If you looking for mk3 heatbed then you are right place. We are searching for the best mk3 heatbed on the market and analyze these products to provide you the best choice.
Reviews
1. Anycubic 43188-247109 Ultra Base 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa I3 220x220mm
Feature
Excellent adhesion: ultra base covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large modelsUltra base integrated with heated bed: super flatness, fast and uniform heating
Durable: the special coating is inorganic and has a hardness of 8 mohs, and it is capable to work at 400
Easy to clean: ultra base is easy to clean by alcohol/water
Compatibility: compatible with all the cartesian style 3D printer with a Mk3 heated bed. Upgrade your printer with ultra base! you can get full support from the manual and video
Description
What printing experience was brought by Ultra base? Watch the video to find What has been bought to us by Ultra base. How to assemble the Ultra base platform: Ultra base has the same installation holes (209*209mm) as the standard MK2 and MK3 hot bed, and it's compatible with almost all 3D printers with MK2 and MK3 hot bed. Just peel off the blue tape on the backside, and then fit the Ultra base to the hotbed (base). for assembly video Attention: * Suggested bed temperature may vary depends on the filament material; * Please properly level the bed before printing; * Never let the nozzle rub against the Ultra base directly; * Clean the platform surface with alcohol/water. Temperature settings for different filaments: 1. PLA:50-70 2. Flexible filament: 50-70 3. ABS:100-125 ( 110 is recommended ) 4. PC:100-130 ( 120 is recommended ) 5. Nelon:90-120 ( 110 is recommended ) 6. PP:100-130 ( 120 is recommended ) 7. PETG: 50-70 Ultra base Specification: 1. Material : Special Glass + microporous coatings + Heat bed 2. Item size : 220*220*5.5mm 3. N.W :750g 4. G.W :870g 5. Box size : 26.5cm*26.5cm*5.5cm Heat bed Specification: (1)Material: Aluminum base (2)Voltage: 12V/24V (3)Max Temperature:120 Degree Celsius (4)Dimensions:220mmx220mm (5)Thickness: heat bed 1.5mm (6)Resistance around 0.9 ohm for 12V (7)Resistance around 3.6 ohm for 24V (8)100 Degree Celsius suggested for both 12V and 24V Package List: 1x ANYCUBIC Ultra base 3D Printer Platform with Ultra base heat bed 4* M3X35 Screws 4*M3 nuts 4* spacers.2. BIQU Aluminum MK3 12V Heatbed Platform 220x220x3mm PCB Hot Plate with Cable Line for Reprap 3D Printer
Feature
Dual power supply, operate at 12V, you can use thinner wires when operating at 24VA central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole
Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted
With 15V on the 12V terminals will maintain approx
115 degree Celsius without regulation
3. SainSmart RepRap MK2B 3D printers Dual Power PCB HeatBed Heat Bed 12/24V Updated Version of MK2A
Feature
SainSmart Product2 layer with 35m copper
copper plated holes
Power Input: 12V or 24v
Good resistance performance
Description
SainSmart MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants.
Specifications:
Color: Black
Etching: 35um copper
Dimensions 214mmx 214mm
Laminate FR4 1.6+-0.15mm
2 layer, 35m copper
Red Soldermask - both sides
White Silkscreen - both sides
Power Input: 12V or 24v
copper plated holes
resistance between 1.0 and 1.2 ohm
Further changes:
* A mounting hole in the middle of one edge to allow for easier bed leveling thanks to Nophead for this suggestion.
* Larger LED and Resistor pads to allow for 1206 size surface mount components.
* Much larger area to solder the current carrying wire, easily connect ribbon cable (such as with the Mendel90 headbed connection). Also the through holes increased in size.
* The redundant pads on the non-heating element side of the board removed to prevent confusion. These are not electrically connected if the board is not plated (plated boards are bad for the reasons outlined by Josef Prusa above).
SainSmart 3D Printer Filament
* SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU and Wood 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.
