Finding your suitable rfid card copier is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best rfid card copier including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Hetingprotool English 10 Frequency NFC RFID Card Copier Reader for IC ID Cards and All 125kHz Cards
Feature
The device can duplicate and write these frequencies cards:125kHz prox Card1386/1326/1346/T5577. ID card: 125 KHz, 250 KHz, 375 KHz,500 KHz, 625kHz, 750 KHz, 875 KHz, l000 KHZ. It also can crack 13.56 mHz IC card. (Only supports partial sector encryption IC card, not support all sectors encryption IC card).If your card is all sectors encryption,the device will show ''Decoding fails, please try to decode an upgraded version!''10 Frequency Copy Encrypted NFC Smart Card RFID Copier ID/IC Reader Writer,which can crack the 13.56mhz encrypted IC card.
Powered by 4 AAA batteries(not included), easy to carry.Also can use USB cable power supply.
Supported operating systems: Windows 98, ME, NT, 2000, XP, 2003, Vista,Windows XP x64, 2003 x64, Vista x64,Linux,win10,WinCE 5.0 (Windows embedded Compact).Sub-code: CTCSS 99.Range: up to 3 km(open field).Size: approx. 10 x 4 x 1.28cm.
Description
Please place order only when you are sure it works for your card.We will ship your order from US for US address with quality assurance .
How to operate this card duplicator reader?
How to write 13.56mHhz cards?
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.Connected this copier with computer via USB cable,then Press the "on/off" button,then the copier will show the "Disclaimer"page,NOT press any button on the Copier,then your computer will show a removable disk,open the disk,there are manual and the software,Press the button "OK" to agree with the Disclaimer on the computer firstly,then argee with the copier's "Disclaimer"page,that's will be connected successfully,put your original cards on the back side of the Read/Write area,then press the button "scan"to crack the passwords,after 2 or 5 minutes,the passwords will be cracked successfully,then put one cards in the read/write area,then press"write"button,that's ok.
How to copy the 125khz RFID cards
1.Press the "on/off "button,put the original 125khz cards on the back of the copier,the copier will be show the "Disclaimer"page.
2.Press "ok" button, then put the cards on the back side of the copier and press"scan".This copier will auto scan its frequency and show the card number.
3. Put one 125kHZ writable key on the back of the copier, then press"Write".It will be written successfully
2. RFID NFC Card Copier Reader Writer duplicator English 10 Frequency Programmer for IC ID Cards and All 125kHz Cards +5pcs ID 125khz cards+5pcs ID 125kh keyfobs+5pcs 13.56mhz UID key +1USB
Feature
Before writing a card, please make sure that the card you are writing is the same frequency as the card you are reading, and make sure that the card you are writing is writable.Support read write Frequency: 125KHz, 250KHz, 500KHz, 375KHz,625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz(ISO1443A/B),125kHz Prox cards.Support read:EM4100/EM4200,Mifare classic,UID cards,Ultralight,Ntag203,1386/1326/1346;Support cards write: 1386/1326/1346,T5577,EM4305,Mifare UID cards.
Typical Applications:Elevator CardAccess Control System,Parking Card,Proximity card,Work Timecard ETC.
It can crack 13.56mHz encryption cards.(This device only supports partial sector encryption IC card, does not support all sectors encryption IC card).Come with decoding software (working on Windows).To crack a encryption card ,you need to connect the reade to a PC. NOTE: When you use the USB cable connect the PC, please remove the batteries at first
Powered by 4 AAA batteries(not included), easy to carry.Also can use 5V USB power supply .HD3.2 inch full color screen, the display effect is clear, ID/IC full hand, voice broadcast.Digital key input number can be directly input.
Description
How to Crack encryption 13.56Mhz cards:Please read it carefully and follow the steps as below:
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.
Conneted with copier with computer via USB cable,
then Press the "on/off" button,
then the copier will be show the "Disclaimer"page,
NOT press any button on the Copier,
then your computer will show a removeable disk,
open the disk,
there are the manual and the software,
Press the button "OK" to agree with the Disclaimer on the computer fistly,
then argee with the copier's "Disclaimer"page,
that's will be connect successfully,
put your original cards on the back side of the Read/Write area,
then press the button "scan"to crack the passwords,
after 2 or 5 minutes,the passwords will be cracked successfully,
then put one UID cards in the read/write area,
then press"write"button,
that will be ok.
How to copy the 125khz RFID cards:
Press the "on/off "button,
put the original 125khz cards on the back of the copier,
then the copier will be show the "Disclaimer"page,
Press "ok" button,
then put the cards on the back side of the copier,
then press"scan",
then the copier will auto scan it is 125khz cards,
and the copier will show the card number,
then we put one writable EM4305 key on the back side of the copier,
then press"Write",
then that will be write succesfully.
