Finding your suitable plaster molds 3d is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best plaster molds 3d including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Wave Plastic Molds for 3D Panels Plaster wall stone Form 3D decor panels
Feature
Our molds for 3d panels are made of impact-resistant ABS plasticSuitable for home casting and business.
The period of exploitation is 200-500 gypsum castings.
Low cost of finished gypsum 3 d panel
Shapes perfectly interlocked with each other
Description
Form for the manufacture of 3d panels "Wawe" 3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined. At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete. Form characteristics Size: 55 * 55 centimeters Weight: 0.55 kg Material: ABS plastic Number of fills: 500 We recommend using gypsum for casting G-10, G-15, G-16, the ratio of 2 kg of gypsum to 1 liter of water. Characteristics of the finished 3d panel Size: 50 * 50 centimeters 19,68" 19,68" Thickness 2.5 cm Area: 0,25 m22. Digital Art Rio 12 plastic with rubber sheets molds for plaster 3d walls
Feature
easy extraction of plaster shapes, low priceDescription
Plastic molds with rubber blanket for gypsum boards or cement. EASIER TO EXTRACT PLASTER SHAPES. THE QUALITY OF SILICONE WITH PLASTIC PRICE. THE BEST OF TWO WORLDS FOR YOU TO PRODUCE WITH HIGH DEFINITION WITH ECONOMIC PRICE. With this technology, there is no stress to remove the stones from the shapes.3. Plastic Mold for 3D Panels Plaster wall stone 3D decor wall panel SANTA LUCIA Wall Decor
Feature
Our molds for 3d panels are made of impact-resistant ABS plasticSuitable for home casting and business.
The period of exploitation from 200+ gypsum castings
Low cost of finished gypsum 3D panel
1 pcs
Description
Form for the manufacture of 3d panels, 3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined.At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete.
How to make 3d panels?
1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.
4. WAVE 3D WALL PANEL MOLD PLASTER Wall Art Decor Decorative Wall tile Panels #3D02
Feature
Sold one multiple mold ( FOTO 2 ) for making WAVE 3D panel for wall.Size mold : 19,68" 19,68" ( 500 500 )
Molds are made of plastic thickness 1.8 - 2mm
+FREE DELIVERY airmail shipping with tracking number
Description
Sold one multiple mold ( FOTO 2 ) for making WAVE 3D panel for wall. Size mold : 19,68" 19,68" ( 500 500 ) Molds are made of plastic thickness 0.8 mm. Depending on the geometry of the product wall thickness can form less than the above dimensions. Try to find an innovative way to add some different style to your wall? Using the mold you can get a modern 3D wall panels. 3D wall panels can be integrated in a variety of modern decors, and turn a plain interior room in exclusive. +FREE DELIVERY airmail shipping with tracking number FEEDBACK: Positive feedback and good reviews is so important to our business. If you had a good experience please leave positive feedback. If you ever have a problem or issue please contact me via amazon messaging. I am easy to work with and am very proactive in finding a solution for you.5. PYRAMID Mold for Plaster 3D Decorative Wall Panels,1 pcs ABS Plastic mold
Feature
Our molds for 3d panels are made of impact-resistant ABS plasticSuitable for home casting and business.
The period of exploitation from 200+ gypsum castings
Low cost of finished gypsum 3D panel
1 pcs
Description
Form for the manufacture of 3d panels, 3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined.At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete.
How to make 3d panels?
1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.
6. Plastic mold for 3d decor wall panels #40, for plaster (gypsum) or concrete
Feature
- Really easy to make by your own! Our molds the best way to save money and have unique interior!- Endures fills 200+ you can cover 520+ sq ft with only one mold!
- Unique design
Description
How to make 3d panels? 1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface. 2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum). 3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture. 4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel. 5. Look at the panel edges and remove bevels with putty knife if they appeared. 6. Leave panel to dry in a warm place (face side down or in vertical position) 7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.7. Plastic mold for 3d decor wall panels #15, for plaster (gypsum) or concrete
Feature
- Really easy to make by your own! Our molds the best way to save money and have unique interior!- Endures fills 200+ you can cover 520+ sq ft with only one mold!
- Unique design
- Length 50 cm /19.6 in
- Width 50 cm /19.6 in
Description
How to make 3d panels? 1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface. 2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum). 3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture. 4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel. 5. Look at the panel edges and remove bevels with putty knife if they appeared. 6. Leave panel to dry in a warm place (face side down or in vertical position) 7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.8. Branch Plastic Molds for 3D Panels Plaster wall stone Form 3D decor wall panels
Feature
Our molds for 3d panels are made of impact-resistant ABS plasticSuitable for home casting and business.
The period of exploitation from 200+ gypsum castings
Low cost of finished gypsum 3D panel
Description
Form for the manufacture of 3d panels, 3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined.At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete.
How to make 3d panels?
1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.
9. Bubbl Plastic Molds for 3 D Panels Plaster wall stone Form 3D decor wall panels
Feature
Our molds for 3d panels are made of impact-resistant ABS plasticSuitable for home casting and business.
The period of exploitation from 200+ gypsum castings
Low cost of finished gypsum 3D panel
1 pcs
Description
Form for the manufacture of 3d panels, 3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined.At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete.
How to make 3d panels?
1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.
10. Mold Plaster Concrete Cement 1Pcs Abs Plastic Form for Decorative Wall Panel LILIUM
Feature
Our molds for 3d panels are made of impact-resistant ABS plasticSuitable for home casting and business.
The period of exploitation from 200+ gypsum castings
Low cost of finished gypsum 3D panel
1 pcs
Description
Form for the manufacture of 3d panels, 3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined.At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete.
How to make 3d panels?
1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.