When you looking for machinist vise jaws, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable machinist vise jaws is not an easy task. In this post, we show you how to find the right machinist vise jaws along with our top-rated reviews. Please check out our suggestions to find the best machinist vise jaws for you.
Reviews
1. Precision 2-3/8'' Toolmaker Vise Machinist Tookmaking Clamp Vice Replacement Jaw
Feature
2-3/8'' toolmaker viseJaw width: 2-3/8'' ; Jaw depth: 1-1/4'' ; Jaw open (max opening): 3-3/8''
Has ground "V" way ; Clamping slot and 3/8'' hole in base ; Detachable replacement jaws
Unit overall dimension (fully open): 2-3/8''L x 13''W x 2-1/2''H ; Unit weight: 7.75 LBS
Quantity: 1 set
2. Yost Vises 104 4" Machinist Vise with Stationary Base, Made in US
Feature
Bench-mount machinist vise with stationary base, 4" nominal jaw width, and extra-large jaw opening and throat depth provides clamping action for heavy-duty applicationsFlat, stationary base provides a firm, even foundation when mounted
Ductile iron body is durable and strong for extended life
Jaws are grooved for enhanced grip and can be replaced when worn
Meets Fed. Spec. GGG-V-410B Type VI Class 1 specifications and is made in USA
Description
The Yost Vises 104 4" machinist vise with stationary base has an extra-large jaw opening and throat depth, mounts to a workbench to provide clamping action for heavy-duty applications, Federal Specification GGG-V-410B Type VI Class 1, and is made in USA. The stationary base has been machined flat to create a firm foundation for the vise when mounted. The ductile iron body is durable and strong for extended life. The hardened-steel jaws have grooves for enhanced grip and can be replaced when worn. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise.
The main screw that controls the jaws has been continuous rolled for high strength. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The base has two 33/64"-diameter holes for mounting hardware (not included).
| Specifications | |
|---|---|
| Jaw width (nominal) | 4" |
| Jaw opening (nominal) | 6.5" |
| Throat depth (nominal) | 4" |
| Pipe capacity | Not Applicable |
| Overall dimensions* | 8.5 x 6 x 17 inches (H x W x D) |
| Weight | 48 lb. |
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece.
Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
3. Wilton 10026 500S 5-Inch Jaw Width by 8-Inch Opening Machinist Swivel Base Vise
Feature
Jaw width: 5"Jaw opening: 8"
Throat depth: 4-1/2"
95 pounds
Description
Proudly made in the USA, the Machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed Spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The Machinist vise is equipped with main jaws and a machined anvil work surface.4. Vise Jaws - Nylon, Multipurpose - Use on Any Metal Vise, Magnetic Reversible Pads, Clamps Flat or Round Products - Available in 4" or 6" (2 Sets in 1)
Feature
NYLON 4" Jaws will protect and hold any delicate product Flat or round on any Vise or Drill pressThey can be used on both faces of each jaw to Grip round tube or threaded part or any flat material
The DESIGN makes them unique for Gunsmith, hobby, workbench, toolmaker non-marring - AUSTRALIAN MADE
One side Flat, one side multi-groove, Prismatic, v-pads, protector for Barrels, woodwork, mechanics
DISCOUNT WHEN YOU BUY 2, 100% money back warranty if for any reason you are not satisfied
Description
4" VISE JAWS that work on any Metal Vise. Protect your working piece Flat or Round from the Metal on your Vise.They Will not Discolour or leave any marks on your Working piece, with 8 strong rear earth magnets per set, they will stay put on your metal vise.
The Unique Multipurpose DESIGN allows you to TURN them OVER for use on the Flat or Grooved side. Applications commonly used in. Gunsmithing, Engineering, Automotive, Carpentry, jewellery, Golf, Bicycle, Toolmaking, Fishing, Locksmith
AN fitting, Plumbing.
What you can expect from our NYLON VISE JAWS. Complete satisfaction and Knowledge That this product will last a life time and you will never have to buy another.
We pride ourselves in research and test our products to provide a quality Tool from the best available materials.
AUSTRALIAN Made from Recycled Nylon that keeps the Environment in Mind
Certification complies with requirements of relevant USA standards. KIU products are backed by a Full 100% Replacement or Money Back Guarantee. For The BEST quality Multipurpose VISE JAWS click the Add to Cart button at the top of this page.
