When you want to find tas5630 600, you may need to consider between many choices. Finding the best tas5630 600 is not an easy task. In this post, we create a very short list about top 9 the best tas5630 600 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 tas5630 600:
Reviews
1. SMAKN TAS5630 class D Digital Amplifier 300w + 300w 600w OPA1632DR ADCs 4ohm 100dB DC50V
Feature
Type: Class D;Quiescent Current: 65mA ;Operating efficiency: 88%Output power: 2 * 300/4 ohms, 10% THD Frequency response: 20Hz to 20KHz
Dynamic range:> 100 dB ;Signal-to-noise ratio: 100dB (A-Weighted)
Operating voltage: DC50V ;PCB size: 140 * 95MM
Description
TAS5630 class D Digital Amplifier 300w + 300w 600w OPA1632DR ADCs 4ohm 100dB DC50VOPA1632
1. analog-to-digital (ADCs).
2. 180MHz 50V/s
3. distortion: 0.000022%.
4. input noise: 1.3nV/Hz
specification:
TAS5630OPA1632DR
electronic compacitor: nichicon, 470UF/100V*4.
class D
current: 65mA
working efficiency: 88%
output2*300W/4ohm 10% THD
frequancy20Hz--20KHz
dynamic range >100 dB
SNR100dB(A-Weighted)
working voltageDC50V
PCB size140*95MM
package: one amplifier
2. Sure Electronics AA-AB31241 1x600W TAS5630 Class-D Amplifier Board
Feature
Perfect for use as a subwoofer amplifierUp to 600W of Class-D power
1.5-ohm stable
Over-engineered protection circuits
Requires 25 to 52 VDC power supply
Description
Amplifiers this powerful used to take up as much room and generate as much heat as a space heater! Up to 600W of pure Class-D power is on tap and ready for you to use this amplifier board with the meanest subwoofer you can find.3. TAS5630 + OPA1632DR + TL072 600w /4ohm Class D Digital Subwoofer Amplifier Board
Feature
quiescent current65mAworking efficiency 88%
output600W/4ohm 10% THD
frequancy response20Hz-20KHz
Dynamic range >100 dB
Description
Feature:100% brand new and high quality
Using original TAS5630, OPA1632DR, TL072
Main electrolytic capacitors with three battalions brand, capacity 470UF / 100V * 4, to ensure strong support for a steady stream of power.
Resistance selection Rings metal resistance, the main circuit employs a precision of 1% metal film resistors rings, ensure the machine a good signal to noise ratio.
Using fully shielded high-current inductors, to ensure crisp and powerful sound.
1.6mm thick sheet using double-sided PCB, 2.0 oz copper thickness, HASL whole process to ensure that the size of the current through the good performance. PCB-class quality.
Parameter:
class D
quiescent current65mA
working efficiency 88%
output600W/4ohm 10% THD
frequancy response20Hz-20KHz
Dynamic range >100 dB
S/D100dB(A-Weighted)
working votlageDC48V
PCB size(L*W)14.00*9.50cm/5.51"*3.74"
potentionmeter ( left to right) :1. subwoofer frequency 2. Volume
distance between two potentionmeter 3.4cm
wire length : 30cmm
Package:
1pc TAS5630 + OPA1632DR + TL072 600w /4ohm Class D Digital Subwoofer Amplifier Board
4. 1 X 600Watt Class D Audio Amplifier TAS5630 Combo Kit w MW 36V 350W Power Supply
Feature
Line level audio signal inputMounting holes facilitate installation and fixing
Over current protection
Excellent heat sink and powerful cooling fan eliminate your worry on heat dissipation
Built-in cooling Fan ON-OFF control
Description
This is a combo kit combined with a 1 X 600W Class D Audio Amplifier Board and a 36V 9.7A 350W Power Supply. This kit helps you build your own system in the most convenient way with full potential released of this amplifier. Great design and long-term tests combined with highly reliable PSU from Mean Well make this combo a complex of high performance and strong firmness. Meanwhile the total cost is lower than the seperated ones which makes it also a high cost-efficient option.5. TAS5630 Subwoofer Class D Amplifier Board 600W/4ohm with DC48V
Feature
Work: Class DQuiescent Current: 65mA
Output power: 600W/4 Europe 10% THD
Working voltage: DC48V
Potentiometer function: 2 volume from left to right 1
Description
TAS5630 Subwoofer Class D Amplifier Board 600W/4ohm with DC48VDetails:
1 using the original TAS5630, OPA1632DR, TL072
2 main filter electrolytic capacitors using three brand name, capacity 470UF/100V*4, to ensure a steady stream of power support.