Package include:
1pc Handheld RFID NFC Copier Reader Writer
1pc USB cable
5pcs ID 125khz cards
5pcs UID 13.56mhz writable key
5pcs ID 125kh keyfobs
3. KKmoon Handheld 125KHz RFID ID Card Writer/Copier Duplicator + 5pcs Writable T5577 Cards
4. ETEKJOY Handheld 10-Frequency RFID NFC Card Reader Writer Copier Duplicator Programmer for ID IC Cards w/ 5X 125kHz Cards, 5X 125kHz keyfobs & 5X 13.56MHz UID Key fobs
Feature
Note: It works for unencrypted cards. It does NOT work for fully-encrypted cards! By its decoding software, it may work for some of half-encrypted cards, but not all. Please read the How to Use in this listing before purchase.Support reading & writing 10 frequencies: 125kHz, 250kHz, 375kHz, 500kHz, 625kHz, 750kHz, 875kHz, 1000kHZ, 13.56MHz(ISO1443A/B), 125kHz Prox cards.
Support reading: EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, 1386/1326/1346; Support writing: 1386/1326/1346, T5577, EM4305, Mifare UID cards.
Come with decoding software (working on Windows). 3.2-inch HD color screen. English operation sound. Digital Key input.. Powered by 4 AAA batteries (not included), or by 5V USB power supply. Handheld and portable. Easy to carry around.
Applications: access control system, RFID door card, elevator card, parking card, proximity card, etc.
Description
Note: It works for unencrypted cards. It does NOT work for fully-encrypted cards! By its decoding software, it may work for some of half-encrypted cards, but not all.3.2-inch clear display screen. Working frequencies. ID cards: 125 kHz, 250 kHz, 500 kHz, 375 kHz, 625 kHz, 750 kHz, 875 kHz, 1000 kHz. IC cards: 13.56 MHz, 125 kHz prox card. Come with decoding software (Windows). English operation sound. Digital key input. Numbers can be input directly. Power supply by 4 AAA batteries (not included), or by the USB cable (5V).
Package includes: 1x ID/IC RFID Card Copier 1x USB Cable 5x 125kHz keyfobs 5x 125kHz writable cards 5x 13.56MHz UID keyfobs How to copy the 125kHz RFID card (unencrypted card): Press the power button to turn on. When the screen shows the 'Disclaimer', press OK button. Put the original card on the device's backside. Press SCAN button. The device automatically scans its frequency and read. The card number shows on the screen. Take away the original card and put a writable card/key on the device's backside. Press WRITE button. Copy completes.. How to crack the half-encrypted card: If the card is half-encrypted, please use the decoding software to crack it. Connect the device to computer via the USB cable. Press the power button to turn on. Don't press any button in the device. A removable disk pops up in your PC. Open the disk. Find the manual and the decoding software. Run the software. First, on the software interface, click the OK icon to accept the 'Disclaimer'. Then, on the device, press OK button to accept the 'Disclaimer'. Now the device and computer connect successfully. Put the original card on the device's backside. Click the software's 'Start decoding' to crack the password. It may take about 2 to 5 minutes to crack it successfully. Then put one UID card on the device's backside. Press WRITE button. Copy completes.5. English 10 Frequency RFID NFC Card Copier Reader Writer for IC ID Cards and All 125kHz Cards +13.56mhz UID Key +1USB
Feature
HD 2.9-inch color screenSupport read write frequency: 125KHz, 250KHz, 500KHz, 375KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz (ISO1443A/B), HID Prox cards.Support cards write: HID 1386/1326/1346, T5577, EM4305, Mifare UID cards.EM4100/EM4200, Mifare classic, UID cards, Ultralight, Ntag203, HID 1386/1326/1346.
Digital key input number can be directly inputted.
4 AAA batteries supply or use with USB power supply.
Please note that it can crack most but not all encryption cards.
Description
How to Crack encryption 13.56Mhz cards:Please read it carefully and follow the steps as below:
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.
Conneted with copier with computer via USB cable,
then Press the "on/off" button,
then the copier will be show the "Disclaimer"page,
NOT press any button on the Copier,
then your computer will show a removeable disk,
open the disk,
there are the manual and the software,
Press the button "OK" to agree with the Disclaimer on the
computer fistly,
then argee with the copier's "Disclaimer"page,
that's will be connect successfully,
put your original cards on the back side of the Read/Write area,
then press the button "scan"to crack the passwords,
after 2 or 5 minutes,the passwords will be cracked successfully,
then put one UID cards in the read/write area,
then press"write"button,
that will be ok.
