5. RX6 (S): Connect SBUS Receiver
6. RX1 (D): ConnectDSM2/DSMX/IBUS Receiver
7. PPM: Connect PPM Receiver
8. RX3 , TX3: Series UART 3
9. Buz+ Buz- : Possitive Buzzer "+" and "-"
Package included:
1x Omnibus F4 Controller
4xAnti-vibration Rubber Shock Balls

8. HITSAN F4 FLAME Race Spec STM32F405 Flight Controller Built-in BETAFLIGHT OSD 5V BEC PDB Current Sensor for RC Drone One Piece

Feature

Toys hobbies and robot
Rc toys & hobbies>multi rotor parts
No returns or no refunds after 10days except damage and defective case
No cancellation after dispatch

Description

Stm32f405 f4 flight controller built-in betaflight osd 5vbec pdb current sensor description: item name: stm32f405 f4 flight controlweight: 11gsize: 36*36mmboard thickness: 1.2mmcopper foil: 3oz*6layer 18ozcurrent: max 300a+lipo: 2-6smounting hole: m3 30.5*30.5mmfeatures: -stm32f405 mcu, 8k-mpu6000 spi bus-built-in betaflight osd, pid tuning-built-in 5v/3a bec-built-in current sensor-directly weld pdb-16m flash-support receiver sbus, ppm, dsmx. ..-with buzzer, led program, voltage monitor, blheli-s esc program-the back have 90+ cap, prevent the counter emf of motor and make the image more clearpackage included: 1* f4 flight controller

9. Matek F405-WING Flight Controller F4 FC Built-in OSD BEC Current Sensor on Board for RC FPV Racing Drone

Feature

Matek Flight Controller F405-WING : Upgraded Flight Controller,it is designed specially for fixed wing.,with 4x BEC current sensor on board.
Current Senor: 104A, 3.3V ADC, Scale 317,Mounting: 30.5 x 30.5mm, 4mm with Grommets 3mm.
4x BEC on board:2x Motors, 7x Servos outputs , 2x I2C , 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
MCU: 168MHz STM32F405 , IMU: MPU6000 accelerometer/gyro (SPI) , Baro: BMP280 (I2C) , OSD: INAV OSD w/ AT7456E chip , Blackbox: MicroSD card slot (SD/SDHC).
Much more details, pls click here:http://www.mateksys.com/?portfolio=f405-wingtab-id-2

Description


FC
MCU: 168MHz STM32F405
IMU: MPU6000 accelerometer/gyro (SPI)
Baro: BMP280 (I2C)
OSD: INAV OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP andamp; 6x UARTs
2x Motors, 7x Servos outputs
2x I2C
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2 pad
Battery Voltage Sensor: 1:10 (Scale 1100)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
FC Firmware

INAV Flight
Target: MATEKF405SE

PDB
Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
2x ESC power pads
Current Senor: 104A, 3.3V ADC, Scale 317

BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A

BEC 9V /12V output
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad

BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.6A
Output Ripple: 50mV (VIn=24V, VOut=5V5A load)

BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 500mA

Physical
Mounting: 30.5 x 30.5mm, 4mm with Grommets 3mm
Dimensions: 56 x 36 x 13 mm
Weight: 25g


Package Including
1 * Matek F4 Flight Controller Built-in OSD

Conclusion

All above are our suggestions for f4 stm32f405. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using f4 stm32f405 with us by comment in this post. Thank you!