SpeedyBee F4 AIO Flight Controller STM32F405 OSD Built-in Bluetooth Chip Supported Setting FC parameters via iOS and Android

Related posts

Feature

SpeedyBee F4 AIO Flight Controller: BLE Module Integrated 0 configuration. Setting the FC parameters via mobile device. (iOS 10.0+, Android 4.3+)
Built-in Bluetooth Chip: Zero configuration, connect to the SpeedyBee APP directly after powering on, easy to set the FC parameter. Support BetaFlight OSD .
MCU: STM32F405, Much better than STM32F1 and F3. MPU6000 Gyroscope More stable
Built-in LC Filter, Clear image, Reduce noise. All 5V/9V Output with LC Fliter.
PDB integrated for powering external devices, Direct power to the ESCs. Power input 3s-6s Lipo Power.

Description

Specifications

  • MCU: STM32F405
  • IMU: MPU6000
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BLE Module: Inner connect to UART5 for remote setting with SpeedyBee App or other similar apps
  • BlackBox: 2MB onboard dataflash
  • Current Sensor: 200A(Scale 302)
  • Power input: 3s - 6s Lipo
  • Power output: 4.5V * 1 , 3.3V * 1, 5V * 3 , 9V * 1
  • Cam And VTX power output: Built-in LC-Filter for 5V and 9V
  • ESC power output: 4 * VCC output
  • UART: UART Pads * 3(UART1, UART3, UART4)
  • UART2 for Receiver: Built in inverter of RX2 for SBUS input through SBUS pad, RX2 pad used for PPM, DSM2, DSMX, IBUS
  • RSSI input: RSSI input solder pad
  • I2C: Used for external GPS, Barometer module
  • Buzzer: Buz- and 5V pad used for 5V Buzzer
  • ESC signal: s1 - s7
  • LED pin: Used for WS2812 LED
  • Boot button: Used to easy enter DFU mode
  • Weight: 8.8g
  • Dimension: 36*39*7mm

Package

  • 1* SpeedyBee F4 AIO Flight controller
  • 6* M3*3+3 Nylon column
  • 6* M3 Nylon nut
  • 6* M3 Anti-vibration Gasket
  • 1* Rubycon 35V 470uf capacitor
  • 1* Manual