ZENY 858D Hot Air Gun Rework Station SMD Solder Soldering Digital 3 Nozzles

Related posts

Feature

Comfortable portable handheld and the Digital LED display
Build-in SAMSUNG Microcomputer Control, Warning-Up Quickly
One LED show gun current real Temp
Adjust the air flow and temperature control keypad
Refer to the instructions included with three kinds of nozzles (big,medium and small) replacement part.. Try to set up the temperature as lower as possible and the airflow as much as possible as to keep heating element working longer and protect IC chips

Description

Note: Please read the manual careful before use the item.
Operation Instruction:
1. To put the unsoldering equipment ready, and leave handle on the holder
2. To connect the power
3. To set the blast nozzle (large caliber nozzle preferred).
4. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED)
5. To pressor button (revolving switch )as to set up the temperature. Available in microcomputer with digital LED)
6. To turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication
7. To hold the handle, so the equipment begin to heat. To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.
Specifications:
Operating Volatge: 110V
Output Power:700W
Type of Pump & Airflow: Brushless fan with soft air
Noise: Less than 45dB
Temperature Range: 100 to 480
Air Flow: Max. 120L/min
Component Length of Handle: 120cm
Display: Digital LED
Please know that before you use the item : Put away desoldering station,connected air gun handle, the handle must be set in the handle racks,otherwise air gun will not work(it has the unique security in other parts of fire or other accidents),then turn on the air gun power switch,take up the air gun from the handle racks,adjusted air volume knob ,the desoldering station will working normally.
Package Content:
1x 858D SMD Hot Air Rework Station
1x Hot air Gun and holder
3x Nozzles(5mm,8mm,10mm)
1x IC extractor
1x Manual