How to copy the 125khz RFID cards:
Press the "on/off "button,
put the original 125khz cards on the back of the copier,
then the copier will be show the "Disclaimer"page,
Press "ok" button,
then put the cards on the back side of the copier,
then press"scan",
then the copier will auto scan it is 125khz cards,
and the copier will show the card number,
then we put one writable EM4305 key on the back side of the copier,
then press"Write",
then that will be write succesfully.
Package include:
1pc *Handheld RFID NFC Copier Reader Writer
1pc *USB cable
5pcs *ID 125khz cards
5pcs *UID 13.56mhz writable key
5pcs *ID 125kh keyfobs
6. English 10 Frequency ID/IC RFID Copier Reader Writer +125KHZ Rewritable Cards
Feature
Specifications : Sub-code: CTCSS 99 Range: up to 3 km(open field)Size: approx. 10 x 4 x 1.28cm
- Windows 98, ME, NT, 2000, XP, 2003, Vista
- Windows XP x64, 2003 x64, Vista x64
Linux Mac 10.5. Mac 10.6 WinCE 5.0 (Windows embedded Compact)
Description
Description:1.HD screen,with clear display.
2.ID/IC full hand, voice broadcast
. 3.Can replicate these frequencies of the ID card: 125 KHz, 250 KHz, 500 KHz, 375 KHz, 625kHz,750 KHz, 875 KHz, l000 KHZ. IC card: 13.56 MHz. 125kHz prox Card.
4.Digital key input number can be directly input
. 5.4 AAA batteries, standard mobile phone, easy to carry. Also can use USB line power supply.(battery is not included)
6.Comes decoding, direct preparation of various types of smart card access door.
Package included:
1*ID/IC RFID Copier Reader
1* USB Cable
10* 125KHZ keyfbobs
10* 125KHZ writable cards
10* 13.56MHZ UID keyfobs
How to Crack encryption 13.56Mhz cards:
Please read it carefully and follow the steps as below:
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.Conneted with copier with computer via USB cable,then Press the "on/off" button,then the copier will be show the "Disclaimer"page,NOT press any button on the Copier,then your computer will show a removeable disk,open the disk,there are the manual and the software,Press the button "OK" to agree with the Disclaimer on the computer fistly,then argee with the copier's "Disclaimer"page,that's will be connect successfully,put your original cards on the back side of the Read/Write area,then press the button "scan"to crack the passwords,after 2 or 5 minutes,the passwords will be cracked successfully,then put one UID cards in the read/write area,then press"write"button,that's will be ok.
7. ETEKJOY Handheld 125KHz RFID ID Card Reader Writer Copier Duplicator + 5PCS Writable Key Fobs/Tags
Feature
Note: It works for unencrypted 125kHz RFID cards/tags only! Not work for other frequencies. Not work for encrypted cards like HID iClass.It can copy 125kHz RFID ID cards with EM4305, EM4100, T5577 CET5200, 6610, 8210.
Reading distance is 0 - 6cm. Built-in buzzer and LED indicator.
Handheld and portable design. Working independently. Easy to use, read & write.
Powered by 2x AAA battery(not included). With 5x writable key fobs.
Description
ETEKJOY Handheld 125kHz RFID ID Card Writer Reader Copier Duplicator + 5PCS Writable Key Fobs * Note: It works for unencrypted 125kHz RFID cards/tags only! Not work for other frequencies. Not work for encrypted cards like HID iClass. * It can copy 125kHz RFID ID cards with EM4305, EM4100, T5577 CET5200, 6610, 8210. * Reading distance is 0 - 6cm. Built-in buzzer and LED indicator. * Handheld and portable design. Working independently. Easy to use, read & write. * Powered by 2x AAA battery(not included). With 5x writable key fobs. This item is a handheld RFID ID card writer, which can copy 125kHz ID cards and key fobs easily. You can use it to create a clone card from the mother card. So, you get a new card or backup card for multiple use, like door entry identification, attendance checking, etc. It is widely used at home, school, office and other access control needed places. How to use: 1. Switch on. Power led flashes one second. 2. Put the original RFID ID card in the reading area. 3. Press Read button. Read led flashes with beep sounds. 4. Put a writable RFID card in the reading area. 5. Press Write button. Write led flashes with beep sounds. 6. Copy completes. Package Includes: 1x RFID ID Writer/Copier (battery not included) 1x User Manual 5x Writable Key Fobs8. KKmoon Handheld 125KHz RFID ID Card Writer/Copier Duplicator + 10pcs Writable EM4305 Key Cards
Feature
Portable 125KHz RFID ID Card writer/copier with 10pcs writable cards.Handheld shape design, comfortable hand feeling.
