How to buy the best 1.3 oled i2c?

We spent many hours on research to finding 1.3 oled i2c, reading product features, product specifications for this guide. For those of you who wish to the best 1.3 oled i2c, you should not miss this article. 1.3 oled i2c coming in a variety of types but also different price range. The following is the top 7 1.3 oled i2c by our suggestions:

Product Features Editor's score Go to site
HiLetgo 1.3 HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR PIC STM32
Go to amazon.com
1.3 1.3" Blue OLED Display I2C IIC Serial 128X64 LCD LED Module SH1106 for Arduino Raspberry Pi DIYmall
Go to amazon.com
HiLetgo 1.3 HiLetgo 1.3" IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32
Go to amazon.com
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino
Go to amazon.com
Diymore 1.3 Diymore 1.3" White 128x64 OLED LCD 4-Pin Display Module I2C IIC Serial Interface for Arduino
Go to amazon.com
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI
Go to amazon.com
Solu  1.3 Solu 1.3" I2c IIC Serial 128x64 White Oled LCD Display Module for Arduino/stm32/avr/51
Go to amazon.com
Related posts:

Reviews

1. HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR PIC STM32

Feature

1.3" mini OLED display screen with 128X64 resoluction and SSH1106 chipset
Ultra-low power consumption: full screen lit 0.08w
Four fixed bolt holes for easy installation
Interface Type:SPI(Can be changed to IIC)
Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC

Description

Specifications:
1. Driver IC: SSH1106
2. Resolution: 128*64
3. Viewing angle: >160
4. OLED screens inside the driver chips: SSH1106.
5. Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC
6. Ultra-low power consumption: full screen lit 0.08w
7. Voltage: DC 3V-5V
8. Work temp : -30c-70c
9. Interface: SPI
10. Font Color: White

SPI Pin definition:
GND: Power ground
VCC: Power
CLK: Clock line
MOSI: Data cable
RES: Reset line
DC: Data/commands
CS: Chip select (when not use can be grounded directly)

Package included:
1* 1.3" OLED LCD Display Module SPI Serial

Note: We have IIC I2C interface on sale too, please search at HiLetgo Store if you need.

2. 1.3" Blue OLED Display I2C IIC Serial 128X64 LCD LED Module SH1106 for Arduino Raspberry Pi DIYmall

Feature

Document link: https://drive.google.com/open?id=0B8DSGdAr8_31UEItMmx6ZDJIOWs
Supported Platforms: for arduino,raspberry pi, 51 series, MSP430 series, STIM32 / 2, SCR chips.
Support wide voltage: 3.3V-5V DC
What You Get: 1 X 1.3" Blue Oled. Our 1 Year Worry-free-warranty and Friendly Customer Service.
we offer free sample to anyone who make project

Description

Description:
Size: 1.3
Resolution: 128X64
Color: Blue
Viewing angle: greater than 160 degrees
Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SH1106
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight

Interface:
VCC: 3.3-5V
GND: Ground
SCL: Serial Clock
SDA: Serial Data

3. HiLetgo 1.3" IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD Module for Arduino AVR PIC STM32

Feature

Driver IC: SSH1106.Resolution: 128*64
Four square holes are easy to install
Ultra-low power consumption: full screen lit 0.08w
The IIC address can be changed,it is convenient to use with different machines
Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC etc

Description

Specifications:
1. Driver IC: SSH1106 or SSD1306.
2. Viewing angle: >160
3. Voltage: DC 3V-5V
4. Work temp : -30c-70c
5. Interface: IIC I2C
6. Font Color: White

IIC Pin definition:
GND: Power Ground.
VCC: Power + (DC 3.3 ~5v).
SCL: Clock Line.
SDA: Data Line.

Package included:
1* 1.3" OLED LCD Display Module IIC I2C Serial

Note: We have SPI interface on sale too, please search at HiLetgo Store if you need.

4. MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino

Feature

OLED display, no need backlight, self-illumination, Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers.
The display performance is better than the traditional LCD display, also lower consumption.
IIC (I2C communications) simplifies connections.
Use with Arduino, ESP8266, ESP32, STM32, etc; 3.35v Power;Operating temperature:-40 - 85 .
We a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking for your consultation!