5. Vise Jaws / Vise Pads (Magnetic Multi-Groove Soft Jaws) - 4.5 Inch Length, TPU Jaw Covers - Fit Wide Array of Vises / Vices and Vise Blocks
Feature
PERFECT FOR A VARIETY OF MATERIALS: Our magnetic vise jaws / vise pads are ideal for holding wood, metal, plastic, tubing, threaded items, etc. - nearly anything round, flat or irregular. Our jaw covers are useful for jewelry making or gunsmithingHIGHLY COMPATIBLE: Our soft jaws are highly compatible w/ a wide variety of vises, tools and uses, including vise block, drill press vise, brass hammer, clamps, bench vise, mill clamps, etc. They're great mill accessories and drill press accessories
BUILT TO LAST AND BUILT TO PROTECT: Made from high-quality thermoplastic polyurethane (TPU), our soft vise jaws / vice jaws are hard enough to hold items in place but soft enough to protect finished, anodized or delicate surfaces from damage
UNIQUE MULTI-GROOVE DESIGN: Multi-groove design provides a number highly useful holding slots to keep items in place. 90 degree angles for widths of approximately 1/16", 1/8", 1/4" and 3/4". 60 degree angle for width of approximately 13/32"
MAGNETIC INSERTS FOR BROAD COMPATIBILITY: Strong embedded magnets keep vice jaws / vice jaw pads securely in place. 4.5-inch length provides compatibility with vises of various sizes. Product includes one set of vise jaw pads (2 pads)
Description
Our magnetic vise jaws pads / inserts are ideal for holding wood, metal, plastic, tubing, threaded items, and virtually anything else in your vise, round, flat or irregular. Vise pads are a very useful addition to a set of jeweler tools, machinist tools, and gunsmith tools / gunsmithing tools. Great for those looking for pipe clamps. Made from high-quality thermoplastic polyurethane (TPU), our inserts are hard enough to hold items in place but soft enough to protect finished, anodized or delicate surfaces from scratching, damage or marring. TPU resists oil, grease and abrasion and generally perform better than rubber jaws. TPU soft jaws are useful for a wide array of projects. The multi-groove design of our clamps provides a number highly useful holding slots to keep items in place. Our vise grips have 90 degree angles for widths of approximately 1/16", 1/8", 1/4" and 3/4". 60 degree angle for width of approximately 13/32". Strong embedded magnets keep vice jaws / vice jaw pads securely in place. 4.5-inch length provides compatibility with vises of various sizes (better to have vise jaws too short than too long). Product includes one set of vise jaw pads (2 pads). Compatible with a wide array of vise styles, including bench vise / bench vice, drill press vise / drill vise, mill vise / milling vise, machinist, table, woodworking and shop.6. Yost Vises 750-DI 5" Heavy-Duty Multi-Jaw Rotating Combination Pipe and Bench Vise with 360-Degree Swivel Base and Head
Feature
Multi-jaw bench vise with swivel base and head has top jaws, pipe jaws, and V-jaws to provide clamping action for heavy-duty applicationsVise head rotates 360 degrees with 12 locking positions to provide access to the three jaw sets and adjust them for proper placement
360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place
Ductile iron body is durable and strong for extended life and has a flat portion that acts as an anvil and additional work surface.Three sets of replaceable hardened steel jaws are affixed to the vise: one set of parallel serrated top jaws, one set of serrated pipe jaws, and one set of smooth V-jaws for round and flat stock
Pipe capacity(inches):0.125 to 3.5
Description
The Yost 750-DI weighs up to 50% more than the competition. The ductile iron body is 2X stronger than cast iron Vises. Extreme Grip Machinist Jaws feature deeper serrations to grip parts better. Self Align Pipe Jaws conform to the part they are gripping, reducing marring and increasing clamping pressure. The 360 degree Gear Lock Swivel Base prevents the Vise from turning once it is locked down. The Quick Action Pull pin allows you to rotate the Vise quickly and easily. There are twelve different locking positions. This Vise also features a reinforced anvil and 4 mounting tabs to securely attach it to the work Bench.7. Performance Tool MV6 Hammer Tough 6-Inch Machinist Vise
Feature
Heavy duty cast iron constructionDual lock downs for easy positioning
Diamond serrated jaws for secure grip
180 Degree swivel base
Description
Performance Tool 6" Steel Bench Vise part number MV-6.
- 360 swivel with dual lock-downs
- Large anvil
- Heavy duty drop forged, heat treated jaws
8. Greene MV-270-CA CB-Series Machinist Vise, Reversible Jaws, 360 degree swivel base, 3.75" Height, 6" Width, 5.5" Length
Feature
Knurled jaw facesReversible jaws
360 degree swivel base
Description
Greene Manufacturing, Inc. - Machinist Vise Reversible jaws - 360 degree swivel base - Knurled jaw faces - 5-1/2 wide jaws - 6 jaw opening - 3-3/4 throat depth.9. Wilton 21400 Machinists Vises, 5" Jaw, 3 3/4" Throat, Swivel Base
Feature
Swivel base rotates 360 degrees and has double lockdowns ensuring maximum stabilityPowder coat paint resists scratches and provides a tough durable finish
Replaceable hardened steel top and Pipe jaws
Large anvil work surface
Description
Swivel base rotates 360 Degrees and has double lockdowns ensuring maximum stability. Powder coat paint resists scratches and provides a tough durable finish. Replaceable hardened steel top and pipe jaws. Large anvil work surface.10. MINI VISE BENCH VISE with CLAMP FOR WORKBENCH MINIATURE 1-1/4" WIDE SMOOTH JAWS (15.9E) NOVELTOOLS
Feature
Mini Vise Bench Vise with clamp, fasten on and use on a Workbench, a Counter, Desk, Table or on the job in the field.The width of the jaws are 1-1/4" - 30mm wide and are both smooth. The smooth jaws make it ideal for delicate work. A vise that can be secured easily with the clamp.
Bench Vise, a Mini Vise for Machinists, Jewelers, Hobby Crafts, for the garage or workshop. Vise can be used to secure and hold small parts for repair and work.
Mini Bench Vise for: Jewelers - Hobby - Modelers - Machinist - Repair
Description
Drop-forged with a Black and Gray smooth finish. Vise Jaws Width: 1-1/4" - 30mm . Vise Jaws: Smooth Vise Length Overall: 4-5/8" - 120mm with clamp Closed Vise Height Clamped to bench: 1-3/4" - 44.5mm Vise Clamp opens: 1-1/8" / 30mm Jaws Open to a maximum of 7/8" - 24.5mm. Vise Weight is 1 Lbs. / 455grm11. Wilton 21300 Machinists' Vises, 4" Jaw, 3 7/16" Throat, Swivel Base
Feature
Swivel base rotates 360 degrees and has double lockdowns ensuring maximum stabilityPowder coat paint resists scratches and provides a tough durable finish
Replaceable hardened steel top and Pipe jaws
Large anvil work surface