Can copy 125KHz RFID ID cards with EM4305.
Built-in buzzer and LED.
Reading distance is 0 - 6cm.
Description
Overview:
This item is a handheld RFID ID card(not IC card) writer, which can be used to copy
125KHZ ID(not IC) cards with our EM4305 cards easily, so that you can get couple of same ID cards for more multiple use, like door entry access identification,
attendance checking, etc.
It is widely used at home, school, office and other access control needed places.
Features:
*Portable 125KHz RFID ID(not IC) Card writer/copier with 10pcs writable cards.
*Handheld shape design, comfortable hand feeling.
*Can copy 125KHz RFID ID cards with EM4305.
*Built-in buzzer and LED.
*Reading distance is 0 - 6cm.
About Use:
1. Switch on, power led flashes one second.
2. Put RFID ID Card(not IC Card) in read area.
3. Press read button, read led flashes with beep sounds.br>
4. Put RFID card(EM4305) to be wrote in read area.
5. Press write button, write led flashes with beep sounds.
6. Copy done.
Specifications:
Frequency: 125KHz
Power Supply: 2*AAA battery(not included)
Reading Distance: RFID Key Card/2.5cm; RFID Card/6cm
Dimensions: Approx. 4.72*2.76*1.18in / 12*7*3cm
Package Information:
Package Size: Approx. 5.31*3.27*1.57in / 13.5*8.3*4cm
Package Weight: Approx. 4.94oz / 140g
9. KKmoon Handheld 125KHz RFID ID Card Writer/Copier Duplicator + 10pcs Writable EM4305 Key Cards
Feature
Portable 125KHz RFID ID Card(Not IC Card) writer/copier with 10pcs writable cards.
Handheld shape design, comfortable hand feeling.
Can copy 125KHz RFID ID cards(Not IC Card) with EM4305.
Built-in buzzer and LED.
Reading distance is 0 - 6cm
Description
Overview:
This item is a handheld RFID ID card(not IC card) writer, which can be used to copy
125KHZ ID(not IC) cards with our EM4305 cards easily, so that you can get couple of same ID cards for more multiple use, like door entry access identification,
attendance checking, etc.
It is widely used at home, school, office and other access control needed places.
Features:
*Portable 125KHz RFID ID(not IC) Card writer/copier with 10pcs writable cards.
*Handheld shape design, comfortable hand feeling.
*Can copy 125KHz RFID ID cards with EM4305.
*Built-in buzzer and LED.
*Reading distance is 0 - 6cm.
About Use:
1. Switch on, power led flashes one second.
2. Put RFID ID Card(not IC Card) in read area.
3. Press read button, read led flashes with beep sounds.br>
4. Put RFID card(EM4305) to be wrote in read area.
5. Press write button, write led flashes with beep sounds.
6. Copy done.
Specifications:
Frequency: 125KHz
Power Supply: 2*AAA battery(not included)
Reading Distance: RFID Key Card/2.5cm; RFID Card/6cm
Dimensions: Approx. 4.72*2.76*1.18in / 12*7*3cm
Package Information:
Package Size: Approx. 5.31*3.27*1.57in / 13.5*8.3*4cm
Package Weight: Approx. 4.94oz / 140g
10. fosa Handheld 125 Khz EM4100 RFID ID Card Copier/Writer/Readers/Duplicator + 6 Writable Tags + 6 Cards
Feature
Mini-type handheld mold, ergonomic characteristics, easy to carryOnly ''Read'' and ''Write'' two buttons, easy to operate
Adopting advanced chip, product integration is higher, more stable and reliable
Excellent program algorithm and circuit design reduce the power consumption and prolong battery life (Battery is not included in the package)
Widely used at community, school, office and other access control needed places
Description
Description:This device is used to copy and duplicate the 125 Khz EM4100 ID Card for backup purpose. Excellent program algorithm and circuit design are adopted. You can copy all ID(EM4100) Cards with this RFID copier. Portable size, easy to carry.
Specifications:
Frequency: 125 KHz
Support: EM4100 / EM410X
Copy Times: >20,000 Times
Battery Type: 2 * AAA Battery (Not included)
Size: Approx. 11.5 * 7 * 3cm / 4.6 * 2.8 * 1.2in
Weight: Approx. 162g
Package List:
1 * RFID Copier Without Battery
6 * Writable Key Tags
6 * Writable Cards (EM4305)
1 * User Munual