3 resistance selection of five rings metal resistance, the main loop with precision of 1% rings of metal film resistance, to ensure that the good signal to noise ratio.
4 full shield large current inductor, to ensure that the sound is clear and strong.
5.PCB using 1.6mm thick double-sided plate, 2 a copper thickness, tin spraying process, to ensure that the size of the current through the performance of the good. First class PCB quality.
Specifications:
Working methods:class D
Quiescent current: 65mA
Work efficiency: 88%
Output power: 600W/4 Europe 10% THD
Frequency response: 20Hz to 20KHz
Dynamic range: dB >100
Signal to noise ratio: 100dB (A-Weighted)
Working voltage: DC48V
PCB size: 140*95MM
Potentiometer function: 2 volume from left to right 1
Potentiometer spacing: 34MM length 30CM
Package:
1x TAS5630 Subwoofer Class D Amplifier Board 600W/4ohm with DC48V
6. 1 X 600W Class D Audio Amplifier TAS5630 w Mean Well 36V 350W Power Supply
Feature
Line level audio signal inputSeveral wiring methods facilitate connection
Over/under voltage turn off
Excellent heat sink and powerful cooling fan eliminate your worry on heat dissipation
Built-in constant current limiting circuit control
Description
This is a combo kit combined with a 1X 600W Class-D Audio Amplifier and a Mean Well MW 36V 9.7A 350W AC/DC Switching Power Supply . This kit helps you build your own system in the most convenient way with full potential released of this amplifier. Meanwhile the total cost is lower than the seperated ones which makes it also a high cost-efficient option.7. Sure Electronics 1 X 600W 2 Ohm Class D Audio Amplifier Board - TAS5630
Feature
A perfect "Class D" architectureFully bridged
Gain adjustable-four fixed gain settings
Line level audio signal input
Mounting holes facilitate installation and fixing
Description
Big surprise! Why? A new member of Class-D audio amplifier family comes out - AA-AB31241 which is capable of delivering up to 600W amplification. This amplifier is a state-of-the-art mono amplifier which integrates TI's TAS5630 as the driver. High quality and high performance components are used making this amplifier high-quality mono amplifier. Powered by 20V to 50V supply, it can be used in many applications, such as Home Active Speaker, AV Receiver, Mini Combo System, etc.. It also features short-circuit and thermal protection. In addition, on-board heat sink and cooling fan ensures excellent heat dissipation8. AOSHIKE 600W TAS5630 Subwoofer Amplifier Board Amplificador Class D Digital Mono Audio Amplifier Board Monoblock
Feature
The original TAS5630, OPA1632DR, TL072The main filter electrolytic capacitor using three battalion brand, capacity 470uF / 100V * 4, to ensure a strong stream of dynamic support.
Resistance selection of five-ring metal resistance, the main circuit with 1% accuracy of the five-ring metal film resistors to ensure a good signal to noise ratio.
The use of full-shielded high current inductor to ensure that the sound crisp and powerful.PCB with 1.6mm thick double-sided sheet.
Description
Basic parameters:
Work: Class D
Quiescent current: 65mA
Work efficiency: 88%
Output power: 600W / 4 Europe 10% THD
Frequency response: 20Hz to 20KHz
Dynamic range:> 100 dB
Signal to noise ratio: 100dB (A-Weighted)
Operating voltage: DC48V
PCB size: 140 95mm
From left to right potentiometer function: 1. Subwoofer frequency, 2. Volume
Potentiometer spacing: 34mm
Package included:
1pcs TAS5630 Subwoofer Amplifier Board
9. HUIMAI TAS5630+OPA1632DR+TL072 Subwoofer 600W 4ohm Mono SUB Amplifier completed board+preamplifier stereo input
Feature
Condition:NewSupply Voltage.
Dissipation Power.
Operating Temperature.
is_customized:Yes
Description
Condition:NewSupply Voltage.
Dissipation Power.
Operating Temperature.
is_customized:Yes
Type:Amplifier Board
Work style: D class
Static electricity: 65 ma
Efficiency: 88%
Output power: 600 w / 4 o 10% THD
Frequency response: 20 hz to 20 KHZ
Dynamic range: > 100 dB
Signal to noise ratio: 100 db (A - Weighted)
Working voltage: DC48V
PCB size: 140 * 95 mm
Unit Type: piece
Package Weight: 0.25kg (0.55lb.)
Package Size: 15cm x 10cm x 8cm (5.91in x 3.94in x 3.15in)