If you looking for manual lubrication pump then you are right place. We are searching for the best manual lubrication pump on the market and analyze these products to provide you the best choice.
Reviews
1. Manual Lubricating Oil Pump Hand Lubrication 500CC CNC 4mm Double Outlet Port Oiler for Punching Lathe Cutting Milling Machine
Feature
WELL SEALED: This pump use high-quality seals, not easy to leak. Safe to use for oil transportation.WIDE APPLICATIONS: This lubricating manual oil pump can be widely used for punching machine, lathe machine, cutting machine, milling machine, etc.
EASY OPERATION: Pull the handle with your hand, the plunger is pushed and the oil in the cylinder is excluded. Release it, the plunger absorb the oil under the spring force.
CAN BE PART OF A LUBRICATION SYSTEM: This lubricating pump can be combined with a throttling distributor to form a lubrication system. It is recommended to use oil viscosity N20-N1000.
DURABLE: Made of high quality metal material, wear-resistant, corrosion-resistant has a long service life.
Description
Specification:Name: Manual Pump Hand
Pump material: Metal
Pump shaft position: side vertical
Impeller suction method: single suction
Drive mode: manual
Transmission medium: oil
Flow: 8m3/h
Discharge capacity: 8ml/min
Max.discharge pressure: 15kgf/cm
Capacity: 500CC
Discharge port: two port(left & right)
Weight: 949g
Package Included:
1 x Manual Lubricating Pump
2. Amarine-made Y-8 Lubricating Manual Oil Pump Hand Lubrication 0.5L CNC 6mm Double outlet port
Feature
Products are widely used in CNC machinery, milling machine, lathe machining center, production line and machine tools, forging textile, plastics, rubber, mining, metallurgy, construction, printing, chemical, pharmaceutical, casting, food and other industries machinery and equipment Lubrication system.How it works: When pulling the handle by hand, push the plunger to drain the oil that will be stored in the cylinder. When the handle is released, the plunger sucks oil under the action of spring force.
Scope: The pump can be combined with a throttling distributor to form a lubrication system. It is recommended to use oil viscosity N20-N1000.
Products use high-quality seals, not easy to leak. Handle bit with special materials, easy to break.
Description
Specification Name: Manual Pump Hand Pump material: aluminum alloy Spit: 8ml / min Maximum discharge pressure: 15Kgf / cm Fuel tank capacity: 500cc Outlet diameter: 6mm Number of ports: one on both sides Size: 145x115x200mm3. Pump Handbook
Description
Rely on the #1 Guide to Pump Design and Application-- Now Updated with the Latest Technological Breakthroughs
Long-established as the leading guide to pump design and application, the Pump Handbook has been fully revised and updated with the latest developments in pump technology. Packed with 1,150 detailed illustrations and written by a team of over 100 internationally renowned pump experts, this vital tool shows you how to select, purchase, install, operate, maintain, and troubleshoot cutting-edge pumps for all types of uses. The Fourth Edition of the Pump Handbook features:
- State-of-the-art guidance on every aspect of pump theory, design, application, and technology
- Over 100 internationally renowned contributors
- SI units used throughout the book
- New sections on centrifugal pump mechanical performance, flow analysis, bearings, adjustable-speed drives, and application to cryogenic LNG services; completely revised sections on pump theory, mechanical seals, intakes and suction piping, gears, and waterhammer; application to pulp and paper mills
Inside This Updated Guide to Pump Technology
Classification and Selection of Pumps Centrifugal Pumps Displacement Pumps Solids Pumping Pump Sealing Pump Bearings Jet Pumps Materials of Construction Pump Drivers and Power Transmission Pump Noise Pump Systems Pump Services Intakes and Suction Piping Selecting and Purchasing Pumps Installation, Operation, and Maintenance Pump Testing Technical Data4. High Pressure Manual Clamp On Grease Bucket Pump w/Cover & Follower Plate for 35LB (5 Gallon) Refinery Container. Adjustable Height & Made for Taller/Deeper Buckets
Feature
High Pressure Manual Clamp On Grease Bucket Pump (3500 psi); Adjustable Height and Made for Taller / Deeper Buckets5FT(1.52mts) High Pressure Grease Delivery Hose with hydraulic grease coupler
High Pressure Control Valve Handle with 6"(15.24CM) Rigid Extension and Grease Coupler.
Steel Pail Cover Painted in Red with screw downs and Knurl and Coupler assembly to adjust the Height to accomodate Pails from 25-50 LBS capacity.
Pump Tube Length 19.0"(48.3 cm) & Diameter 1-1/4"(3.175CM) Flared to 1-3/8"(3.5CM); Overall Height: 25-1/2"(64.8cm) FOR DEEPER 35 LB PAILS.
