Jrelecs F540 4370KV 4 pole 3.175mm Waterproof Brushless Motor with 45A Waterproof ESC Electronic Speed Controller for 1/10 1:10 Scale RC car WLtoys 10428/12428 HG P601

Related posts

Feature

4 pole 12 slot high-torque motor design
High purity copper windings maximizes efficiency
Precision engineered for maximum energy conversion
Precision balanced rotor,smoothness for best reliability and maximum RPM
Mutiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection

Description

The original upgrade waterproof F540 3930KV brushless motor with waterproof 45A ESC combo is designed to provide both quality and performance at an affordable price. Waterproof function motor and ESC let your car challenge the muddy road.Providing much convenience for your 1/10 RC car truck.

Motor Specifications:
- Size: 540 ( waterproof )
- Watts: 820W
- Max voltage: <13V
- Max Amps: 60A
- KV(RPM/Volt): 4370KV
- Max RPM: 50000
- Diameter: 35.8mm
- Length: 50mm
- Shaft length: 15mm
- Shaft diameter: 3.175mm
- Plug type: 4mm golden banana plug

ESC Specifications:
- Brand name: SurpassHobby
- Continue current: 45A ( waterproof )
- Burst current: 240A
- Battery: 2-3S Li-Po / 4-9S Ni-Mh Ni-Cd
- BEC output: 5.8V / 3A
- Power supply plugs: T plug male
- Motor plugs: 4mm banana plug female
- Dimension: 50 * 35 * 34mm / 2.0 * 1.4 * 1.3in (without cables)

Package List:
1 * F540 4370KV Motor
1 * Waterproof 45A Brushless ESC


NOTE:Never leave this product unsupervised when it is powered on. It's important to select the battery, Not all motor and ESC suitable for 3s lipo, It is better for 2s lipo. A wrong tooth ratio can cause the motor to overheat. The motor temperature should be lower than 212 during the operation. Temperatures above 212 will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current)!!! To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only way to prevent overheat!!!!