4. 220mm x 220mm Borosilicate Glass and MK3 Aluminum Heated Bed DIY Kit Bundle
Feature
1 Piece of 220mm x 220mm x 3mm Borosilicate Glass, Flat Polished Edge for safe to handle1 Piece of 220mm x 220mm x 3mm MK3 Aluminum Heated Bed
1 Piece of NTC 100K Sensor
1 Piece of R/B Cable
Designed by GO-3D Print in California
Description
Package include: 1 Piece of 220mm x 220mm x 3mm Borosilicate Glass 1 Piece of 220mm x 220mm x 3mm MK3 Aluminum Heated Bed 1 Piece of NTC 100K Sensor 1 Piece of R/B Cable Product Description Borosilicate Glass: Size: 220mm x 220mm +/- 1mm Thickness: 3mm Warp tolerance: +/-0.2mm Low expansion borosilicate glass. Can handle continuous use at 350 degrees F Extremely durable Low coefficient of thermal expansion Perfectly flat surface, perfect for printing Flat Polished Edge for safe to handle MK3 Aluminum Heated Bed: Size: 220mm x 220mm Thickness: 3mm 1 layer 35m (1oz base) copper Resistance between 1.4 and 1.6 ohm for the 12V Resistance between 5.0 and 5.4 ohm for the 24V For both 12V or 24V (please read connected instruction on the heated bed) 180 degree Celsius max. temperature.5. HICTOP 3MM MK3 Aluminum Heated Bed Hot Bed PCB Heatbed Platform for Reprap 3D Printer 200W 12V + Wiring
Feature
No soldering required, safe and convenientAluminum plate
Dimensions: 275mm x 220mm x 3mm
Power wiring is included in the kit
Compatible with most Prusa i3 variations of 12V power supply, we have 24V bed listing for 24V power supply as well.
Description
This heated bed works as heat producer, heat spreader and print surface.Specifications:
Dimensions: 275mm x 200mm x 3mm
Mounting hole diameter: 3.5mm
Material: Aluminum 3mm thick
Voltage: 12V
Package contents:
1 x MK3 275x220mm Aluminum Heated Bed
1 set of Power wires (3-color composed)
6. Aluminum Board - SODIAL(R)MK3 DualPower Aluminum Board PCB Heat Bed Heatbed RepRap Mendel Prusa 3D Printer
Feature
1 layer 35m copper;Voltage: 12/24V;Resistance: 1.4-1.6 Ohm at 12V5.0-5.4 Ohm at 24V;Max. Temp: 180 Celsius
Heating Time: 24V reaches 100 Celsius in 2 minutes
Dimensions: 214 x 214 x 3mm;Weight: 363g
Colour: Black with White Mask /Text
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings. Our products will enhance your experience to unparalleled inspiration.SODIAL(R)MK3 DualPower Aluminum Board PCB Heat Bed Heatbed RepRap Mendel Prusa 3D Printer
MK3 can choose 12 v and 24 v two voltage,
12 v :one line thread cross 1, another cross 2, 3
24 v :one line thread cross 2, another cross 3 (1 don't need to pick up).
The new circuit, whether meet the 12 v or 24 v, the power is stable.
package include:1 x Printer Heatbed
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.
7. 3D Printer Aluminum Heated Bed Build Plate,Aluminum Plate for heatbed MK2 of 3D Printer,220X220X2mm
Feature
Thick 2mm plate maintains flatness across whole area.Scratch resistant anodized surface.
Hidden countersunk mounting screws.
Material: Aluminum
size: 220mm x 220mm x 2mm
Description
Features1.3D printer thermal bed aluminum, positive and negative have been completed drilling, the thickness is 2mm, more balanced thermal conductivity
2.Hidden countersunk mounting screws.
3.The Aluminium Bed Mount Plate design is pre-drilled and tapped to mount boltable bushings, the PCB heated print bed, belt standoffs, belt clamps.
4.Scratch resistant anodized surface.
5.Aluminum plate for heatbed MK2/MK2A of 3D printer
Specifications
Material: Aluminum
Color:Silver
size: 220mm x 220mm x 2mm
Package Including
1 x Aluminum Heated Bed Build Plate
8. HICTOP 275 x 220mm MK3 Aluminum Heated Bed Hot Bed PCB Heatbed Platform for Reprap 3D Printer 250W 24V + Wiring
Feature
No soldering required, safe and convenientDimensions: 275mm x 220mm x 3mm
24V wire configuration; Long wire leads ( 21")
Easy to install on arrival
Compatible with most Prusa i3 variations of 24V power supply, we have 12V bed listing for 12V power supply as well.
Description
This heated bed works as heat producer, heat spreader and print surface.Specifications:
Dimensions: 275mm x 200mm x 3mm
Mounting hole diameter: 3.5mm
Material: Aluminum 3mm thick
Voltage: 24V
Package contents:
1 x MK3 275x220mm Aluminum Heated Bed
1 set of Power wires (3-color composed)