Description
AMZ61292DXLME; High Pressure Manual Clamp On Grease Bucket Pump Adjustable Height and Made for Taller / Deeper Buckets 1: Includes High Pressure Manual Grease Pump (3500 psi). 2: 5FT(1.52mts) High Pressure Grease Delivery Hose. 3: High Pressure Grease Coupler. 4: Develops a Max Pressure of 3500 LBS(PSI). 5: Lube Outlet: 1/2"(f)NPT. 6: Steel Pail Cover Painted in Red with screw downs and Knurl and Coupler assembly to adjust the Height to accomodate Pails from 25-50 LBS capacity. 7: Diameter to fit a standard 35LB (5 Gallon) Refinery Pail; Outer Diameter: 12-5/8"(32.1CM); Inner Diameter: 12-3/8" (31.4CM). 8: Height Adjuster (coupler) for the drum cover to adjust the level of the pump in the 35LB (5 Gallon) pail if needed. 9: Made for Taller Deeper Buckets with a Max Height of 17" (43.2 cm). 10: Pump Tube Length 19.0"(48.3 cm) & Diameter 1-1/4"(3.175CM) Flared to 1-3/8"(3.5CM); Overall Height: 25-1/2"(64.8cm) FOR DEEPER 35 LB PAILS. 11: Follower Plate with rubber outer ring; Outer Diameter: 11-1/8"((28.3CM); Includes a 5/8"(1.59CM) foldable rubber lip around the outer diameter; Inside Diameter to insert Downtube: 1-1/4"(3.175CM); Fits a standard 35LB (5 Gallon) Refinery Container; Conical or Straight Shaped. 11: Solid Cast Pump Handle 13-1/2"(34.3CM) Long x 1"(2.54CM) Diameter for long strokes and pumping leverage. Stroke Length: 3.0"(7.62CM). 12: The cover is finished in Bright Red with 3 screws to firmly affix the cover and pump to the 35 LB (5 Gallon) Original Refinery Pail. 13:. Output: .28oz/stroke or 11 oz/ min of NLGI#1 @ 80 deg F 14: Original Refinery Container not included. 15. One year Warranty against Defective Materials, Workmanship & Labor 16. All Pumps are Pressure Tested Statically and Dynamically in NLGI#2 Grease. 17. Replacement and Repair Parts Available. 18. Original Refinery Container not included. 19: Other Information: Weight and Dimensions: BOX Weight: 22LBS (9.98KG) BOX DIMS: Length: 14.0"(35.6cm) X Width:13.0"(33.02cm) X Height: 20"(50.8 cm)5. Action Pump 3005 Cast Iron Rotary Drum Pump, 10 GPM
Feature
Rotary drum pump for dispensing lubricating oils, fuel oils, and antifreezeHand-operated rotary lever action
Cast iron body, steel tubes, and Viton seals
Flow rate of 10 gpm
1" discharge spout
Description
This Action Pump 3005 hand-operated rotary pump has a cast iron body, steel intake and discharge tubes, Viton (FKM, fluoroelastomer) seals, a flow rate of 10 gallons per minute (gpm), and is suitable for dispensing lubricating oils, fuel oils, and antifreeze. It comes with a 41" suction tube assembly, a 2" bung adapter, and a curved discharge spout. This rotary lever drum pump is suitable for a wide range of industrial and commercial applications.
Specifications
| Pump | Rotary drum pump |
| Materials | Cast iron body, steel tubes, Viton seals |
| Flow rate | 10 gpm |
| Discharge port | 1" |
| Maximum temperature | 140 degrees F |
| For use with | 15, 30, and 55 gallon drums |
| Weight | 11 lb. |
| Dimensions | Overall length: 50"; Suction tube: 41" |
Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.
Action Pump manufactures drum and pail pumps and grease, oil, and lubrication products. The company, founded in 1981, is headquartered in Cary, IL.
What's in the Box?
- 3005 rotary drum pump
- Suction tube assembly
- 2" bung adapter
- Curved discharge spout
6. Tsurumi 8PN (50PN2.75S) 1hp, 115V, submersible pond & waterfall pump, stainless steel, 5550 GPH. 2" discharge
Feature
Tsurumi 1 h. P. 1/115V submersible pond pumpProduct specification - 50PN2.75S
Part number - 8Pn
Description
Tsurumi Pond & Waterfall pumps are constructed from the best materials available. Tsurumi's Pond & Waterfall pumps are known in the industries as the best in class. All Tsurumi Pumps come with a 2 year warranty. Model - 50PN2.75S Discharge Bore (in) - 2"HP - 1Weight (lbs.) - 23Cable Length (ft.) - 32Height (in) - 15 7-8Diameter (in) - 9 5/8C.W.L (in) - 4 1/8 Features & Benefits- Semi-vortex, FRP (Fiberglass Reinforced Plastic), impeller passes solids and stringy material without clogging and increases wear resistance when pump age contains abrasive particles.- Utilization of application appropriate FRP & stainless steel components increases corrosion resistance in a wide variety of applications.- Double Inside Mechanical Seal with SIC faces provides the longest operational life. - Oil Lifter provides lubrication of the seal faces. (Patent Pending)- V-Ring Seal Protector protects mechanical seal from abrasive particles.- The best Pond & Waterfall Pumps on the market Direct replacement for the 50PU2.75S (8-PU) *** All Tsurumi Pumps come standard with a 2 year warranty from date of purchase*** Mechanical Float shown as an option ***.7. Kehuashina Lubricating Manual Pump Hand Lubrication 0.5 Liter 0.5L New
Feature
Easy to install, easy to use practicalWith oil filter network, open circuit
Four holes fixed
Humanized handle design
Description
Description:1. Easy to install, easy to use practical.
