RFID NFC Card Copier Reader Writer duplicator English 10 Frequency Programmer for IC ID Cards and All 125kHz Cards +5pcs ID 125khz cards+5pcs ID 125kh keyfobs+5pcs 13.56mhz UID key +1USB

Related posts

Feature

Before writing a card, please make sure that the card you are writing is the same frequency as the card you are reading, and make sure that the card you are writing is writable.Support read write Frequency: 125KHz, 250KHz, 500KHz, 375KHz,625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz(ISO1443A/B),125kHz Prox cards.
Support read:EM4100/EM4200,Mifare classic,UID cards,Ultralight,Ntag203,1386/1326/1346;Support cards write: 1386/1326/1346,T5577,EM4305,Mifare UID cards.
Typical Applications:Elevator CardAccess Control System,Parking Card,Proximity card,Work Timecard ETC.
It can crack 13.56mHz encryption cards.(This device only supports partial sector encryption IC card, does not support all sectors encryption IC card).Come with decoding software (working on Windows).To crack a encryption card ,you need to connect the reade to a PC. NOTE: When you use the USB cable connect the PC, please remove the batteries at first
Powered by 4 AAA batteries(not included), easy to carry.Also can use 5V USB power supply .HD3.2 inch full color screen, the display effect is clear, ID/IC full hand, voice broadcast.Digital key input number can be directly input.

Description

How to Crack encryption 13.56Mhz cards:

Please read it carefully and follow the steps as below:

When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.

Conneted with copier with computer via USB cable,

then Press the "on/off" button,

then the copier will be show the "Disclaimer"page,

NOT press any button on the Copier,

then your computer will show a removeable disk,

open the disk,

there are the manual and the software,

Press the button "OK" to agree with the Disclaimer on the computer fistly,

then argee with the copier's "Disclaimer"page,

that's will be connect successfully,

put your original cards on the back side of the Read/Write area,

then press the button "scan"to crack the passwords,

after 2 or 5 minutes,the passwords will be cracked successfully,

then put one UID cards in the read/write area,

then press"write"button,

that will be ok.

How to copy the 125khz RFID cards:

Press the "on/off "button,

put the original 125khz cards on the back of the copier,

then the copier will be show the "Disclaimer"page,

Press "ok" button,

then put the cards on the back side of the copier,

then press"scan",

then the copier will auto scan it is 125khz cards,

and the copier will show the card number,

then we put one writable EM4305 key on the back side of the copier,

then press"Write",

then that will be write succesfully.

Package include:

1pc Handheld RFID NFC Copier Reader Writer

1pc USB cable

5pcs ID 125khz cards

5pcs UID 13.56mhz writable key

5pcs ID 125kh keyfobs