Description

2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino

Description:
OLED display, no need backlight, self-illumination.
The display performance is better than the traditional LCD display, also lower consumption.

Specifications:
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
Size: 38 * 12 mm
Interface Type: IIC interface
Display Color: Blue
Pin Description:
GND: Power Ground
VCC: Power + (DC 3.3 ~5v)
Operating temperature:-40 ~ 85
SCL: Clock Line
SDA: Data Line

Package Including
2 * 0.91 Inch I2C SSD1306 OLED Blue Display Module

5. Diymore 1.3" White 128x64 OLED LCD 4-Pin Display Module I2C IIC Serial Interface for Arduino

Feature

Light Color: blue.
Interface Type: IIC.
Driving Voltage: 3.3-5V.
Controlling Chip: SSH1106.
Operating Temperature: -40~70 C.

Description

Product Introduction:

1.Size:1.3 inch

2.Resolution: 128*64

3.Controlling Chip: SSH1106

4.Display Area: 29.42*14.7mm

5.Driving Voltage: 3.3-5V

6.Operating Temperature: -40~70 celsius

7.Interface Type: IIC

8.Light Color: White

Pin Definition:

1.GND:power ground

2.VCC:power positive

3.SCL:clock wire

4.SDA:data wire

Package Include:

1 x 1.3" White OLED LCD Display Module IIC I2C Interface 128x64 3-5V For Arduino

6. UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI

Feature

UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package

Description

Name: UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED module
This OLED display module is small, only 0.96" diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project.

Features:
OLED self-luminous, no backlight
Size: 0.96"
Driver IC: SSD1306
Voltage: 3.3V-5V DC
Viewing angle: > 160
High resolution: 128 x 64
Working Temperature: -30C~70C
Display: 2 rows of yellow, 6 rows of blue
Module Size: 27mmx 27mm x 4mm
Screen material: glass, need good protection
I2C Interface:
GND: Ground
VCC: 3.3V~5V
SCL: I2C Serial Clock (UNO: A5; MEGA: 21)
SDA: I2C Serial Data (UNO: A4; MEGA: 20)

Applications:
MP3, MP4, watch
Head-mounted displays
Meters and other intelligent instruments
Design any pretty patterns for your beloved electronic devices!

Package including:
1pcs UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED Display Module

7. Solu 1.3" I2c IIC Serial 128x64 White Oled LCD Display Module for Arduino/stm32/avr/51

Feature

Usually, you will get it actually in 9~19 days, If you are in the USA and the item is NOT Fulfilled by Amazon. the item will be sent to you by USPS with shipping information from China. The estimated delivery time offered by Amazon is not the real time. Your patience is highly appreciated. Hope you will receive your item soon and enjoy using it.
About us(Solu ), Professional factory of circuit boards for Arduino, welcome to our store for more
Module Size:32.0MM*35.50MM*4.1MM I2C/IIC Interface, need 2 IO only.
Power: 3.3 to 5.0V Driver IC: SH1106
High resolution: 128 * 64

Description

If you decide to buy OLED display, you must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support.

Specifications :

Dimensions: 1.3 x 1.3 in
color : white
Display Resolution:128 x 64 px
Self-emitting light, in contrast to the required backlight for TFT-LCD
Voltage: 3V ~ 5V DC
Working Temperature: -30~70
Viewing angle:> 160
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W Module Size: 35.5MM*32.0MM*4.1MM
I2C/IIC Interface, need 2 IO only.
Driver IC: SH1106

Package Includes :

1*white 1.3" I2C IIC Serial 128X64 OLED LCD LED Display Module for Arduino *

Helpful Customer Reviews

Good solid OLED display, but has the quirk that it doesn't respond to SPI enumeration. The U8Glib library supports this with the special U8G_I2C_OPT_NO_ACK option; Google that if you're having difficulty.

Good display for a project, My unit has a SH1106 controller so I used the U8glib library. U8GLIB_SH1106_128X64(U8G_I2C_OPT_NONE) device got it running great.

Conclusion

All above are our suggestions for 1.3 oled i2c. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using 1.3 oled i2c with us by comment in this post. Thank you!