2. With oil filter network, open circuit.
3. Four holes fixed.
4. Humanized handle design
Package Included:
1x Oil Pump
1x Steel pipe (4m)
1x Tubing (20m)
3x Oil separator
13x nozzle
8. EZI Action(TM) Drum Pump, Manual Hand Pump, 15 to 55 Gallons
Description
Dispense a wide range of liquids including strong acids, alkalis, mild solvents, lubricants, and oils. Designed to pump on both up and down stroke, with no wearing parts. Supplied with adapters for quick, easy installation.Note: Not for use with strong solvents, highly flammable liquids, or gasoline.Specifications:
- Item: EZI Action(TM) Drum Pump
- Type: Manual Hand Pump
- Ounces per Stroke: 15
- Container Size: 15 to 55 Gallons
- Output: 15 oz per stroke
- Extract: 15 oz per stroke
- For Use With: 15 to 55 Gallon Drums of Lubricants and Oils
- Includes: Safety Strap and Adapter"
9. Manual Lubricating Oil Pump Double Outlet, Manual Lubricator Oil Pump Accessories for CNC Engraver Machine Manual Milling Machine Punching Equipment
Feature
Lubrication Systems Oil Pump is widely application during daily life, and it can be applied in punching machine, lathe machine, cutting machine, milling machine, and etcJust pull the handle with your hand, and then the plunger is pushed and the oil in the cylinder is excluded. Release it, the plunger absorb the oil under the spring force
The Lubricating Manual Oil Pump can be combined with a throttling distributor to form a lubrication system. And it is recommended to use oil viscosity N20-N1000
This Hand Pump lubricator is made of high quality metal material, which is wear-resistant and corrosion-resistant to provide a long term service
This lubricating pump can be combined with a throttling distributor to form a lubrication system. It is recommended to use oil viscosity N20-N1000.
Description
Application
Lubrication Systems Oil Pump for Punching machine, grinding machine, milling machine, shearing machine, compound machine, cutting machine, weaving machine, etc.
Description:
1. Easy to install, easy to use practical.
2. With oil filter network, open circuit.
3. Four holes fixed.
4. Humanized handle design
5. Weight 1kg
6. Stainless steel and engineering plastic material
Package Included:
1x Oil Pump
1x Steel pipe (4m)
1x Tubing (20m)
3x Oil separator
13x nozzle
10. 3-In-1 Multi-Purpose Hand Fuel Pump Kit,Hand Siphon Pump Gas/Liquid/Air Manual Travel Emergency Vehicle Pump
Feature
It is necessary to refuel with the car. No need to suck the gasoline with your mouth anymore (hand pumping)It is suitable for all kinds of oils, water, and new elastic plastics. It can suck out the liquid after pumping a few times.
As long as the liquid can be aspirated by gas pumping, it is very convenient to let the liquid be completely withdrawn without causing waste of liquid in the container.
The straw is a hard plastic tube resistant to strong acid and alkali. It can not be bent and can be inclined at a certain angle.
Description
Simple operation method:First insert the upper tube into the desired liquid, then put the lower tube with the red tube in another container (not enough, there is a black extension tube ready ~ ~), then gently twitch a few left Pull the rod, the liquid will be easily extracted, and it can be pumped very clean!
Product List:
1 pumping cylinder Capacity: 200cc
1 oil suction pipe Length: 1.3m
1 oil pipe length: 1.3m
Tubing inner diameter: 8mm tubing outer diameter: 12mm
1 lengthened tube Length: 1.2m
Extension tube inner diameter: 3mm extension tube outer diameter: 5mm
Flow rate: 5L/min
1 gas nozzle
1 valve
3 connection sleeves
Operational notes:
1. When sucking oil, try to keep the oil outlet of the oil suction device lower than the oil inlet. After sucking out the oil, you can stop the pumping and the oil will continue to flow out automatically. . .
2. After each time the gasoline is cleaned and cleaned, please inject a small amount of oil into the suction port of the pump to keep the lubrication between the suction barrel and the rubber ring for the next use. This can effectively prevent the oil plug from wearing and prolong the oil absorption. The service life of the device.
3. This product is not suitable for the extraction of lubricating oil or other highly viscous, semi-liquid liquids.