Related posts

Feature

3.6 Mil Aluminum Foil: 1.6 mils (adhesive) + 2 mils (carrier) - 3 in. Core
Resist water vapor, some chemicals, flame, moisture, weather and smoke transmission.
Acts as a vapor barrier to insure the integrity of the insulation system
Thermal conductivity helps cooling and heating efficiency, improving efficiency in systems
Conformable backing and pressure sensitive rubber adhesive adheres to a variety of smooth or irregular surfaces

Description

Aluminum Foil Tape with Liner

Product Description
T.R.U. AF-20R Aluminum Foil Tape is a 2 Mil dead soft premium grade Aluminum Foil coated with an extremely aggressive synthetic rubber adhesive that provides a tight positive grab when smoothed on work surfaces; its malleable foil conforms well to irregular and curved surfaces. The T.R.U. AF-20R Aluminum foil tape is an all-weather general purpose used in fiberglass duct board systems (on seams and joints to maintain the integrity of the vapor barrier) and on FSK systems.

Applications
For heat reflection and dissipation - Masking in paint stripping and electroplating - Cover over and seal seams in Hexayurt shelters - Waterproof sealing - Sealing plastic and automation plateware (in biotech research).

Properties
Adhesive: Synthetic Rubber
Thickness: 3.6 mils (carrier[2.0] + adhesive[1.6])
Release Liner: Paper
Adhesion: 91 oz/in (to stainless steel test panel)
Tensile Strength: 17.1 lbs/in.
Elongation: 3.5%
Temperature Resistance: -4 F to 176 F
Core: 3 inch diameter

Alternative to Ideal #488; Polyken #337; Venture #3530; Shurtape #AF973; Fasson #0802; Tesa #53900.

Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).