Related posts

Feature

4 in 1 electronic multi-scanner wall stud finder detection: Quickly locates edges of the pipe, metal, rebars, joists, wooden beams,wood and live AC wire behind the wall, floors and ceilings
Stud finder depth:Stud mode detects the edges and center of wood beam in wall up to 0.75 inches; Metal mode detects metal, such as pipe , rebar, and copper ,up to 1.18 inches ; AC mode detects voltage and live electrical lines up to 1.96 inches; Deep mode detects beams wood and metal parts located particularly deep up to 1.49 inches
Low battery indicator, 1x9V battery(Battery is not included). Easy to read LCD and perfect to use for private households.
How to use stud finder: Place the stud finder flat on wall first. Then press and hold the button at the left side of the device till the unit sounds a short beep "BI BI", next still hold the "PUSH" button , move the stud finder on the desired surface to scan. Note: If you can not scan the object from left to right , please try to scan up and down.
NoteIt can't work on lath, plaster walls and direct current; Detection depth can vary due to wall moisture; Item's rusty condition may affect probing results; Don't use it to detect alternating voltage in non-insulated or exposed line. If you change a new battery and it still don't work, maybe the product has not been completely discharged. So please install the battery in reverse direction for 3 seconds, and repeat this 3 times ,then install correctly.

Description

4-IN-1 Wall Stud finder :
It is an accurate stud finder detector for Metal ,Wood, live AC wire, Deep, it keeps you from damaging unforeseen objects that are hiding behind your walls. It accurately displays what type of stud you are looking for as well as its position ,perfect to use in private houshold

How to use:
First select the type you want , then click the left button scan horizontally from left to right across the wall and the scanner will make a beeping sound indicating the type location , and you can remark the location point with the pencil (The small pencil groove located at the bottom of the scanner)

Scanner depth:
Stud finder depth:Stud mode detects the edges and center of wood beam in wall up to 0.75 inches; Metal mode detects metal, such as pipe , rebar, and copper ,up to 1.18 inches ; AC mode detects voltage and live electrical lines up to 1.96 inches; Deep mode detects beams wood and metal parts located particularly deep up to 1.49 inches

Battery:
1x9V battery, not include

Note:
If you insert the battery and the product device can not work , please don't worry and here are the ways to solve it
1.Please check if the battery is run down , if yes , you should change a new battery.
2.If you changed a new battery and it still didn't work , it maybe the product has not been completely discharged .So please install the battery in reverse direction for 3 seconds , and repeat this 3 times ,then correct the installation .